freeradius and mikrotik auth problem pppoe error 691
Lazar Cherveniakov
lazkom at mail.bg
Wed Mar 18 22:53:50 CET 2009
Sorry i`m new mail-list user
While tracking installed following instructions
http://abills.net.ua/wiki/doku.php?id=abills:docs_03:install:en[1]
the all debug log is
# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 2
main: max_requests = 102400
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl pre_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (pre_auth)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded detail
detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
exec: wait = yes
exec: program = "/usr/abills/libexec/rauth.pl post_auth"
exec: input_pairs = "request"
exec: output_pairs = "config"
exec: packet_type = "(null)"
Module: Instantiated exec (post_auth)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.200.4:32768, id=2,
length=144
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 4
NAS-Port-Type = Ethernet
User-Name = "lacho"
Calling-Station-Id = "00:15:AF:1F:23:1A"
Called-Station-Id = "pppoe-in"
NAS-Port-Id = "ether1"
CHAP-Challenge = 0x00000a2d5c17177c86733bd3ed908d0c
CHAP-Password = 0x0189c958b6e077d36f87977f590271a3dc
NAS-Identifier = "TEST-RADIUS"
NAS-IP-Address = 192.168.200.4
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
Exec-Program output: Auth-Type := Accept
Exec-Program-Wait: value-pairs: Auth-Type := Accept
Exec-Program: returned: 0
modcall[authorize]: module "pre_auth" returns ok for request 0
modcall[authorize]: module "mschap" returns noop for request 0
users: Matched entry DEFAULT at line 52
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type Accept rad_check_password:
Auth-Type = Accept, accepting the user Exec-Program output:
Acct-Interim-Interval = 300, Session-Timeout = 31, Mikrotik-Xmit-Limit
= 1073217536, Framed-IP-Address = 10.8.15.114, Mikrotik-Recv-Limit =
1073217536, Framed-IP-Netmask = 255.255.255.255, Exec-Program-Wait:
value-pairs: Acct-Interim-Interval = 300, Session-Timeout = 31,
Mikrotik-Xmit-Limit = 1073217536, Framed-IP-Address = 10.8.15.114,
Mikrotik-Recv-Limit = 1073217536, Framed-IP-Netmask = 255.255.255.255,
Exec-Program: returned: 0 Sending Access-Accept of id 2 to
192.168.200.4 port 32768 Acct-Interim-Interval = 300
Session-Timeout = 31 Mikrotik-Xmit-Limit = 1073217536
Framed-IP-Address = 10.8.15.114 Mikrotik-Recv-Limit =
1073217536 Framed-IP-Netmask = 255.255.255.255 Finished
request 0 Going to the next request --- Walking the entire request
list --- Waking up in 3 seconds... rad_recv: Access-Request packet
from host 192.168.200.4:32768, id=2, length=144 Sending duplicate
reply to client TEST-RADIUS:32768 - ID: 2 Re-sending Access-Accept of
id 2 to 192.168.200.4 port 32768 --- Walking the entire request list
--- Waking up in 2 seconds... rad_recv: Access-Request packet from
host 192.168.200.4:32768, id=2, length=144 Sending duplicate reply to
client TEST-RADIUS:32768 - ID: 2 Re-sending Access-Accept of id 2 to
192.168.200.4 port 32768 Waking up in 2 seconds... --- Walking the
entire request list --- Cleaning up request 0 ID 2 with timestamp
49c168d6 Nothing to do. Sleeping until we see a request.
That`s all 10x to advanced
--
Lazar Cherveniakov
Micro computers system - Lazkom
LIVE FREE OR DIE
Links:
------
[1] http://abills.net.ua/wiki/doku.php?id=abills:docs_03:install:en
-------------------------------------
Sportingbet – €1500 всеки ден, бонуси тенис залози на живо!
http://bg.sportingbet.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090318/ed29196a/attachment.html>
More information about the Freeradius-Users
mailing list