question about windows users
Bartosz Chodzinski
bartosz.c at gmail.com
Mon May 18 16:01:27 CEST 2009
ok (you guys propably hate me :) but please could you still give me the
answers as you did before)
but back to the subject:
I did like you said,
I installed 2.0.4 version (compiled using suggestions from:
http://www.fatofthelan.com/articles/articles.php?pid=27
http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html)
Next, I make a one change in eap.conf
default_eap_type = peap #was md5
and I add my switch-client to clients.conf
#cd /etc/freeradius/certs
#rm -f *.pem *.der *.csr *.crt *.key *.p12 serial* index.txt*
I edited:
ca.cnf, client.cnf, server.cnf and I change line in everyone
default_bits = 1024 #was 2048
next:
#make ca ca.der dh random server client
Then I make the copy of ca.der and client.p12 to Windows, both of them are
installed in CA and Personal directory
And two things:
first one:
when I open properites of client certificate on XP using mmc-certificates
console I have the information that "Windows doesnt have enough information
to verify this certificate" "You have proper private key to this
certificate" (it is non-english system so its translation but I think
translation is ok)
second one:
FreeRADIUS Version 2.0.4, for host i486-pc-linux-gnu, built on May 18 2009
at 12:50:33
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including configuration file /etc/freeradius/snmp.conf
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including dictionary file /etc/freeradius/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/freeradius/freeradius.pid"
user = "freerad"
group = "freerad"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 192.168.5.0/24 {
require_message_authenticator = no
secret = "windows"
shortname = "private-network-2"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_check = "none"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = yes
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.pem"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/etc/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
}
}
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
main {
snmp = no
smux_password = ""
snmp_write_access = no
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.5.206 port 1812, id=138,
length=147
NAS-IP-Address = 192.168.5.206
NAS-Port = 50046
NAS-Port-Type = Ethernet
User-Name = "user at example.com"
Called-Station-Id = "00-0C-30-81-9B-EE"
Calling-Station-Id = "00-0A-E4-13-1A-02"
Service-Type = Framed-User
Framed-MTU = 1500
EAP-Message = 0x020000150175736572406578616d706c652e636f6d
Message-Authenticator = 0xc718b1d4b7b081aec676335c3b5212a5
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: Looking up realm "example.com" for User-Name = "
user at example.com"
rlm_realm: Found realm "example.com"
rlm_realm: Adding Stripped-User-Name = "user"
rlm_realm: Adding Realm = "example.com"
rlm_realm: Proxying request from user user to realm example.com
rlm_realm: Preparing to proxy authentication request to realm "
example.com"
++[suffix] returns updated
rlm_eap: Request is supposed to be proxied to Realm example.com. Not
doing EAP.
++[eap] returns noop
++[unix] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Sending Access-Request of id 188 to 127.0.0.1 port 1812
NAS-IP-Address = 192.168.5.206
NAS-Port = 50046
NAS-Port-Type = Ethernet
User-Name = "user"
Called-Station-Id = "00-0C-30-81-9B-EE"
Calling-Station-Id = "00-0A-E4-13-1A-02"
Service-Type = Framed-User
Framed-MTU = 1500
EAP-Message = 0x020000150175736572406578616d706c652e636f6d
Message-Authenticator = 0x00000000000000000000000000000000
Proxy-State = 0x313338
Proxying request 0 to home server 127.0.0.1 port 1812
Sending Access-Request of id 188 to 127.0.0.1 port 1812
NAS-IP-Address = 192.168.5.206
NAS-Port = 50046
NAS-Port-Type = Ethernet
User-Name = "user"
Called-Station-Id = "00-0C-30-81-9B-EE"
Calling-Station-Id = "00-0A-E4-13-1A-02"
Service-Type = Framed-User
Framed-MTU = 1500
EAP-Message = 0x020000150175736572406578616d706c652e636f6d
Message-Authenticator = 0x00000000000000000000000000000000
Proxy-State = 0x313338
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 1814, id=188,
length=140
NAS-IP-Address = 192.168.5.206
NAS-Port = 50046
NAS-Port-Type = Ethernet
User-Name = "user"
Called-Station-Id = "00-0C-30-81-9B-EE"
Calling-Station-Id = "00-0A-E4-13-1A-02"
Service-Type = Framed-User
Framed-MTU = 1500
EAP-Message = 0x020000150175736572406578616d706c652e636f6d
Message-Authenticator = 0xc54d60ff3ff696c5454632125d942c95
Proxy-State = 0x313338
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "user", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 0 length 21
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Identity does not match User-Name, setting from EAP Identity.
rlm_eap: Failed in handler
++[eap] returns invalid
auth: Failed to validate the user.
Login incorrect: [user/<via Auth-Type = EAP>] (from client localhost port
50046 cli 00-0A-E4-13-1A-02)
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> user
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 1
Sending Access-Reject of id 188 to 127.0.0.1 port 1814
Proxy-State = 0x313338
Waking up in 4.9 seconds.
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=188,
length=25
Proxy-State = 0x313338
+- entering group post-proxy
rlm_eap: No pre-existing handler found
++[eap] returns noop
Login incorrect (Home Server says so): [user at example.com/<no User-Password
attribute>] (from client private-network-2 port 50046 cli 00-0A-E4-13-1A-02)
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> user at example.com
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Sending Access-Reject of id 138 to 192.168.5.206 port 1812
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 1 ID 188 with timestamp +17
Cleaning up request 0 ID 138 with timestamp +17
Ready to process requests.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090518/ec3ec7e3/attachment.html>
More information about the Freeradius-Users
mailing list