Re: isn´t registering FramedIpAdress (sometimes)!

[t_rider]

Finally, i got the debug register:

Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host XXX.XXX.236.1:59561, id=48, length=252
        Service-Type = Framed-User
        Framed-Protocol = PPP
        NAS-Port = 1557370
        NAS-Port-Type = Ethernet
        User-Name = "test at test.com"
        Calling-Station-Id = "00:10:10:AD:F7:7B"
        Called-Station-Id = "PPPoE-Camping"
        NAS-Port-Id = "EoIP->Camping"
        MS-CHAP-Domain = "test.com"
        Acct-Session-Id = "811025bf"
        Framed-IP-Address = 192.168.101.249
        Acct-Authentic = RADIUS
        Event-Timestamp = "Oct 29 2009 18:33:36 AMST"
        Acct-Session-Time = 95216
        Acct-Input-Octets = 34048624
        Acct-Input-Gigawords = 0
        Acct-Input-Packets = 165487
        Acct-Output-Octets = 190022963
        Acct-Output-Gigawords = 0
        Acct-Output-Packets = 214677
        Acct-Status-Type = Stop
	Acct-Terminate-Cause = User-Request
        NAS-Identifier = "lalala"
        NAS-IP-Address = XXX.XXX.236.1
        Acct-Delay-Time = 0
        Mikrotik-Realm = "test.com"
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 399
  modcall[preacct]: module "preprocess" returns noop for request 399
rlm_acct_unique: Hashing 'NAS-Port = 1557370,Client-IP-Address = XXX.XXX.236.1,NAS-IP-Address = XXX.XXX.236.1,Acct-Session-Id = "811025bf",User-Name = "test at test.com"'
rlm_acct_unique: Acct-Unique-Session-ID = "38a543632a983ade".
  modcall[preacct]: module "acct_unique" returns ok for request 399
    rlm_realm: Looking up realm "evo.net.br" for User-Name = "test at test.com"
    rlm_realm: No such realm "test.com"
  modcall[preacct]: module "suffix" returns noop for request 399
modcall: leaving group preacct (returns ok) for request 399
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 399
radius_xlat:  'test at test.com'
rlm_sql (sql): sql_set_user escaped user --> 'test at test.com'
radius_xlat:  '           UPDATE radacct SET              AcctStopTime       = '2009-10-29 18:33:36',              AcctSessionTime    = '95216',              AcctInputOctets    = '0' << 32 |                                   '34048624',              AcctOutputOctets   = '0' << 32 |                                   '190022963',              AcctTerminateCause = 'User-Request',              AcctStopDelay      = '0',              ConnectInfo_stop   = ''           WHERE AcctSessionId   = '811025bf'           AND UserName          = 'test at test.com'           AND NASIPAddress      = 'XXX.XXX.236.1''
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): Released sql socket id: 2
  modcall[accounting]: module "sql" returns ok for request 399
  modcall[accounting]: module "advertise" returns ok for request 399
modcall: leaving group accounting (returns ok) for request 399
Sending Accounting-Response of id 48 to XXX.XXX.236.1 port 59561
Finished request 399

Radacct:
|    453321 | 811025bf      | 7b21431a8e07e896 | test at test.com |       | XXX.XXX.236.1 | 1557829   | Ethernet    | 2009-06-30 15:54:46 | 2009-10-29 18:33:36 |           95216 | RADIUS        |                   |                  |        34048624 |        190022963 | PPPoE-Camping   | 00:10:10:AD:F7:7B | User-Request       | Framed-User | PPP            | 0.0.0.0         |              0 |             0 |                      |

 

Em 28/10/2009 09:31, t_rider < t_rider at bol.com.br > escreveu:


No, no problem with the pool. However, the pools are on Mikrotik, Radius just send a FramedPool.

Iḿ trying to get the error with Radius -X, but it's difficult. When i get this information i'll post here.

Thanks
 

Em 27/10/2009 22:58, Marinko Tarlac < mangia81 at gmail.com > escreveu:


Maybe your IP pool in NAS config. is to small to accept all connection 
attempts ...



t_rider wrote:
>
> Hello,
>
> It's my first time here and i'm trying to solve a big problem in my 
> Radius server.
>
> Sometimes, and it's happening without reason, The RadAcct put 0.0.0.0 
> in FramedIpAdress field.
>
> I don't know why it's happening, i have others Radius servers with the 
> same configuration, but this error occur just in this server.
>
> It's a 1.1.7 radius server. My clients are all Mikrotiks, with 3.13 
> version.
>
>  
>
> Can anyone help me??
>
> Thanks,
>
> Alexandre
>
> ------------------------------------------------------------------------
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html