Radius+Huwaei switch + auto VLan Assignment issue

[Attou eric]

Thanks very much for your answers. In our eap section, we had the following :

     copy_request_to_tunnel = no
     use_tunneled_reply = no

Since we change these to :

    copy_request_to_tunnel = yes    
    use_tunneled_reply = yes

The Access-Accept message send VLAN attributes as below :

Sending Access-Accept of id 43 to 192.168.100.5 port 5001
        Framed-Protocol = PPP
        Framed-Compression = Van-Jacobson-TCP-IP
        Tunnel-Private-Group-Id:0 = "2"
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Type:0 = VLAN
        User-Name = "toto"
        MS-MPPE-Recv-Key = 0x69f0f1c436ccbe11df23099070ca2c3ceb6116c3246344a8d2c78c96a68fa146
        MS-MPPE-Send-Key = 0x6aad292ef955ae61e910e51a9ae7d2b903f5e123c48dc4cc0e12f713490d2aa3
        EAP-Message = 0x030b0004
        Message-Authenticator = 0x00000000000000000000000000000000
Mon Jun 22 16:08:39 2009 : Debug: Finished request 10.
Mon Jun 22 16:08:39 2009 : Debug: Going to the next request
Mon Jun 22 16:08:39 2009 : Debug: Waking up in 4.0 seconds.

  Unfortunatly, the switch still not switching the port from VLAN 1 to VLAN 2. Maybe 

there is other misconfigurations on our switch or another settings in radius configurations ?

Any ideas to help please! 

Best regards.


    




________________________________
De : "A.L.M.Buxey at lboro.ac.uk" <A.L.M.Buxey at lboro.ac.uk>
À : FreeRadius users mailing list <freeradius-users at lists.freeradius.org>
Envoyé le : Lundi, 22 Juin 2009, 11h29mn 47s
Objet : Re: Radius+Huwaei switch + auto VLan Assignment issue

hi,

have you set the copy tunnel = yes for the PEAP section in eap.conf?

alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090622/632b8b0d/attachment.html>