MAC Authentication

[Steve Wu]

Thanks, tried that, still no go.

How does FR know to look at the users file? Should I see something in the debug that's it's looking for local (users) authentication? Seems like it's missing that step.

Thx - Steve

----- Original Message -----
From: "Kenneth Grady" <klg at lanl.gov>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Sent: Thursday, June 11, 2009 12:50:26 PM GMT -05:00 US/Canada Eastern
Subject: Re: MAC Authentication

case counts, try adding the entry in your users file with lowercase.

Steve Wu wrote:
> Everyone -
>
> I'm being a bit brain dead most likely. I have been tinkering with
> Freeradius and MAC authentication successfully. Now I have a real
> server to build FR on so I proceeded to build the new server. After
> going through the *same* steps to build FR, duplicating the
> clients.conf and users file, I can't get the auth to work again. In my
> notes these were the two files I touched to get it going, but I'm
> hoping I missed something simple.
>
> My -Xy output looks like this:
>
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> rad_recv: Access-Request packet from host 10.10.18.208:1030, id=16,
> length=53
>         User-Name = "000e35-84610a"
>         User-Password = "000e35-84610a"
>   Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 1
>   modcall[authorize]: module "preprocess" returns ok for request 1
>   modcall[authorize]: module "chap" returns noop for request 1
>   modcall[authorize]: module "mschap" returns noop for request 1
>     rlm_realm: No '@' in User-Name = "000e35-84610a", looking up realm
> NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 1
>   rlm_eap: No EAP-Message, not doing EAP
>   modcall[authorize]: module "eap" returns noop for request 1
>   modcall[authorize]: module "files" returns notfound for request 1
> rlm_pap: WARNING! No "known good" password found for the user. 
> Authentication may fail because of this.
>   modcall[authorize]: module "pap" returns noop for request 1
> modcall: leaving group authorize (returns ok) for request 1
> auth: No authenticate method (Auth-Type) configuration found for the
> request: Rejecting the user
> auth: Failed to validate the user.
> Delaying request 1 for 1 seconds
> Finished request 1
> Going to the next request
> Waking up in 1 seconds...
>
> My users file:
>
> 000E35-84610A Cleartext-Password := "000E35-84610A"
>
>
> Any help to recover from my brain lapse would be greatly appreciated.
> Did I miss some other config tweak so it's looking at the user file?
>
> Thx in advance!
>
>
>
>
> ------------------------------------------------------------------------
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html