server selection

[Alan DeKok]

Norbert Wegener wrote:
> freeradius 2.1.1, configured to use multiple virtual servers, seems to
> select the server to use  depending on the host sending the request, not
> depending on the   NAS-IP-Address in the request.

  Yes.  See raddb/sites-available/README.  When a client is tied to a
virtual server, it is done by source IP address.

> I would have expected, the server is choosen because of the NAS-IP-Address.

  That configuration can be added manually, by doing internal proxying
to the virtual server.

  Alan DeKok.