802.1x problems

[tnt at kalik.net]

There are comments about eDirectory in ldap module configuration file.
You might need to rebuild the server.

Ivan Kalik
Kalik Informatika ISP


Dana 15/1/2009, "Danner, Mearl" <jmdanner at samford.edu> piše:

>The passwords need to be extracted from eDirectory and passed to
>freeradius.
>
>
>This guide is old - I haven't seen what needs to be done with the
>freeradius config, but it will tell you what you need to do on the
>Novell end.
>
>http://freeradius.org/doc/radiusadmin.pdf
>
>Mearl
>
>-----Original Message-----
>From: freeradius-users-bounces+jmdanner=samford.edu at lists.freeradius.org
>[mailto:freeradius-users-bounces+jmdanner=samford.edu at lists.freeradius.o
>rg] On Behalf Of Keith Ledford
>Sent: Thursday, January 15, 2009 2:41 PM
>To: FreeRadius users mailing list
>Subject: Re: 802.1x problems
>
>On Thursday, January 15, 2009 at 20:36:00, tnt at kalik.net wrote:
>> Where is his password supposed to be? Ldap auth can't work with
>mschap,
>> so you need to send the password to freeradius. You need to enable
>ldap
>> instances in inner-tunnel virtual server (that will be doing mschap
>> auth).
>
>The passwords are in the ldap server (Novell). I don't understand what
>you mean by
>
>"so you need to send the password to freeradius"
>
>Can you either explain or point me to the proper doc? If ldap auth
>can't work with mschap what does everyone do to work with standard
>windows clients?
>
>I did enable ldap in the inner-tunnel config file. I did miss that
>before. Thanks!
>
>
>
>--
>Keith Ledford <kledford AT uga DOT edu>
>Network Administrator
>EITS Network Engineering
>706.542.0723 phone
>-
>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>