Assign VLAN

[Rangel, Luciano]

Freeradius Access-Accept:

Sending Access-Accept of id 29 to 10.0.0.3 port 1645
        MS-MPPE-Recv-Key = 0x88a007eda1d4841ea348c3a0d49fd963e3f188a3f77509c3d3eb045d3a23fa7c
        MS-MPPE-Send-Key = 0xbe8168ed341e6a4f0332a9d0c8b1893f574e98fa4af7af74dbebf944f687eaf7
        EAP-Message = 0x030c0004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "GROUPINFRA\\rangell"
Finished request 10.

I don´t see attributes (VLAN, IEEE-802 and 200) in freerdius access-accept, but in a stretch of logs I see messages below:

Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[eap] Freeing handler
++[eap] returns ok
Login OK: [GROUPINFRA\\rangell] (from client switch-2960 port 0 via TLS tunnel)
  WARNING: Empty section.  Using default return values.
} # server inner-tunnel
[peap] Got tunneled reply code 2
        Service-Type = Framed-User
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "200"
        EAP-Message = 0x030b0004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "GROUPINFRA\\rangell"
[peap] Got tunneled reply RADIUS code 2
        Service-Type = Framed-User
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "200"
        EAP-Message = 0x030b0004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "GROUPINFRA\\rangell"
[peap] Tunneled authentication was successful.
[peap] SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 28 to 10.0.0.3 port 1645
        EAP-Message = 0x010c00261900170301001b0472c7380855a9fa41e49897807ecfeecbf7e6868eb3fe9540e8a3
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xd32e175dda220e5c8cbe3424bc53aa13
Finished request 9.

Regards,

Luciano Rangel

Think green - keep it on the screen.

This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.