mysql errors when running freeradius

JamesWhetherly jameswhetherly at hotmail.com
Thu Jun 11 10:41:03 CEST 2009


I have been following the mysql guide on the freeradius wiki for handling of
users. I've had a few problems along the way and i can get radius accepting
test packs not using mysql. I am using openSUSE 11.1.

 When i now try to launch radius it is coming up with mysql errors, and i
can't figure out why and what it's trying to do. One thing to note is that i
install mysql after i installed freeradius, and I'm unsure whether this
could be a problem too. I have also read that you need the mysql-devel
files, which from looking in yast i do not have, and can not locate. 

The debug code can be found below.

----->
linux-6pfg:/etc/raddb # radiusd -X
FreeRADIUS Version 2.1.1, for host i686-suse-linux-gnu, built on Dec  3 2008
at 10:47:13
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2. 
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/sql.conf
including configuration file /etc/raddb/sql/mysql/dialup.conf
including configuration file /etc/raddb/sql/mysql/counter.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/radius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/radius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	allow_core_dumps = no
	pidfile = "/var/run/radiusd/radiusd.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
	stripped_names = no
	auth = no
	auth_badpass = no
	auth_goodpass = no
 }
 security {
	max_attributes = 200
	reject_delay = 1
	status_server = yes
 }
}
 client localhost {
	ipaddr = 127.0.0.1
	require_message_authenticator = no
	secret = "testing123"
	nastype = "cisco"
 }
 client 130.24.222.27/24 {
	require_message_authenticator = no
	secret = "testing123-1"
	shortname = "private-network-1"
 }
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
	retry_delay = 5
	retry_count = 3
	default_fallback = no
	dead_time = 120
	wake_all_if_all_dead = no
 }
 home_server localhost {
	ipaddr = 127.0.0.1
	port = 1812
	type = "auth"
	secret = "testing123"
	response_window = 20
	max_outstanding = 65536
	zombie_period = 40
	status_check = "status-server"
	ping_interval = 30
	check_interval = 30
	num_answers_to_alive = 3
	num_pings_to_alive = 3
	revive_interval = 120
	status_check_timeout = 4
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
	wait = no
	input_pairs = "request"
	shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
	reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
	reply-message = "You are calling outside your allowed timespan  "
	minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
	encryption_scheme = "auto"
	auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
	use_mppe = yes
	require_encryption = no
	require_strong = no
	with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
	radwtmp = "/var/log/radius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
	default_eap_type = "md5"
	timer_expire = 60
	ignore_unknown_eap_types = no
	cisco_accounting_username_bug = no
	max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
	challenge = "Password: "
	auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
	rsa_key_exchange = no
	dh_key_exchange = yes
	rsa_key_length = 512
	dh_key_length = 512
	verify_depth = 0
	pem_file_type = yes
	private_key_file = "/etc/raddb/certs/server.pem"
	certificate_file = "/etc/raddb/certs/server.pem"
	CA_file = "/etc/raddb/certs/ca.pem"
	private_key_password = "whatever"
	dh_file = "/etc/raddb/certs/dh"
	random_file = "/etc/raddb/certs/random"
	fragment_size = 1024
	include_length = yes
	check_crl = no
	cipher_list = "DEFAULT"
	make_cert_command = "/etc/raddb/certs/bootstrap"
    cache {
	enable = no
	lifetime = 24
	max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
	default_eap_type = "md5"
	copy_request_to_tunnel = no
	use_tunneled_reply = no
	virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
	default_eap_type = "mschapv2"
	copy_request_to_tunnel = no
	use_tunneled_reply = no
	proxy_tunneled_request_as_eap = yes
	virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
	with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
	format = "suffix"
	delimiter = "@"
	ignore_default = no
	ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
	usersfile = "/etc/raddb/users"
	acctusersfile = "/etc/raddb/acct_users"
	preproxy_usersfile = "/etc/raddb/preproxy_users"
	compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
	filename = "/var/log/radius/radutmp"
	username = "%{User-Name}"
	case_sensitive = yes
	check_with_nas = yes
	perm = 384
	callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
	attrsfile = "/etc/raddb/attrs.access_reject"
	key = "%{User-Name}"
  }
 }
}
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
	huntgroups = "/etc/raddb/huntgroups"
	hints = "/etc/raddb/hints"
	with_ascend_hack = no
	ascend_channels_per_line = 23
	with_ntdomain_hack = no
	with_specialix_jetstream_hack = no
	with_cisco_vsa_hack = no
	with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_sql
 Module: Instantiating sql
  sql {
	driver = "rlm_sql_mysql"
	server = "localhost"
	port = ""
	login = "radius"
	password = "freepass"
	radius_db = "radius"
	read_groups = yes
	sqltrace = no
	sqltracefile = "/var/log/radius/sqltrace.sql"
	readclients = yes
	deletestalesessions = yes
	num_sql_socks = 5
	sql_user_name = "%{User-Name}"
	default_user_profile = ""
	nas_query = "SELECT id, nasname, shortname, type, secret FROM nas"
	authorize_check_query = "SELECT id, username, attribute, value, op          
FROM radcheck           WHERE username = '%{SQL-User-Name}'           ORDER
BY id"
	authorize_reply_query = "SELECT id, username, attribute, value, op          
FROM radreply           WHERE username = '%{SQL-User-Name}'           ORDER
BY id"
	authorize_group_check_query = "SELECT id, groupname, attribute,          
Value, op           FROM radgroupcheck           WHERE groupname =
'%{Sql-Group}'           ORDER BY id"
	authorize_group_reply_query = "SELECT id, groupname, attribute,          
value, op           FROM radgroupreply           WHERE groupname =
'%{Sql-Group}'           ORDER BY id"
	accounting_onoff_query = "          UPDATE radacct           SET             
acctstoptime       =  '%S',              acctsessiontime    = 
unix_timestamp('%S') -                                   
unix_timestamp(acctstarttime),              acctterminatecause = 
'%{Acct-Terminate-Cause}',              acctstopdelay      = 
%{%{Acct-Delay-Time}:-0}           WHERE acctstoptime IS NULL           AND
nasipaddress      =  '%{NAS-IP-Address}'           AND acctstarttime     <=
'%S'"
	accounting_update_query = "           UPDATE radacct           SET             
framedipaddress = '%{Framed-IP-Address}',              acctsessiontime     =
'%{Acct-Session-Time}',              acctinputoctets     =
'%{%{Acct-Input-Gigawords}:-0}'  << 32 |                                   
'%{%{Acct-Input-Octets}:-0}',              acctoutputoctets    =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |                                   
'%{%{Acct-Output-Octets}:-0}'           WHERE acctsessionid =
'%{Acct-Session-Id}'           AND username        = '%{SQL-User-Name}'          
AND nasipaddress    = '%{NAS-IP-Address}'"
	accounting_update_query_alt = "           INSERT INTO radacct            
(acctsessionid,    acctuniqueid,      username,              realm,           
nasipaddress,      nasportid,              nasporttype,      acctstarttime,    
acctsessiontime,              acctauthentic,    connectinfo_start,
acctinputoctets,              acctoutputoctets, calledstationid,  
callingstationid,              servicetype,      framedprotocol,   
framedipaddress,              acctstartdelay,   xascendsessionsvrkey)          
VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',             
'%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}',              '%{NAS-Port-Type}',              DATE_SUB('%S',                      
INTERVAL (%{%{Acct-Session-Time}:-0} +                                
%{%{Acct-Delay-Time}:-0}) SECOND),                      
'%{Acct-Session-Time}',              '%{Acct-Authentic}', '',             
'%{%{Acct-Input-Gigawords}:-0}' << 32 |             
'%{%{Acct-Input-Octets}:-0}',              '%{%{Acct-Output-Gigawords}:-0}'
<< 32 |              '%{%{Acct-Output-Octets}:-0}',             
'%{Called-Station-Id}', '%{Calling-Station-Id}',             
'%{Service-Type}', '%{Framed-Protocol}',             
'%{Framed-IP-Address}',              '0', '%{X-Ascend-Session-Svr-Key}')"
	accounting_start_query = "           INSERT INTO radacct            
(acctsessionid,    acctuniqueid,     username,              realm,           
nasipaddress,     nasportid,              nasporttype,      acctstarttime,   
acctstoptime,              acctsessiontime,  acctauthentic,   
connectinfo_start,              connectinfo_stop, acctinputoctets, 
acctoutputoctets,              calledstationid,  callingstationid,
acctterminatecause,              servicetype,      framedprotocol,  
framedipaddress,              acctstartdelay,   acctstopdelay,   
xascendsessionsvrkey)           VALUES             ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',             
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',             
'%{NAS-Port-Type}', '%S', NULL,              '0', '%{Acct-Authentic}',
'%{Connect-Info}',              '', '0', '0',             
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',             
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',             
'%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
	accounting_start_query_alt = "           UPDATE radacct SET             
acctstarttime     = '%S',              acctstartdelay    =
'%{%{Acct-Delay-Time}:-0}',              connectinfo_start =
'%{Connect-Info}'           WHERE acctsessionid  = '%{Acct-Session-Id}'          
AND username         = '%{SQL-User-Name}'           AND nasipaddress     =
'%{NAS-IP-Address}'"
	accounting_stop_query = "           UPDATE radacct SET             
acctstoptime       = '%S',              acctsessiontime    =
'%{Acct-Session-Time}',              acctinputoctets    =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |                                  
'%{%{Acct-Input-Octets}:-0}',              acctoutputoctets   =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |                                  
'%{%{Acct-Output-Octets}:-0}',              acctterminatecause =
'%{Acct-Terminate-Cause}',              acctstopdelay      =
'%{%{Acct-Delay-Time}:-0}',              connectinfo_stop   =
'%{Connect-Info}'           WHERE acctsessionid   = '%{Acct-Session-Id}'          
AND username          = '%{SQL-User-Name}'           AND nasipaddress      =
'%{NAS-IP-Address}'"
	accounting_stop_query_alt = "           INSERT INTO radacct            
(acctsessionid, acctuniqueid, username,              realm, nasipaddress,
nasportid,              nasporttype, acctstarttime, acctstoptime,             
acctsessiontime, acctauthentic, connectinfo_start,             
connectinfo_stop, acctinputoctets, acctoutputoctets,             
calledstationid, callingstationid, acctterminatecause,             
servicetype, framedprotocol, framedipaddress,              acctstartdelay,
acctstopdelay)           VALUES             ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',             
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',             
'%{NAS-Port-Type}',              DATE_SUB('%S',                  INTERVAL
(%{%{Acct-Session-Time}:-0} +                  %{%{Acct-Delay-Time}:-0})
SECOND),              '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',             
'%{Connect-Info}',              '%{%{Acct-Input-Gigawords}:-0}' << 32 |             
'%{%{Acct-Input-Octets}:-0}',              '%{%{Acct-Output-Gigawords}:-0}'
<< 32 |              '%{%{Acct-Output-Octets}:-0}',             
'%{Called-Station-Id}', '%{Calling-Station-Id}',             
'%{Acct-Terminate-Cause}',              '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}',              '0',
'%{%{Acct-Delay-Time}:-0}')"
	group_membership_query = "SELECT groupname           FROM radusergroup          
WHERE username = '%{SQL-User-Name}'           ORDER BY priority"
	connect_failure_retry_delay = 60
	simul_count_query = ""
	simul_verify_query = "SELECT radacctid, acctsessionid, username,                               
nasipaddress, nasportid, framedipaddress,                               
callingstationid, framedprotocol                                FROM radacct                               
WHERE username = '%{SQL-User-Name}'                                AND
acctstoptime IS NULL"
	postauth_query = "INSERT INTO radpostauth                          
(username, pass, reply, authdate)                           VALUES (                          
'%{User-Name}',                          
'%{%{User-Password}:-%{Chap-Password}}',                          
'%{reply:Packet-Type}', '%S')"
	safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql_mysql: MYSQL check_error: 1146 received
rlm_sql (sql): database query error, SELECT id, nasname, shortname, type,
secret FROM nas: Table 'radius.nas' doesn't exist
rlm_sql (sql): Released sql socket id: 4
Failed to load clients from SQL.
rlm_sql (sql): Closing sqlsocket 4
rlm_sql (sql): Closing sqlsocket 3
rlm_sql (sql): Closing sqlsocket 2
rlm_sql (sql): Closing sqlsocket 1
rlm_sql (sql): Closing sqlsocket 0
/etc/raddb/sql.conf[22]: Instantiation failed for module "sql"
/etc/raddb/sites-enabled/default[152]: Failed to find module "sql".
/etc/raddb/sites-enabled/default[62]: Errors parsing authorize section. 
 }
Errors initializing modules


Thanks for reading

-- 
View this message in context: http://www.nabble.com/mysql-errors-when-running-freeradius-tp23977490p23977490.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.




More information about the Freeradius-Users mailing list