radclient:: Failed to find IP address for dhcppc0

[vnsquall]

Hi everyone, i'm a newbie for configuring radius and i have some problems
when i try to use radtest to test the freeradius-server-2.1.3.
I have installed by following commands:
	$ ./configure --prefix=/usr/local/freeradius
	$ make
	$ make install
Everything is OK and i type: [root at localhost ~]#
/usr/local/freeradius/sbin/radiusd -X
..................................
..................................
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.

After that, on another shell command, i try to test with radtest:
/usr/local/freeradius/bin/radtest test test 127.0.0.1 0 testing123
radclient:: Failed to find IP address for dhcppc0
radclient: Nothing to send.

I try to test with ping command:
[root at dhcppc0 ~]# ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.046 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.046 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.050 ms
64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.044 ms
^C
--- 127.0.0.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.044/0.046/0.050/0.007 ms

-All the others conf file is the default setting.

Thank you for any try to help me!!!!




-- 
View this message in context: http://www.nabble.com/radclient%3A%3A-Failed-to-find-IP-address-for-dhcppc0-tp22585629p22585629.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.