No User-Password or CHAP-Password attribute in the request

[omega bk]

>
> hello all,
>
> My version of freeradius is Version 2.1.0
>
> here is my result in debug mode:
>
> rad_recv: Access-Request packet from host 192.168.20.253 port 1645, id=112,
> length=131
>     User-Name = "linatest"
>     Service-Type = Framed-User
>     Framed-MTU = 1500
>     Called-Station-Id = "00-1A-A1-64-BB-1A"
>     Calling-Station-Id = "00-18-8B-B5-26-B7"
>     EAP-Message = 0x0202000d016c696e6174657374
>     Message-Authenticator = 0x3fe6e297218c3aa1e98286a5a3db3303
>     NAS-Port = 50024
>     NAS-Port-Type = Ethernet
>     NAS-IP-Address = 192.168.20.253
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[chap] returns noop
> [files] users: Matched entry linatest at line 11
> ++[files] returns ok
> WARNING: Please update your configuration, and remove 'Auth-Type = Local'
> WARNING: Use the PAP or CHAP modules instead.
> No User-Password or CHAP-Password attribute in the request.
> Cannot perform authentication.
> Failed to authenticate the user.
> Delaying reject of request 0 for 1 seconds
> Going to the next request
> Waking up in 0.9 seconds.
> Sending delayed reject for request 0
> Sending Access-Reject of id 112 to 192.168.20.253 port 1645
>     Service-Type = Framed-User
> Waking up in 4.9 seconds.
> Cleaning up request 0 ID 112 with timestamp +20
>
>
> i don't have 'Auth-Type = Local' but it still remaining me this
> And :
> No User-Password or CHAP-Password attribute in the request.
> Cannot perform authentication.
> Failed to authenticate the user.
>
> where to put this CHAP-Password attribute in the request??
>
> here is my users file
>
> linatest        Cleartext-Password := "mypass"
>                 Service-Type = Framed-User
>
>
>
> thanks for your help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100303/d1fa4582/attachment.html>