LDAP search problem
Wayne Van der Merwe
vdmerww at gmail.com
Fri Jul 23 10:41:43 CEST 2010
I have FreeRADIUS 2.1.1 setup on SUS server 10.1
We are wanting to do a LDAP connection to Novell edirectory server for our
users.
>From the debug out put the LDAP session binded corectly
The searched part failed.
I would like to know did the radius server send out the loging name as
uid=53986067? as indicated below.
rlm_ldap: performing search in ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC,
with filter (uid=53986067)
When i do a ldapsearch -h 10.219.176.30 -b
ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC -x "uid=53986067"
I get no results.
If i use -x "cn=53986067" the user is found.
I used radtest to do the testing
Debug File
---------------------------------------
FreeRADIUS Version 2.1.1, for host i686-suse-linux-gnu, built on Nov 19 2008
at 16:17:41
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/sql.conf
including configuration file /etc/raddb/sql/mysql/dialup.conf
including configuration file /etc/raddb/sql/mysql/counter.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = yes
auth = yes
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}autharise a user.
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
shortname = "localhost"
nastype = "other"
}
client 10.219.139.253/24 {
require_message_authenticator = no
secret = "freeradius"
shortname = "DoHICTFrere"
nastype = "other"
}
client 10.219.220.2/23 {
require_message_authenticator = no
secret = "qwerty123456"
shortname = "DoHICTFrere"
nastype = "other"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "Jup1ter"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_ldap
Module: Instantiating ldap
ldap {
server = "10.219.176.30"
port = 389
password = "xxxxxx"
identity = "cn=uniLDAPuser,ou=ADMIN,o=EC"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC"
filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
edir_account_policy_check = no
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in
the "authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
conns: 0x817d2a0
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 32772, id=194,
length=60
User-Name = "53986067"
User-Password = "xxxxxx"
NAS-IP-Address = 10.219.139.100
NAS-Port = 0
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "53986067", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
++[files] returns noop
[ldap] performing user authorization for 53986067
[ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for
details
[ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) ->
(uid=53986067)
[ldap] expand: ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC ->
ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 10.219.176.30:389, authentication 0
rlm_ldap: bind as cn=uniLDAPuser,ou=ADMIN,o=EC/xxxxxx to 10.219.176.30:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC,
with filter (uid=53986067)
rlm_ldap: object not found or got ambiguous search result
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns notfound
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
No authenticate method (Auth-Type) configuration found for the request:
Rejecting the user
Failed to authenticate the user.
Login incorrect (rlm_ldap: User not found): [53986067] (from client
localhost port 0)
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> 53986067
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.2 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 194 to 127.0.0.1 port 32772
Waking up in 4.9 seconds.
LDAP file
-----------------------------------
# -*- text -*-
#
# $Id$
# Lightweight Directory Access Protocol (LDAP)
#
# This module definition allows you to use LDAP for
# authorization and authentication.
#
# See raddb/sites-available/default for reference to the
# ldap module in the authorize and authenticate sections.
#
# However, LDAP can be used for authentication ONLY when the
# Access-Request packet contains a clear-text User-Password
# attribute. LDAP authentication will NOT work for any other
# authentication method.
#
# This means that LDAP servers don't understand EAP. If you
# force "Auth-Type = LDAP", and then send the server a
# request containing EAP authentication, then authentication
# WILL NOT WORK.
#
# The solution is to use the default configuration, which does
# work.
#
# Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We
# really can't emphasize this enough.
#
ldap {
#
# Note that this needs to match the name in the LDAP
# server certificate, if you're using ldaps.
server = "10.219.176.30"
identity = "cn=uniLDAPuser,ou=ADMIN,o=EC"
password = "xxxxxx"
basedn = "ou=USERS,ou=ELS-FRERE,ou=AMATOLA,ou=HLT,o=EC"
filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
#base_filter = "(objectclass=radiusprofile)"
# How many connections to keep open to the LDAP server.
# This saves time over opening a new LDAP socket for
# every authentication request.
ldap_connections_number = 5
# seconds to wait for LDAP query to finish. default: 20
timeout = 4
# seconds LDAP server has to process the query (server-side
# time limit). default: 20
#
# LDAP_OPT_TIMELIMIT is set to this value.
timelimit = 3
#
# seconds to wait for response of the server. (network
# failures) default: 10
#
# LDAP_OPT_NETWORK_TIMEOUT is set to this value.
net_timeout = 1
#
# This subsection configures the tls related items
# that control how FreeRADIUS connects to an LDAP
# server. It contains all of the "tls_*" configuration
# entries used in older versions of FreeRADIUS. Those
# configuration entries can still be used, but we recommend
# using these.
#
tls {
# Set this to 'yes' to use TLS encrypted connections
# to the LDAP database by using the StartTLS extended
# operation.
#
# The StartTLS operation is supposed to be
# used with normal ldap connections instead of
# using ldaps (port 689) connections
start_tls = no
# cacertfile = /path/to/cacert.pem
# cacertdir = /path/to/ca/dir/
# certfile = /path/to/radius.crt
# keyfile = /path/to/radius.key
# randfile = /path/to/rnd
# Certificate Verification requirements. Can be:
# "never" (don't even bother trying)
# "allow" (try, but don't fail if the cerificate
# can't be verified)
# "demand" (fail if the certificate doesn't verify.)
#
# The default is "allow"
# require_cert = "demand"
}
# default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA"
# profile_attribute = "radiusProfileDn"
# access_attr = "dialupAccess"
# Mapping of RADIUS dictionary attributes to LDAP
# directory attributes.
dictionary_mapping = ${confdir}/ldap.attrmap
# Set password_attribute = nspmPassword to get the
# user's password from a Novell eDirectory
# backend. This will work ONLY IF FreeRADIUS has been
# built with the --with-edir configure option.
#
# See also the following links:
#
# http://www.novell.com/coolsolutions/appnote/16745.html
#
https://secure-support.novell.com/KanisaPlatform/Publishing/558/3009668_f.SAL_Public.html
#
# Novell may require TLS encrypted sessions before returning
# the user's password.
#
# password_attribute = userPassword
# Un-comment the following to disable Novell
# eDirectory account policy check and intruder
# detection. This will work *only if* FreeRADIUS is
# configured to build with --with-edir option.
#
edir_account_policy_check = no
#
# Group membership checking. Disabled by default.
#
groupname_attribute = cn
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
groupmembership_attribute = radiusGroupName
# compare_check_items = yes
# do_xlat = yes
# access_attr_used_for_allow = yes
#
# By default, if the packet contains a User-Password,
# and no other module is configured to handle the
# authentication, the LDAP module sets itself to do
# LDAP bind for authentication.
#
# THIS WILL ONLY WORK FOR PAP AUTHENTICATION.
#
# THIS WILL NOT WORK FOR CHAP, MS-CHAP, or 802.1x (EAP).
#
# You can disable this behavior by setting the following
# configuration entry to "no".
#
# allowed values: {no, yes}
# set_auth_type = yes
# ldap_debug: debug flag for LDAP SDK
# (see OpenLDAP documentation). Set this to enable
# huge amounts of LDAP debugging on the screen.
# You should only use this if you are an LDAP expert.
#
# default: 0x0000 (no debugging messages)
# Example:(LDAP_DEBUG_FILTER+LDAP_DEBUG_CONNS)
#ldap_debug = 0x0028
}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100723/cae21867/attachment.html>
More information about the Freeradius-Users
mailing list