Problems to do an SSID based authentication

[tnt at kalik.net]

>> > My users.conf file looks like this:
>>
>> > Peter    Cleartext-Password := "kaffe" , Called-Station-Id ==
>> "04-0B-6B-33-62-35:raket"
>> > Jens    Cleartext-Password := "kaffe" , Called-Station-Id ==
>> "02-0B-6B-33-62-35:3"

> The logs from my radius -X is following:
>
> rad_recv: Access-Request packet from host 192.168.118.10 port 42531,
> id=97, length=194
>     Service-Type = Framed-User
>     Framed-MTU = 1400
>     User-Name = "Jens"
>     Acct-Session-Id = "82200128"
>     Acct-Multi-Session-Id =
> "02-0B-6B-33-62-35-00-26-BB-14-50-CF-82-20-00-00-00-00-01-10"
>     Calling-Station-Id = "00-26-BB-14-50-CF"
>     Called-Station-Id = "02-0B-6B-33-62-35:3"
>     EAP-Message = 0x02020009014a656e73
>     Message-Authenticator = 0x12ec684d2cb511be9cf431ceeae1a5c8
>     NAS-Identifier = "MikroTik"
>     NAS-IP-Address = 192.168.118.10
> +- entering group authorize {...}
...
> Sending tunneled request
>     EAP-Message = 0x02080009014a656e73
>     FreeRADIUS-Proxied-To = 127.0.0.1
>     User-Name = "Jens"
> server inner-tunnel {
...

You haven't got ssid in inner-tunnel request. Enable
copy_request_to_tunnel in peap section of eap.conf.


Ivan Kalik
Kalik Informatika ISP