Problem with configuring freeradius for WPA
sankalpk
sankalpk at tulip.net
Tue Feb 24 16:20:19 CET 2009
Dear All,
I've been trying to autheticate a Wireless Acess Point through a Radius
Server for last 1 month, but things doesn't seem to be working for me.
The Radius Server is authenticating when I test it with the radtest
command. It also worked for a Cisco 2950 switch. But no luck when I use
the Access Point. I have tried 3 different accesspoints, including
Linksys, D-Link and the Firepro, but none of them worked.
I do not get any error when I check the radius in debug mode. It says
"Sending Access-Challange to ....", but the client doesn't get
authenticated. I seriously need help on this.
1. Do I really need certificates for authentication? Is there a way to
achieve WPA with UserName and Password, without installing certificates?
2. Should the AP send "User-Password" attribute to the Radius Server? Or
should the Radius Server send an Access-Challange to the AP, and AP does
matching and all.
Can somebody help me with a working solution of freeradius with AP?
Following are the configurations files and the output I am getting while
testing.
Would appreciate quick response from someone.
Thanks and Regards,
SaN
_/*Radius Version 1.1.7*/_
************
/_*radiusd.conf*_/
************
checkrad = ${sbindir}/checkrad
security {
max_attributes = 200
reject_delay = 1
status_server = no
}
proxy_requests = yes
$INCLUDE ${confdir}/proxy.conf
$INCLUDE ${confdir}/clients.conf
snmp = no
$INCLUDE ${confdir}/snmp.conf
modules {
pap {
auto_header = yes
}
chap {
authtype = CHAP
}
pam {
pam_auth = radiusd
}
unix {
cache = no
cache_reload = 600
radwtmp = ${logdir}/radwtmp
}
$INCLUDE ${confdir}/eap.conf
mschap {
}
realm IPASS {
format = prefix
delimiter = "/"
ignore_default = no
ignore_null = no
}
realm suffix {
format = suffix
delimiter = "@"
ignore_default = no
ignore_null = no
}
realm realmpercent {
format = suffix
delimiter = "%"
ignore_default = no
ignore_null = no
}
realm ntdomain {
format = prefix
delimiter = "\\"
ignore_default = no
ignore_null = no
}
checkval {
item-name = Calling-Station-Id
check-name = Calling-Station-Id
data-type = string
}
authorize {
preprocess
chap
mschap
suffix
files
}
authenticate {
Auth-Type PAP {
pap
}
Auth-Type CHAP {
chap
}
Auth-Type MS-CHAP {
mschap
}
unix
eap
}
preacct {
preprocess
acct_unique
suffix
files
}
post-proxy {
eap
}
***********
_/*eap.conf*/_
***********
eap {
default_eap_type = tls
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
md5 {
}
leap
{
}
gtc {
auth_type = PAP
}
tls {
private_key_password = 1234
certificate_file = ${raddbdir}/certs/server_keycert.pem
CA_file = ${raddbdir}/certs/cacert.pem
dh_file = ${raddbdir}/certs/dh
random_file = ${raddbdir}/certs/random
fragment_size = 1024
include_length = yes
}
mschapv2 {
}
}
**************
/_*clients.conf*_/
**************
client 192.168.104.10 {
secret = testing100
shortname = firepro
nastype = other
}
**************
/_*users*_/
***************
"sankalpk" User-Password := "mjreturns"
*****************
/_*radiusd -X output:*_/
*****************
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1645
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: bind_address = 192.168.104.201 IP address [192.168.104.201]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "tls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/usr/local/etc/raddb/certs/server_keycert.pem"
tls: certificate_file = "/usr/local/etc/raddb/certs/server_keycert.pem"
tls: CA_file = "/usr/local/etc/raddb/certs/cacert.pem"
tls: private_key_password = "1234"
tls: dh_file = "/usr/local/etc/raddb/certs/dh"
tls: random_file = "/usr/local/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication 192.168.104.201:1645
Listening on accounting 192.168.104.201:1646
Ready to process requests.
_/*As I try to connect to the AP through a Windows Vista Client:*/_
rad_recv: Access-Request packet from host 192.168.104.168:3082, id=10,
length=158
User-Name = "sankalpk"
NAS-IP-Address = 192.168.1.254
NAS-Port = 0
Called-Station-Id = "00-21-DE-00-17-B2:Wireless"
Calling-Station-Id = "00-19-D2-AD-4A-BF"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x0201000d0173616e6b616c706b
Message-Authenticator = 0x932ae386762803662714a332a5b35fab
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "sankalpk", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 13
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry sankalpk at line 95
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 10 to 192.168.104.168 port 3082
EAP-Message = 0x010200060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xe1fca91bd45ab011bb1d2be124a4a7f6
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.104.168:3082, id=10,
length=158
Sending duplicate reply to client firepro:3082 - ID: 10
Re-sending Access-Challenge of id 10 to 192.168.104.168 port 3082
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 10 with timestamp 49a40ea8
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.104.168:3082, id=10,
length=158
User-Name = "sankalpk"
NAS-IP-Address = 192.168.1.254
NAS-Port = 0
Called-Station-Id = "00-21-DE-00-17-B2:Wireless"
Calling-Station-Id = "00-19-D2-AD-4A-BF"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x0201000d0173616e6b616c706b
Message-Authenticator = 0x932ae386762803662714a332a5b35fab
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "sankalpk", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 13
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry sankalpk at line 95
modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 10 to 192.168.104.168 port 3082
EAP-Message = 0x010200060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x64df003490d42bf16e7fc57ee4c9afde
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
DISCLAIMER: This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may containconfidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly prohibited and may be unlawful. The recipient acknowledges that Tulip Telecom Limited is unable to exercise control or ensure or guarantee the integrity of/overthe contents of the information contained in e-mail transmissions and further acknowledges that any views expressed in this message are those of the individual sender and no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of Tulip Telecom Limited. Before opening any attachments please check them for viruses!
and defects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090224/b5e8a0c3/attachment.html>
More information about the Freeradius-Users
mailing list