PEAP test fails using eapol_test

[tnt at kalik.net]

>I have spend more than a week, trying every hint i could extract from
>google. But I am still unable to get a working PEAP setup. Could someone
>please point out my glaringly obvious mistake.
>

The main mistake is that authentication - works:

Sending Access-Accept of id 9 to 130.225.51.87 port 49707
	MS-MPPE-Recv-Key =
0xabfe75a439bfffee14fbe7b08175c562a6ca31ee35da0da4b529c7e245aedbb0
	MS-MPPE-Send-Key =
0xb2b712c4df5ba5cdfbc893e6fdc6cbb710d3a52c5d868f8cfcbf7635184cb9aa
	EAP-Message = 0x03090004
	Message-Authenticator = 0x00000000000000000000000000000000
	User-Name = "anonymous"
Finished request 9.

and eapol:

CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
EAPOL: IEEE 802.1X for plaintext connection; no EAPOL-Key frames required
WPA: EAPOL processing complete
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_BE entering state IDLE

Reauthentication failed. Read cache section of eap.conf.

Ivan Kalik
Kalik Informatika ISP