Wireless-802.11 vs. Ethernet and MSCHAP vs. EAP-TLS
Roman Osinski
r.osinski at ihar.edu.pl
Tue Jun 16 22:41:15 CEST 2009
I have working, fresh FreeRADIUS 2.1.6 configuration with certificates for
EAP-TLS in wireless network - Access-Accept with real AP and eapol_test
tool. An attempt to use this environment (except NAS) for wired network -
this same client (MS Vista), server and certs unfortunately doesn't work
(logs below). Changing authentication protocol to MSCHAP allow to
authenticate client. Can anybody explain this? I include also tcpdump udp
log with wire EAP-TLS and MSCHAP attempts.
Roman
FreeRADIUS Version 2.1.6, for host x86_64-redhat-linux-gnu, built on Jun 13
2009 at 22:31:21
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/control-socket
group = radiusd
user = radius
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib64"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 82.177.110.0/24 {
require_message_authenticator = no
secret = "testing123"
shortname = "net1"
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 82.177.110.254 port 1031, id=5,
length=125
EAP-Message = 0x02e500090175736572
NAS-Port-Type = Ethernet
User-Name = "user"
NAS-IP-Address = 192.168.167.10
NAS-Port = 2
Framed-MTU = 1000
NAS-Port-Id = "Port 2"
Calling-Station-Id = "00-21-70-88-3f-c1"
Called-Station-Id = "00-30-4f-64-76-eb"
Message-Authenticator = 0xdaed83fa984e5b449d2b5ade2aa3d1ed
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "user", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 229 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 5 to 82.177.110.254 port 1031
EAP-Message = 0x01e600160410a0cbb341372205eb554eb0b2cd249087
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa0f2d08ba014d4d73e9644301c3ef096
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 82.177.110.254 port 1031, id=6,
length=140
EAP-Message = 0x02e60006030d
State = 0xa0f2d08ba014d4d73e9644301c3ef096
NAS-Port-Type = Ethernet
User-Name = "user"
NAS-IP-Address = 192.168.167.10
NAS-Port = 2
Framed-MTU = 1000
NAS-Port-Id = "Port 2"
Calling-Station-Id = "00-21-70-88-3f-c1"
Called-Station-Id = "00-30-4f-64-76-eb"
Message-Authenticator = 0x4a5f43f0ed7660b314de11cd14d2f8a4
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "user", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 230 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/tls
[eap] processing type tls
[tls] Requiring client certificate
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 6 to 82.177.110.254 port 1031
EAP-Message = 0x01e700060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa0f2d08ba115ddd73e9644301c3ef096
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 82.177.110.254 port 1031, id=7,
length=249
EAP-Message =
0x02e700730d800000006916030100640100006003014a37f2d9d81d2e724b64f5a53b2b84ed
2627b68d7ef8bdc4a2bdcb9d59e9f19a000018002f00350005000ac009c00ac013c014003200
38001300040100001f00000009000700000475736572000a00080006001700180019000b0002
0100
State = 0xa0f2d08ba115ddd73e9644301c3ef096
NAS-Port-Type = Ethernet
User-Name = "user"
NAS-IP-Address = 192.168.167.10
NAS-Port = 2
Framed-MTU = 1000
NAS-Port-Id = "Port 2"
Calling-Station-Id = "00-21-70-88-3f-c1"
Called-Station-Id = "00-30-4f-64-76-eb"
Message-Authenticator = 0x6f3b0b9d224a69919e7d33f3ae7a7935
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "user", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 231 length 115
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/tls
[eap] processing type tls
[tls] Authenticate
[tls] processing EAP-TLS
TLS Length 105
[tls] Length Included
[tls] eaptls_verify returned 11
[tls] (other): before/accept initialization
[tls] TLS_accept: before/accept initialization
[tls] <<< TLS 1.0 Handshake [length 0064], ClientHello
[tls] TLS_accept: SSLv3 read client hello A
[tls] >>> TLS 1.0 Handshake [length 002a], ServerHello
[tls] TLS_accept: SSLv3 write server hello A
[tls] >>> TLS 1.0 Handshake [length 085e], Certificate
[tls] TLS_accept: SSLv3 write certificate A
[tls] >>> TLS 1.0 Handshake [length 00a5], CertificateRequest
[tls] TLS_accept: SSLv3 write certificate request A
[tls] TLS_accept: SSLv3 flush data
[tls] TLS_accept: Need to read more data: SSLv3 read client certificate
A
In SSL Handshake Phase
In SSL Accept mode
[tls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 7 to 82.177.110.254 port 1031
EAP-Message =
0x01e803e40dc00000093c160301002a0200002603014a37f2d973f3e9b88d4843387565dbd3
9f0f6d058fef1b23a1ca2a53b3ed715f00002f00160301085e0b00085a0008570003a6308203
a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
6d706c6520436572746966696361746520417574686f72697479
EAP-Message =
0x301e170d3039303631363138333933395a170d3130303631363138333933395a307c310b30
09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
0100b5fed94d3f89e8354b4675953ecf5079731ed6c764f6e8463b76b57f1f467c3573951438
678735f1e16a4dc60c29b8627ba68bf7ad7fc726c00fd81f38bf
EAP-Message =
0xde473e29474eacd059a054b6e50af989ba9a52b7428bbc739bb2fd61c628eddd1e262d44ab
80166dfbdbc9600c3e25347db96882921ee1dc9726e8359d37151267d0c79401d3a96c3e443f
2ffaaa18fb7d9342669fe8df3efd3fba51f6d5ca0db45186f59140aed4fc46e69432cc8faf78
9fcd3c1ae84369fb20768195b9a2166ac70e5f0b1a4dfd0cd360dc9401cdc6257071d38d777d
889fc1440863538193c173d3385c1e59f6b987522088aa3f1ec0fa7a1648872ccd5b7cbd91c2
91d26161510203010001a317301530130603551d25040c300a06082b06010505070301300d06
092a864886f70d01010405000382010100559f537cd2d6155201
EAP-Message =
0x4a35ace62804b09e3c149f09770968d8f3f6749c1c88f3d6fb5b53cf56a1b077d37dd37e82
e480568b04170e075499b422930842ba9e96247a1ba4d462e9237cf64f06da96b90b3c7c9619
ad368be68377e9d1f3c1069f53334753bda754958bb3b285e188f0022085301e7576de7d5d53
51a4eccbcdd825ea39015633c03f7989ffd54ec4568b0c917fe8d90659794958a2cb1c2b8e7e
a80abcb46935819e6f896488e66dd9e9a5129609cde5914c35bce6beca6f40955d464ede3eb7
a58ece7fa46a00cf1a67fddf2e0f313d1da121eff97fb7b8181b8cd80e2db4f5c33125fd4154
6910edb6cb302641b015
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa0f2d08ba21addd73e9644301c3ef096
Finished request 2.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 82.177.110.254 port 1031, id=8,
length=140
EAP-Message = 0x02e800060d00
State = 0xa0f2d08ba21addd73e9644301c3ef096
NAS-Port-Type = Ethernet
User-Name = "user"
NAS-IP-Address = 192.168.167.10
NAS-Port = 2
Framed-MTU = 1000
NAS-Port-Id = "Port 2"
Calling-Station-Id = "00-21-70-88-3f-c1"
Called-Station-Id = "00-30-4f-64-76-eb"
Message-Authenticator = 0x3aa4dd5a2f13b1b0d46bd4f96a0cb57c
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "user", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 232 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/tls
[eap] processing type tls
[tls] Authenticate
[tls] processing EAP-TLS
[tls] Received TLS ACK
[tls] ACK handshake fragment handler
[tls] eaptls_verify returned 1
[tls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 8 to 82.177.110.254 port 1031
EAP-Message =
0x01e903e40dc00000093cd7d1933106981e3106ec0004ab308204a73082038fa00302010202
0900e6180639daca988e300d06092a864886f70d0101050500308193310b3009060355040613
024652310f300d060355040813065261646975733112301006035504071309536f6d65776865
726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01
0901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c
6520436572746966696361746520417574686f72697479301e170d3039303631363138333933
395a170d3130303631363138333933395a308193310b30090603
EAP-Message =
0x55040613024652310f300d060355040813065261646975733112301006035504071309536f
6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a86
4886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d45
78616d706c6520436572746966696361746520417574686f7269747930820122300d06092a86
4886f70d01010105000382010f003082010a0282010100bae0132e85b4d333eb0f938649b9ff
cdd3c4df1d9b95fbfdc27da949c4a57f0688afa287526b00e5dfe42a51dff2c7cb830ced5900
e07fff582e0f0f24e70c08651d3c421a4146ec205d5e780b7c18
EAP-Message =
0xe09d7762de128f4d81bb4e02634472257b8c97d6f8a31ecce8ac469875897a773bbeb313b9
9c3cc26e53ae8320a703cef8a09f10e3746150bed9a60b65954403e832066de56f5a5d04337b
cb81b1c3ba52694bb1f17fe0e04835cdf15af01d40ae566aa5f74e8d54c14bd74d036d896b16
bc2a53a4bb76dde6d6568b9f9b2022b7ab97f266aaf31bd433789746f6d1b2ca988c29a3d740
6ab34673e3d972564199e72dc37fce778d9c6b719380d7663b970203010001a381fb3081f830
1d0603551d0e04160414bec5f6ac11f03b47a83f222fbe6396bb420561973081c80603551d23
0481c03081bd8014bec5f6ac11f03b47a83f222fbe6396bb4205
EAP-Message =
0x6197a18199a48196308193310b3009060355040613024652310f300d060355040813065261
646975733112301006035504071309536f6d65776865726531153013060355040a130c457861
6d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c
652e636f6d312630240603550403131d4578616d706c65204365727469666963617465204175
74686f72697479820900e6180639daca988e300c0603551d13040530030101ff300d06092a86
4886f70d010105050003820101007ae730871704240abb7b5691e3157fc0e3ea6e8bd92e5e91
dede737b1f256939b062
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa0f2d08ba31bddd73e9644301c3ef096
Finished request 3.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 82.177.110.254 port 1031, id=9,
length=140
EAP-Message = 0x02e900060d00
State = 0xa0f2d08ba31bddd73e9644301c3ef096
NAS-Port-Type = Ethernet
User-Name = "user"
NAS-IP-Address = 192.168.167.10
NAS-Port = 2
Framed-MTU = 1000
NAS-Port-Id = "Port 2"
Calling-Station-Id = "00-21-70-88-3f-c1"
Called-Station-Id = "00-30-4f-64-76-eb"
Message-Authenticator = 0xa930851fd6fe884a0ddc9807e3e5b400
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "user", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 233 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/tls
[eap] processing type tls
[tls] Authenticate
[tls] processing EAP-TLS
[tls] Received TLS ACK
[tls] ACK handshake fragment handler
[tls] eaptls_verify returned 1
[tls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 9 to 82.177.110.254 port 1031
EAP-Message =
0x01ea01920d800000093c24bf9b2dff50e61be23fe43da862089bc076cba926f213a5866b8e
12bc81a0f89bae8541c8358e892bf9ab5752b626221fdac94d5083347646cf8113eba7da61dd
4a83ac68eebbc38f3c0e6eff9ef3c74352ebebed0e630d4a3cb320c6405068fea521004e981b
8bcabfb2e28cf3857ccb4f66693d667c7103467264cc8cb2236d5d170141b64b9b27ad156e72
82e175a740f996b020c008ff1d8a0b88e8e752b74d06c4b91d9426ef35450894731f383d96ca
d66078dfbbd7c5c8a0f344bd497d111cc1b111c286dd3c05e0e0b920bf5eceb5ee4285bece6e
89722d50ac16030100a50d00009d02010200980096308193310b
EAP-Message =
0x3009060355040613024652310f300d06035504081306526164697573311230100603550407
1309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e
06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126302406035504
03131d4578616d706c6520436572746966696361746520417574686f726974790e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa0f2d08ba418ddd73e9644301c3ef096
Finished request 4.
Going to the next request
Waking up in 4.6 seconds.
rad_recv: Access-Request packet from host 82.177.110.254 port 1031, id=10,
length=132
State = 0xa0f2d08ba418ddd73e9644301c3ef096
NAS-Port-Type = Ethernet
User-Name = "user"
NAS-IP-Address = 192.168.167.10
NAS-Port = 2
Framed-MTU = 1000
NAS-Port-Id = "Port 2"
Calling-Station-Id = "00-21-70-88-3f-c1"
Called-Station-Id = "00-30-4f-64-76-eb"
Message-Authenticator = 0xfbc6c2b85d0058ca9db53c130e84189c
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "user", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
rlm_eap: EAP-Message not found
[eap] Malformed EAP Message
++[eap] returns fail
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> user
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 5 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 5
Sending Access-Reject of id 10 to 82.177.110.254 port 1031
Waking up in 3.5 seconds.
tcpdump udp
EAP-TLS
21:30:33.053733 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x06 length: 64
21:30:33.134032 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x07 length: 1060
21:30:33.230737 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x08 length: 1060
21:30:33.328955 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x09 length: 462
21:30:34.426570 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Reject (3), id: 0x0a length: 20
MSCHAP
21:33:43.143857 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x0b length: 80
21:33:43.188373 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x0c length: 64
21:33:43.240048 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x0d length: 1060
21:33:43.336123 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x0e length: 1056
21:33:43.432084 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x0f length: 295
21:33:43.516841 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x10 length: 123
21:33:52.560700 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x11 length: 101
21:33:52.604671 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x12 length: 117
21:33:52.656651 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x13 length: 149
21:33:52.704461 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Challenge (11), id: 0x14 length: 101
21:33:52.749780 IP primer02.ihar.edu.pl.radius > ihar_254.ihar.edu.pl.iad2:
RADIUS, Access Accept (2), id: 0x15 length: 165
More information about the Freeradius-Users
mailing list