My Static IP Client conf. not work

[Adrian Boros]

Hello Tevfik,

Run radius in debug mode (radius -X) and then try to authenticate the user.  You should have enough information in the debug to
figure out the problem. 

If you still can't figure it out paste your debug output here.  You may also want to mention what version of freeradius you're
using.

Adrian

-----Original Message-----
From: freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org
[mailto:freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org] On Behalf Of Tevfik Ceydeliler
Sent: Tuesday, January 12, 2010 2:15 AM
To: freeradius-users at lists.freeradius.org
Subject: My Static IP Client conf. not work 


Hi Adrian,
I change the operator for Framed IP Address and Netmask.
But nothing changed.
Client  get Access-Accept but no IP address assigned. I check it with "ipconfig" 
Regards...


 Tevfik Ceydeliler
  



-----Original Message-----
From: freeradius-users-bounces+tevfik.ceydeliler=astron.yasar.com.tr at lists.freeradius.org
[mailto:freeradius-users-bounces+tevfik.ceydeliler=astron.yasar.com.tr at lists.freeradius.org] On Behalf Of
freeradius-users-request at lists.freeradius.org
Sent: Monday, January 11, 2010 6:59 PM
To: freeradius-users at lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 57, Issue 31

Send Freeradius-Users mailing list submissions to
	freeradius-users at lists.freeradius.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
	freeradius-users-request at lists.freeradius.org

You can reach the person managing the list at
	freeradius-users-owner at lists.freeradius.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Freeradius-Users digest..."


Today's Topics:

   1. RE: My Static IP Client conf. not work (Adrian Boros)
   2. Re: rlm_sqlippool required? (John Dennis)
   3. NT/LM password from LDAP (PAP works, MSCHAP doesn't).
      (Lech Karol Paw?aszek)


----------------------------------------------------------------------

Message: 1
Date: Mon, 11 Jan 2010 09:38:18 -0500
From: "Adrian Boros" <adrian at dsl4u.ca>
Subject: RE: My Static IP Client conf. not work
To: "'FreeRadius users mailing list'"
	<freeradius-users at lists.freeradius.org>
Message-ID: <0fc901ca92cb$b789fad0$269df070$@ca>
Content-Type: text/plain;	charset="us-ascii"

Hello Tevfik,

Try changing the operator from == to := when assigning the Framed IP and Framed Netmask.  I would also recommend it for others but
you're better off reading the following link which should give you an understanding of the operators in use:

http://wiki.freeradius.org/Operators

Best regards,
Adrian Boros

-----Original Message-----
From: freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org
[mailto:freeradius-users-bounces+adrian=dsl4u.ca at lists.freeradius.org] On Behalf Of Tevfik Ceydeliler
Sent: Monday, January 11, 2010 4:55 AM
To: freeradius-users at lists.freeradius.org
Subject: My Static IP Client conf. not work


Hi,
I have a client, when I put this client into an IP pool everything is
ok. But when I move him for framed-Ip (static IP),he can't get that IP
address.
Note: I use a secovid as realm and NAS is Telecom Operator (For APN)
I dont know what i should check. Can you help me to start?
#################################################################
Here is the user configuration:
FOR POOL -->
tevfikceydeliler       Service-Type ==
Framed-User,Packet-Type==Access-Request, Proxy-To-Realm := 10.1.1.51,
Pool-Name := BirmasGPRS

For Static IP -->
tevfikceydeliler        Packet-Type==Access-Request, 
				Proxy-To-Realm := 10.1.1.51, 
				Framed-IP-Address == 172.30.65.90, 
				Framed-IP-Netmask == 255.255.255, 
				Framed-MTU = 1500, 
				Framed-Routing = None, 
				Framed-Protocol = PPP, 
				Service-Type = Framed, 
				Fall-Through = Yes

AND DEFAULTS -->
DEFAULT Framed-Protocol == PPP
        Framed-Protocol = PPP,
        Framed-Compression = Van-Jacobson-TCP-IP

DEFAULT Hint == "CSLIP"
        Framed-Protocol = SLIP,
        Framed-Compression = Van-Jacobson-TCP-IP

DEFAULT Hint == "SLIP"                            
        Framed-Protocol = SLIP

DEFAULT Auth-Type := Accept

###################################################

Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup, Yasar Toplulugu
Sirketleri bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi dusunulen kisi veya
kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.The information contained in this
e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and
Yasar Group Companies do not accept legal responsibility for the contents. If you are not the intended recipient, please immediately
notify the sender and delete it from your system.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html