Lost and confused
jin jin
jyajin at yahoo.com.sg
Fri Mar 5 01:44:05 CET 2010
--- On Thu, 4/3/10, freeradius-users-request at lists.freeradius.org <freeradius-users-request at lists.freeradius.org> wrote:
From: freeradius-users-request at lists.freeradius.org <freeradius-users-request at lists.freeradius.org>
Subject: Freeradius-Users Digest, Vol 59, Issue 15
To: freeradius-users at lists.freeradius.org
Date: Thursday, 4 March, 2010, 7:00 PM
Send Freeradius-Users mailing list submissions to
freeradius-users at lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
freeradius-users-request at lists.freeradius.org
You can reach the person managing the list at
freeradius-users-owner at lists.freeradius.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Lost and confused (jin jin)
2. Re: Can a wpa_supplicant talk to a Free Radius server without
a NAS in between? (Alan DeKok)
3. Re: freeradius 1.1.8 hangs in rlm_perl on 64bit (Alan DeKok)
4. Re: vlan and freeradius (Alan DeKok)
5. Re: Lost and confused (Alan DeKok)
6. Re: special query for authentication (Bob Brandt)
7. Threads & Perl (Alexandr Kovalenko)
----------------------------------------------------------------------
Message: 1
Date: Thu, 4 Mar 2010 14:39:46 +0800 (SGT)
From: jin jin <jyajin at yahoo.com.sg>
Subject: Lost and confused
To: freeradius-users at lists.freeradius.org
Message-ID: <535148.16355.qm at web76001.mail.sg1.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"
This is the first time that I'm trying to set up a freeRADIUS server (Ver 2.1.0) using Ubuntu 9.10 and I'm running into walls. I used the debug mode and this is the output
Failed binding to socket: Address already in use
/etc/freeradius/radiusd.conf[236]: Error binding to port for 0.0.0.0 port 1812
I googled but the closest match was a bug which was fixed earlier on. I'm not really sure what the above meant either. Do I have to connect my freeRADIUS server to my ADSL router first before I run freeRADIUS in debug mode?
I am sorry if I have asked a few dumb questions, thanks in advance to the people replying to me.
Best regards,
??????????????????? Jin
New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/sg/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freeradius.org/pipermail/freeradius-users/attachments/20100304/0098ce62/attachment.html>
------------------------------
Message: 2
Date: Thu, 04 Mar 2010 07:50:47 +0100
From: Alan DeKok <aland at deployingradius.com>
Subject: Re: Can a wpa_supplicant talk to a Free Radius server without
a NAS in between?
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID: <4B8F5847.1000404 at deployingradius.com>
Content-Type: text/plain; charset=ISO-8859-1
R C wrote:
> and even if i run 5-6 eapol_test processes at the same time, there will
> be only 5-6 parallel sessions at any given time.
So... run more processes on more machines.
> 2. Since there are no free wpa supplicants that can generate multiple
> separate sessions at the same time, do you know of any paid tools
> (non-open source) that might generate about a 100,000 client requests?
No. Generating 100K TLS requests will likely take dozens of CPUs, each
running at maximum capacity, just to do all of the crypto overhead.
So... run more processes on more machines.
> I am just asking this question hoping some one would have had a similar
> requirement.
No. Because the requirement is rather extreme, a more than a little
pointless.
i.e. Q: What happens when I send my web server 100K HTTPS connections?
A: it dies.
Q: How do I generate 100K HTTPS connections from clients?
A: post a link on slashot.
Alan DeKok.
------------------------------
Message: 3
Date: Thu, 04 Mar 2010 07:57:30 +0100
From: Alan DeKok <aland at deployingradius.com>
Subject: Re: freeradius 1.1.8 hangs in rlm_perl on 64bit
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID: <4B8F59DA.8080900 at deployingradius.com>
Content-Type: text/plain; charset=ISO-8859-1
Olivier Bilodeau wrote:
> Any ideas on what it could be? perl? freeradius? 64bit? our perl code?
<shrug> That code is about 3 years old at this point, and no longer
actively maintained.
> We haven't switched to 2.x because of day to day activity overload but
> that could be a good reason for us to do the learning necessary to switch.
It takes an hour or so to compile && test 2.1.8. You don't need to
switch it to production until you've verified that it works.
Alan DeKok.
------------------------------
Message: 4
Date: Thu, 04 Mar 2010 07:57:51 +0100
From: Alan DeKok <aland at deployingradius.com>
Subject: Re: vlan and freeradius
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID: <4B8F59EF.9090108 at deployingradius.com>
Content-Type: text/plain; charset=ISO-8859-1
Jens Link wrote:
> @Alan: I would document VMPS in some more detail in the wiki if my
> access would be working. ;-)
It seems to be fine now.
Alan DeKok.
------------------------------
Message: 5
Date: Thu, 04 Mar 2010 07:58:50 +0100
From: Alan DeKok <aland at deployingradius.com>
Subject: Re: Lost and confused
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID: <4B8F5A2A.5010902 at deployingradius.com>
Content-Type: text/plain; charset=ISO-8859-1
jin jin wrote:
> This is the first time that I'm trying to set up a freeRADIUS server
> (Ver 2.1.0) using Ubuntu 9.10 and I'm running into walls. I used the
> debug mode and this is the output
>
> Failed binding to socket: Address already in use
> /etc/freeradius/radiusd.conf[236]: Error binding to port for 0.0.0.0
> port 1812
Stop the server before you run it in debugging mode:
$ /etc/init.d/freeradius stop
Alan DeKok.
------------------------------
Message: 6
Date: Thu, 4 Mar 2010 09:17:10 +0000
From: Bob Brandt <bob at brandt.ie>
Subject: Re: special query for authentication
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID:
<a17348011003040117k1012c4e3n3d3a2fa2cb40d894 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Someone else might have to help out here, but I remember seeing
something about using the huntgroups file, say:
Free NAS-IP-Address == 192.168.1.1
Pay NAS-IP-Address == 192.168.1.2
And then maybe in the users file use:
DEFAULT Huntgroup-Name == Free
Service-Type = "Login-User",
SomeOtherAttribute = "Free"
DEFAULT Huntgroup-Name == Pay
Service-Type = "Login-User",
SomeOtherAttribute ="Pay"
Maybe ??
Good Luck
Bob
------------------------------
Message: 7
Date: Thu, 4 Mar 2010 11:57:08 +0200
From: Alexandr Kovalenko <alexandr.kovalenko at gmail.com>
Subject: Threads & Perl
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID:
<1d2641261003040157o27ab567cod6083b986ac972cb at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hello!
I'm trying to find out if FreeRADIUS create separate Perl instance per
each thread (thread pool {}) (2.1.8) ?
The main question is: will FreeRADIUS with use of rlm_perl script be
able to serve multiple requests simultaneously or each next request
should wait until previous will finish?
--
Alexandr Kovalenko
http://uafug.org.ua/
------------------------------
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
End of Freeradius-Users Digest, Vol 59, Issue 15
************************************************
I tried to stop the server but I don't think it's working. Should I switch over to using other OS like OpenSuse or Debian instead? Sorry for the all the trouble.
* Stopping FreeRADIUS daemon freeradius
start-stop-daemon: warning: failed to kill 6339: No such process
[ OK ]
Here is the full output from using the debug command
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including dictionary file /etc/freeradius/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Ignoring EAP-Type/tls because we do not have OpenSSL support.
Ignoring EAP-Type/ttls because we do not have OpenSSL support.
Ignoring EAP-Type/peap because we do not have OpenSSL support.
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
Failed binding to socket: Address already in use
/etc/freeradius/radiusd.conf[236]: Error binding to port for 0.0.0.0 port 1812
lauwk at lauwk-desktop:~$
Best regards,
Jin
New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/sg/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100305/cbe9da8c/attachment.html>
More information about the Freeradius-Users
mailing list