Alvarion BS Service Provision

[Ben Wiechman]

I believe you can only use the actual vid and not a vlan name (i.e.
VLAN_200) in the vlan and access lists. At least under the older TDD builds
this is the case, so I presume the same limitations apply to the 16e
services.

Ben

On Tue, Dec 14, 2010 at 6:59 AM, Wilson, Stuart <swilso19 at harris.com> wrote:

>  I cannot get our Alvarion BS to assign service profiles to a MS. I have
> read the forums and tried to use that information to help, but I cannot get
> a service profile to be assigned. Our setup is as follows:
>
> FreeRADIUS AAA with MySQL database.
>
> The radgroupreply is:
>
> 8 | MLB_MS    | Filter-ID         | =  |
> "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON"
>
> The radusergroup is:
>
>
>
> MLB_LAB_MS2 at WiMax.com        | MLB_MS    |        1 |
>
> a sample from radiusd -x
>
> Access-Request:
>
>  Access-Request packet from host 192.168.254.253 port 49154, id=109,
> length=258
>
>         User-Name = "{am=1}6ced97d91a6fcef3419e70f9c7ff34c1 at WiMax.com"
>
>         NAS-IP-Address = 192.168.254.253
>
>         NAS-Port-Type = 27
>
>         NAS-Port = 3
>
>         Calling-Station-Id = "\000\020\347A\\d"
>
>         NAS-Identifier = "002002002000065002"
>
>         WiMAX-GMT-Timezone-offset = 18000
>
>         Framed-MTU = 1490
>
>         Service-Type = Framed-User
>
>         WiMAX-Release = "1.0"
>
>         WiMAX-Accounting-Capabilities = IP-Session-Based
>
>         WiMAX-BS-Id = 0x303032303032303032303030303635303032
>
>         EAP-Message =
> 0x02010035017b616d3d317d36636564393764393161366663656633343139653730663963376666333463314057694d61782e636f6d
>
>
>         Message-Authenticator = 0x4277326335201e6d8fa3f8a26a9311d7
>
> Access-Accept:
>
> Sending Access-Accept of id 108 to 192.168.254.253 port 49154
>
>         Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=OFF"
>
>         WiMAX-FA-RK-Key = 0x00
>
>         WiMAX-MSK = 0x
>
> TTLS Reply:
>
> [ttls] Got tunneled reply code 2
>
>         Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON"
>
>         MS-CHAP2-Success =
> 0x98533d41334643344439373546424136454339433135323941323643313844373437434542313443453330
>
>
>         MS-MPPE-Recv-Key = 0x095bfcafbd7e6970eb5762a77b159f59
>
>         MS-MPPE-Send-Key = 0x4d060be03b8d2c8939627ade2f95c539
>
>         MS-MPPE-Encryption-Policy = 0x00000001
>
>         MS-MPPE-Encryption-Types = 0x00000006
>
> The most helpful information would be a guide on how to configure
> FreeRADIUS and the associated MySQL server to apply a service profile to a
> MS.
>
> Thanks for the help.
>
> Stuart Wilson
>
> Email: ***swilso19 at harris.com* <swilso19 at harris.com>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20101220/76ae1fe8/attachment.html>