Cisco Aironet 1130ag dynamic VLAN assignment

[tnt at kalik.net]

>I have modified eap.conf and added "use_tunneled_reply = yes" in the
>peap section. I have previously tried this, and obtained the same
>results. Whenever a client tries to login, they get cycled from
>authenticating/connecting very quickly. I've posted an example output
>from a radius debug: http://dpaste.com/112927/
>

You are getting an Access-Accept with VLAN attributes now:

Sending Access-Accept of id 199 to 10.0.0.254 port 1645
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Type:0 = VLAN
        Tunnel-Private-Group-Id:0 = "100"
        User-Name = "wgraeber"
        MS-MPPE-Recv-Key =
0x8d9a0e99e52c18b817039f9d503bbd00d66c3cf3927d2528460                   
                         7bb4c52ab58f1
        MS-MPPE-Send-Key =
0x5b07ed87b3ddd6c9fe6186c9443d80cca1b7e24f393f854f585                   
                         59d26a1100bfb
        EAP-Message = 0x030a0004
        Message-Authenticator = 0x00000000000000000000000000000000

But AP is unhappy. Do debug dot11 aaa and see what is it complaining
about. It's missing something (probably Service-Type).

Ivan Kalik
Kalik Informatika ISP