Cannot Authenticate - Help!

[Filipe Scalioni]

Hi,

I'm new to FreeRadius, and I'm having some hard time to put it to
work. Simply talking: I can authenticate from my linux (Suse 11.1)
using radtest, directly linked to the server (LAN). Here is the
answer:

protagoras:~ # radtest teste teste 192.168.10.113:1812 1812 testing123
Sending Access-Request of id 240 to 192.168.10.113 port 1812
        User-Name = "teste"
        User-Password = "teste"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 1812
rad_recv: Access-Accept packet from host 192.168.10.113 port 1812,
id=240, length=20

So, it works... But then I put the AP to work (Linksys wrt54g),
configured like this:

Security mode: WPA Enterprise
WPA Algorithms: TKIP
RADIUS Server Address: 192.168.10.113 - this is my RADIUS server IP
RADIUS Port: 1812
Shared Key: testing123
Key Renewal Timeout: 3600 seconds

All good, but when I try to connect from Windows XP, Vista or 7,
configured like this

Network Authentication: WPA
Data Encryption: TKIP
EAP Type: PEAP
Authentication Method: MsCHAPv2
Not sending my windows login parameters

It nevers authenticates... No matter what I do. I tried everything I
could find on the list or FAQ before registering. Here goes the log

[root at testecent raddb]# radiusd -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/raddb/proxy.conf
Config:   including file: /etc/raddb/clients.conf
Config:   including file: /etc/raddb/snmp.conf
Config:   including file: /etc/raddb/eap.conf
 main: prefix = "/usr"
 main: localstatedir = "/var"
 main: logdir = "/var/log/radius"
 main: libdir = "/usr/lib"
 main: radacctdir = "/var/log/radius/radacct"
 main: hostname_lookups = no
 main: snmp = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 1812
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/radius/radius.log"
 main: log_auth = yes
 main: log_auth_badpass = yes
 main: log_auth_goodpass = yes
 main: pidfile = "/var/run/radiusd.pid"
 main: bind_address = 192.168.10.113 IP address [192.168.10.113]
 main: user = "radiusd"
 main: group = "radiusd"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "clear"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = yes
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "/path/to/ntlm_auth --request-nt-key
--username=%{Stripped-User-Name:-%{User-Name:-None}}
--challenge=%{mschap:Challenge:-00}
--nt-response=%{mschap:NT-Response:-00} --domain=%{mschap:NT-Domain}"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded LDAP
 ldap: server = "ldap.your.domain"
 ldap: port = 389
 ldap: net_timeout = 1
 ldap: timeout = 4
 ldap: timelimit = 3
 ldap: identity = ""
 ldap: tls_mode = no
 ldap: start_tls = no
 ldap: tls_cacertfile = "(null)"
 ldap: tls_cacertdir = "(null)"
 ldap: tls_certfile = "(null)"
 ldap: tls_keyfile = "(null)"
 ldap: tls_randfile = "(null)"
 ldap: tls_require_cert = "allow"
 ldap: password = ""
 ldap: basedn = "o=My Org,c=UA"
 ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
 ldap: base_filter = "(objectclass=radiusprofile)"
 ldap: default_profile = "(null)"
 ldap: profile_attribute = "(null)"
 ldap: password_header = "(null)"
 ldap: password_attribute = "(null)"
 ldap: access_attr = "dialupAccess"
 ldap: groupname_attribute = "cn"
 ldap: groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
 ldap: groupmembership_attribute = "(null)"
 ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap"
 ldap: ldap_debug = 0
 ldap: ldap_connections_number = 5
 ldap: compare_check_items = no
 ldap: access_attr_used_for_allow = yes
 ldap: do_xlat = yes
 ldap: set_auth_type = yes
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x96835d0
Module: Instantiated ldap (ldap)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded files
 files: usersfile = "/etc/raddb/users"
 files: acctusersfile = "/etc/raddb/acct_users"
 files: preproxy_usersfile = "/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Listening on authentication 192.168.10.113:1812
Listening on accounting 192.168.10.113:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.10.40:2373, id=0, length=182
        Message-Authenticator = 0xfa745a613580068b4534b34cf22f8724
        Service-Type = Framed-User
        User-Name = "backup"
        Framed-MTU = 1488
        Called-Station-Id = "00-1D-7E-5F-DF-AB:Metasys-Desktop"
        Calling-Station-Id = "00-15-AF-CF-FE-DB"
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 54Mbps 802.11g"
        EAP-Message = 0x0200000b016261636b7570
        NAS-IP-Address = 192.168.10.40
        NAS-Port = 1
        NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    users: Matched entry DEFAULT at line 152
    users: Matched entry DEFAULT at line 171
  modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
  rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_unix: Attribute "User-Password" is required for authentication.
  modcall[authenticate]: module "unix" returns invalid for request 0
modcall: leaving group authenticate (returns invalid) for request 0
auth: Failed to validate the user.
Login incorrect: [backup/<no User-Password attribute>] (from client
Linksys port 1 cli 00-15-AF-CF-FE-DB)
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to 192.168.10.40 port 2373
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 4a490f7e
Nothing to do.  Sleeping until we see a request.


I have no idea how to fix it to make it read the password. I know it's
authenticating as last method in my NIS, and it works flawlessly over
the LAN with other linux client, like I said in the begining. Any help
would be really appreciated, I need this to finish my Graduation!

Thanks!