Free radius 2.1.4 Installation

anoop c anoop.cherilthody at sifycorp.com
Mon May 11 10:08:34 CEST 2009 

Hi 
      Kindly find the error messages shown below.

n.c:361: `gstate' undeclared (first use in this function)
rlm_python.c:361: warning: implicit declaration of function
`PyGILState_Ensure'
rlm_python.c: In function `python_load_function':
rlm_python.c:470: `PyGILState_STATE' undeclared (first use in this function)
rlm_python.c:470: parse error before "gstate"
rlm_python.c:472: `gstate' undeclared (first use in this function)
rlm_python.c: In function `python_objclear':
rlm_python.c:508: `PyGILState_STATE' undeclared (first use in this function)
rlm_python.c:508: parse error before "__gstate"
rlm_python.c:510: `__gstate' undeclared (first use in this function)
gmake[6]: *** [rlm_python.lo] Error 1
gmake[6]: Leaving directory
`/home/freeradius-server-2.1.4/src/modules/rlm_python'
gmake[5]: *** [common] Error 2
gmake[5]: Leaving directory `/home/freeradius-server-2.1.4/src/modules'
gmake[4]: *** [all] Error 2
gmake[4]: Leaving directory `/home/freeradius-server-2.1.4/src/modules'
gmake[3]: *** [common] Error 2
gmake[3]: Leaving directory `/home/freeradius-server-2.1.4/src'
gmake[2]: *** [all] Error 2
gmake[2]: Leaving directory `/home/freeradius-server-2.1.4/src'
gmake[1]: *** [common] Error 2
gmake[1]: Leaving directory `/home/freeradius-server-2.1.4'
make: *** [all] Error 2
[root at Radius freeradius-server-2.1.4]#

Regards
Anoop

-----Original Message-----
From:
freeradius-users-bounces+anoop.cherilthody=sifycorp.com at lists.freeradius.org
[mailto:freeradius-users-bounces+anoop.cherilthody=sifycorp.com at lists.freera
dius.org] On Behalf Of freeradius-users-request at lists.freeradius.org
Sent: Monday, May 11, 2009 1:21 PM
To: freeradius-users at lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 49, Issue 27

Send Freeradius-Users mailing list submissions to
	freeradius-users at lists.freeradius.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
	freeradius-users-request at lists.freeradius.org

You can reach the person managing the list at
	freeradius-users-owner at lists.freeradius.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Freeradius-Users digest..."


Today's Topics:

   1. Re: checking authorization in the duration of connection
      (Nyamul Hassan)
   2. Re: Fair usage package implementation (Ming-Ching Tiew)
   3. Outer identity being used for LDAP group lookup in users file
      (Paul Dealy)
   4. Free  radius 2.1.4 Installation (anoop c)


----------------------------------------------------------------------

Message: 1
Date: Sun, 10 May 2009 22:38:01 +0600
From: "Nyamul Hassan" <mnhassan at usa.net>
Subject: Re: checking authorization in the duration of connection
To: "FreeRadius users mailing list"
	<freeradius-users at lists.freeradius.org>
Message-ID: <4FE512A198C84C929C304F31FCC1FB54 at carteslap>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

Phew... thanks for relieving me.  Mikrotik does have their problems, indeed.

With each new update, sometimes new bugs are added.  But, having used it for

some time now, and extensively, we've had to learn how to adapt our 
requirements to Mikrotik's abilities.

The biggest benefit that we find is, it uses Linux's powerful iptables and 
related TCP / IP software, and provides a very nice GUI, which is easy to 
teach to my techies for monitoring / basic config.

Regards
HASSAN



----- Original Message ----- 
From: "Ivan Kalik" <tnt at kalik.net>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Sent: Saturday, May 09, 2009 20:58
Subject: Re: checking authorization in the duration of connection


>> Sorry for barging into the thread, but something just caught my
>> attention. We use Mikrotik throughout our network, and have found them
>> quite useful and with the right hardware, it performs pretty well in
>> our setup.
>>
>> But, there are guys in this forum who are quite frankly, way ahead
>> than myself in terms of both knowledge and experience. So, could you
>> please elaborate why you rate Mikrotik as dumb? Perhaps I am already
>> in trouble!
>
> And plenty other people find it buggy and quirky. It has claims to support
> many things which then turns out to be half-baked. But with realistic
> demands - it's great value for money.
>
> Ivan Kalik
> Kalik Informatika ISP
>
> -
> List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html
> 



------------------------------

Message: 2
Date: Sun, 10 May 2009 17:51:13 -0700 (PDT)
From: Ming-Ching Tiew <mctiew at yahoo.com>
Subject: Re: Fair usage package implementation
To: FreeRadius users mailing list
	<freeradius-users at lists.freeradius.org>
Message-ID: <158542.11592.qm at web31506.mail.mud.yahoo.com>
Content-Type: text/plain; charset=us-ascii




--- On Sat, 5/9/09, Ming-Ching Tiew <mctiew at yahoo.com> wrote:

> 
>
--------------------begin---------------------------------------------------
----
> Sending Accounting-Response of id 5 to 192.168.130.220 port
> 3790
> WARNING: Unknown destination 192.168.130.220:3799 for CoA
> request.
> Do CoA Fail handler here
> Finished request 9.
>
--------------------end-----------------------------------------------------
--
> 
> For this particular NAS, I have set up the coaport to be
> 3790, as you can see in the radius reply the radius server
> is sending
> Accounting-Response to it.
> 
> Why there is a warning of 'Unknown destination
> 192.168.130.220.3799 for CoA
> request' ? Is it because the NAS is not setup properly to
> listen to
> port 3799 ? Where does the figure 3799 come from, a
> standard port number ?
> 

I have ruled out the possibility of NAS configuration
problem because if I exec a radclient from radiusd, it
works properly. It must be my idiot understanding of
configuration of CoA on radiusd, which seems to also
needing the setting of up "home-server" and so on
which at this moment I barely understand what they are.

Regards.





      


------------------------------

Message: 3
Date: Mon, 11 May 2009 12:45:46 +1000
From: Paul Dealy <pdealy at gmail.com>
Subject: Outer identity being used for LDAP group lookup in users file
To: freeradius-users at lists.freeradius.org
Message-ID:
	<9ded84ce0905101945pa697ff3y8531c3044cce679 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

In my "users" file I preform an Ldap-Group lookup and allocate vlan
based on this.  i.e. DEFAULT Ldap-Group !=
"cn=DisabledRadiusUsers,ou=roles,ou=services,o=abc"

The issue I am having is if a user has an Outer Identity set, the
Ldap-Group lookup is performed against this username not the Inner
Identity username.  Is there any way of ensuring that the lookup is
performed against the "real" inner identity not the "fake" outer
identity?

Cheers,
Paul


------------------------------

Message: 4
Date: Mon, 11 May 2009 13:20:50 +0530
From: "anoop c" <anoop.cherilthody at sifycorp.com>
Subject: Free  radius 2.1.4 Installation
To: <freeradius-users at lists.freeradius.org>
Message-ID: <200905110751.n4B7p904008274 at mxdrop231.xs4all.nl>
Content-Type: text/plain; charset="us-ascii"

 

Hi 

    I am getting the following errors while installing the FREERADIUS 2.1.4.
The following error coming after the execution of 'make' command. Kindly
look into this and suggest.

 

 

 

 

 



 

Regards

Anoop

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://lists.freeradius.org/pipermail/freeradius-users/attachments/2009051
1/fc8776a1/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 51284 bytes
Desc: not available
Url :
<https://lists.freeradius.org/pipermail/freeradius-users/attachments/2009051
1/fc8776a1/attachment.jpe>

------------------------------

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html


End of Freeradius-Users Digest, Vol 49, Issue 27
************************************************
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.238 / Virus Database: 270.12.21/2103 - Release Date: 05/10/09
07:02:00



Get your world in your inbox!

Mail, widgets, documents, spreadsheets, organizer and much more with your Sifymail WIYI id!
Log on to http://www.sify.com

********** DISCLAIMER **********
Information contained and transmitted by this E-MAIL is proprietary to 
Sify Limited and is intended for use only by the individual or entity to 
which it is addressed, and may contain information that is privileged, 
confidential or exempt from disclosure under applicable law. If this is a 
forwarded message, the content of this E-MAIL may not have been sent with 
the authority of the Company. If you are not the intended recipient, an 
agent of the intended recipient or a  person responsible for delivering the 
information to the named recipient,  you are notified that any use, 
distribution, transmission, printing, copying or dissemination of this 
information in any way or in any manner is strictly prohibited. If you have 
received this communication in error, please delete this mail & notify us 
immediately at admin at sifycorp.com

More information about the Freeradius-Users mailing list