MAC Authentication

[Steve Wu]

OK, it took a server reboot for FR to see the change in the users file. Case does count. Brain dead, thanks for giving me the nudge... it's all good now, onto MySQL and Daloradius...


----- Original Message -----
From: "Kenneth Grady" <klg at lanl.gov>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Sent: Thursday, June 11, 2009 12:50:26 PM GMT -05:00 US/Canada Eastern
Subject: Re: MAC Authentication

case counts, try adding the entry in your users file with lowercase.

Steve Wu wrote:
> Everyone -
>
> I'm being a bit brain dead most likely. I have been tinkering with
> Freeradius and MAC authentication successfully. Now I have a real
> server to build FR on so I proceeded to build the new server. After
> going through the *same* steps to build FR, duplicating the
> clients.conf and users file, I can't get the auth to work again. In my
> notes these were the two files I touched to get it going, but I'm
> hoping I missed something simple.
>
> My -Xy output looks like this:
>
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> rad_recv: Access-Request packet from host 10.10.18.208:1030, id=16,
> length=53
>         User-Name = "000e35-84610a"
>         User-Password = "000e35-84610a"
>   Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 1
>   modcall[authorize]: module "preprocess" returns ok for request 1
>   modcall[authorize]: module "chap" returns noop for request 1
>   modcall[authorize]: module "mschap" returns noop for request 1
>     rlm_realm: No '@' in User-Name = "000e35-84610a", looking up realm
> NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 1
>   rlm_eap: No EAP-Message, not doing EAP
>   modcall[authorize]: module "eap" returns noop for request 1
>   modcall[authorize]: module "files" returns notfound for request 1
> rlm_pap: WARNING! No "known good" password found for the user. 
> Authentication may fail because of this.
>   modcall[authorize]: module "pap" returns noop for request 1
> modcall: leaving group authorize (returns ok) for request 1
> auth: No authenticate method (Auth-Type) configuration found for the
> request: Rejecting the user
> auth: Failed to validate the user.
> Delaying request 1 for 1 seconds
> Finished request 1
> Going to the next request
> Waking up in 1 seconds...
>
> My users file:
>
> 000E35-84610A Cleartext-Password := "000E35-84610A"
>
>
> Any help to recover from my brain lapse would be greatly appreciated.
> Did I miss some other config tweak so it's looking at the user file?
>
> Thx in advance!
>
>
>
>
> ------------------------------------------------------------------------
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html