using nasid instead of client ip..

[Oguzhan Kayhan]

Ignore previous msg..Problem solved.my mistake..

:))
I just forgot the config.bck file on sites-enabled directory..so even i
reconfigure the file it was still reading from the old one...



>>> And now when i try to run second different client software on same
>>> server,
>>> because the client ip still 192.168.0.15 it uses same virtual server on
>>> radius.
>>> Is there any other way to use different virtual server according to
>>> nasip
>>> for example???
>>
>> You mean NAS-Identifier? Yes. Create two virtual home servers (lets say
>> NAS1 and NAS2, see proxy.conf). Then use unlang or users file to
>> separate
>> requests:
>>
>> if (NAS-IP-Address == "192.168.0.15) {
>>      if (NAS-Identifier == "NAS1") {
>>           update control {
>>                Proxy-To-Realm := "NAS1"
>>           }
>>      elsif (NAS-Identifier == "NAS2" {
>> ...
>>
>> Ivan Kalik
>> Kalik Informatika ISP
>
> Hello,
> I tried the following configuration on sites-enabled
>
> listen {
>                         ipaddr = 192.168.10.91
>                         port = 1815
>                         type = auth
>                         virtual_server = dormnet
>        }
>
> listen {
>                         ipaddr = 192.168.10.95
>                         port = 1814
>                         type = auth
>                         virtual_server = wireless
>        }
>
>
>  server wireless {
>                  authorize {.............
>
> }
>
>  server dormnet {
>                  authorize { .............
> }
>
> client 192.168.16.145 {
>         shortname       = test-client
>         secret          = xxxxxx
> }
> -----------------------------------------------------------
>
> I got the output as follows when i run freeradius as debug mode.
>
>
> ...
> ....
> .....
> Listening on authentication address * port 1812
> Listening on accounting address * port 1813
> Listening on authentication address * port 1821
> Listening on authentication address 139.179.10.91 port 1815 as server
> wireless
> Listening on authentication address 139.179.10.95 port 1814 as server
> dormnet
> Listening on proxy address * port 1816
> Ready to process requests.
> ---------------------------------------------------
> First of all before explaining my problem i think it is about the default
> freeradius listening on * port 1812..
> How will i disable that??
>
> And my problem.
> I set my clients radius settings as 192.168.10.95 1814 and 192.168.10.91
> 1815  but both authenticated for the settings of wireless virtualserver.
>
> What can be the problem???
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>