Doubt - Freeradius + Ldap
eduardo moreira
eduardomoreirars at gmail.com
Thu Nov 4 12:51:15 CET 2010
SOrry about this mail Josip, but i checked again my clients.conf, and i put
conf here for u see.
clients.conf
client 127.0.0.1 {
secret = password
shortname = localhost
nastype = other # localhost isn't usually a NAS...
}
client 10.12.60.19 {
secret = password
shortname = any
nastype = other
}
and i use this command to test connection:
radtest username 123456 10.12.60.19 1812 0 password
And i see log of debug and receive this message:
Mon Nov 1 15:06:16 2010 : Debug: Ready to process requests.
rad_recv: Access-Request packet from host 10.12.60.19 port 50105, id=100,
length=73
User-Name = "username"
User-Password = "c\355W'\021tC\372\177R\232(\007\027n\263"
NAS-IP-Address = 127.0.1.1
NAS-Port = 1812
Framed-Protocol = PPP
Thu Nov 4 09:30:02 2010 : Debug: +- entering group authorize
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: calling preprocess
(rlm_preprocess) for request 1
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: returned from
preprocess (rlm_preprocess) for request 1
Thu Nov 4 09:30:02 2010 : Debug: ++[preprocess] returns ok
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: calling mschap
(rlm_mschap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: returned from
mschap (rlm_mschap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: ++[mschap] returns noop
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: calling ldap
(rlm_ldap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: - authorize
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: performing user authorization
for username
Thu Nov 4 09:30:02 2010 : Debug: expand: (uid=%u) -> (uid=username)
Thu Nov 4 09:30:02 2010 : Debug: expand: dc=a,dc=a,dc=c,dc=b ->
dc=a,dc=a,dc=c,dc=b
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: ldap_get_conn: Checking Id: 0
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: ldap_get_conn: Got Id: 0
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: performing search in
dc=a,dc=a,dc=c,dc=b,dc=a,dc=a,dc=c,dc=b, with filter (uid=username)
Thu Nov 4 09:30:02 2010 : Error: rlm_ldap: ldap_search() failed: LDAP
connection lost.
Thu Nov 4 09:30:02 2010 : Info: rlm_ldap: Attempting reconnect
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: attempting LDAP reconnection
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: closing existing LDAP connection
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: (re)connect to ldap.intra
proxy.intra localhost:389, authentication 0
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: bind as
cn=Administrator,dc=a,dc=c,dc=a,dc=c,dc=b/password to ldap.intra proxy.intra
localhost:389
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: waiting for bind result ...
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: Bind was successful
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: performing search in
dc=a,dc=c,dc=a,dc=a,dc=c,dc=a,dc=c, with filter (uid=username)
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: Added User-Password =
{crypt}tg/iHj5yM2iXI in check items
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: No default NMAS login sequence
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: looking for check items in
directory...
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: LDAP attribute userPassword as
RADIUS attribute Password-With-Header == "{crypt}tg/iHj5yM2iXI"
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: LDAP attribute sambantPassword
as RADIUS attribute NT-Password ==
0x3738463934413643303931413730423936454135373046344341353438304531
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: LDAP attribute sambalmPassword
as RADIUS attribute LM-Password ==
0x3743414142444638393134314430423841414433423433354235313430344545
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: LDAP attribute cn as RADIUS
attribute Group == "username"
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: looking for reply items in
directory...
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: user username authorized to use
remote access
Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: ldap_release_conn: Release Id: 0
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: returned from ldap
(rlm_ldap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: ++[ldap] returns ok
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: calling eap
(rlm_eap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: rlm_eap: No EAP-Message, not doing EAP
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: returned from eap
(rlm_eap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: ++[eap] returns noop
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: calling chap
(rlm_chap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: modsingle[authorize]: returned from chap
(rlm_chap) for request 1
Thu Nov 4 09:30:02 2010 : Debug: ++[chap] returns noop
Thu Nov 4 09:30:02 2010 : Debug:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 4 09:30:02 2010 : Debug: !!! Replacing User-Password in config
items with Cleartext-Password. !!!
Thu Nov 4 09:30:02 2010 : Debug:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 4 09:30:02 2010 : Debug: !!! Please update your configuration so
that the "known good" !!!
Thu Nov 4 09:30:02 2010 : Debug: !!! clear text password is in
Cleartext-Password, and not in User-Password. !!!
Thu Nov 4 09:30:02 2010 : Debug:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 4 09:30:02 2010 : Debug: auth: type Local
Thu Nov 4 09:30:02 2010 : Debug: auth: user supplied User-Password does NOT
match local User-Password
Thu Nov 4 09:30:02 2010 : Debug: auth: Failed to validate the user.
Thu Nov 4 09:30:02 2010 : Auth: Login incorrect:
[username/c\355W'\021tC\372\177R\232(\007\027n\263] (from client any port
1812)
Thu Nov 4 09:30:02 2010 : Debug: WARNING: Unprintable characters in the
password. Double-check the shared secret on the server and the NAS!
Thu Nov 4 09:30:02 2010 : Debug: Delaying reject of request 1 for 1 seconds
Thu Nov 4 09:30:02 2010 : Debug: Going to the next request
Thu Nov 4 09:30:02 2010 : Debug: Waking up in 0.9 seconds.
Thu Nov 4 09:30:03 2010 : Debug: Sending delayed reject for request 1
Sending Access-Reject of id 100 to 10.12.60.19 port 50105
Thu Nov 4 09:30:03 2010 : Debug: Waking up in 4.9 seconds.
Thu Nov 4 09:30:08 2010 : Debug: Cleaning up request 1 ID 100 with
timestamp +239035
Thu Nov 4 09:30:08 2010 : Debug: Ready to process requests.
if u see here: Thu Nov 4 09:30:02 2010 : Debug: rlm_ldap: user username
authorized to use remote access
my username is authorized to use, but in last line appears failed to
validade the user ...
Thu Nov 4 09:30:02 2010 : Debug:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 4 09:30:02 2010 : Debug: !!! Replacing User-Password in config
items with Cleartext-Password. !!!
Thu Nov 4 09:30:02 2010 : Debug:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 4 09:30:02 2010 : Debug: !!! Please update your configuration so
that the "known good" !!!
Thu Nov 4 09:30:02 2010 : Debug: !!! clear text password is in
Cleartext-Password, and not in User-Password. !!!
Thu Nov 4 09:30:02 2010 : Debug:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 4 09:30:02 2010 : Debug: auth: type Local
Thu Nov 4 09:30:02 2010 : Debug: auth: user supplied User-Password does NOT
match local User-Password
Thu Nov 4 09:30:02 2010 : Debug: auth: Failed to validate the user.
Thu Nov 4 09:30:02 2010 : Auth: Login incorrect:
[username/c\355W'\021tC\372\177R\232(\007\027n\263] (from client any port
1812)
Thu Nov 4 09:30:02 2010 : Debug: WARNING: Unprintable characters in the
password. Double-check the shared secret on the server and the NAS!
sorry josip, i chek again my clients.conf but i still dont uderstand.
thanks again for u help.
2010/11/1 Josip Rodin <joy at entuzijast.net>
> On Tue, Nov 02, 2010 at 07:30:23AM +1300, Peter Lambrechtsen wrote:
> > It's probably since you didn't compile OpenLDAP and FreeRadius with
> OpenSSL
> > support.
> >
> > So you will need to recompile OpenLDAP, Cyrus SASL, OpenLDAP and
> FreeRadius.
>
> No, no, no, and no. <sigh>
>
> If you want to read random debug messages, don't pick just any.
>
> Yes, he doesn't have SSL support, but the log also says pretty clearly:
>
> > > Mon Nov 1 15:06:10 2010 : Debug: rlm_eap: No EAP-Message, not doing
> EAP
>
> When the client does not use EAP, it's completely irrelevant that the
> server
> doesn't have support for SSL-using EAP methods.
>
> And there's clearly no reason to recompile even FR, let alone three other
> different pieces of software. (For the former, just use lenny-backports.)
>
> The final error state is:
>
> > > Mon Nov 1 15:06:10 2010 : Auth: Login incorrect:
> > > [eduardo/1\320\026\305\020B)\323I\211????\001\nx\204] (from client
> > > BrasilTelecom port 1812)
> > > Mon Nov 1 15:06:10 2010 : Debug: WARNING: Unprintable characters in
> the
> > > password. Double-check the shared secret on the server and the NAS!
>
> So, have you double-checked the shared secret?
>
> --
> 2. That which causes joy or happiness.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20101104/d7309bb7/attachment.html>
More information about the Freeradius-Users
mailing list