radusergroup problem
Fabricio Viana
fabricioviana at hotmail.com
Thu Nov 11 15:24:50 CET 2010
Hello!
I use FreeRadius version 2.1.7 x64, Cent OS 5.5 and MySQL 5.1.47 x64 14:14 Distrib. I'm having the following problem:
For no apparent reason some logins simply disappear from the 'radusergroup'.
The login remains in the 'radcheck' but simply disappears from 'radusergroup'.
The FreeRadius for some reason can modify the table 'radusergroup'? As I understand the FreeRadius modifies the table 'radacct' but not 'radusergroup'. Am I wrong?
Could be a configuration problem or a bug?
Thanks!! Fabricio
Below is my file dialup.conf (I made some modifications. If another file is needed I can also send it!):
##
## dialup.conf -- MySQL configuration for default schema (schema.sql)
##
## $Id$
# Safe characters list for sql queries. Everything else is replaced
# with their mime-encoded equivalents.
# The default list should be ok
#safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
#######################################################################
# Query config: Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
# everywhere a username substitution is needed so you you can be sure
# the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
# Use Stripped-User-Name, if it's there.
# Else use User-Name, if it's there,
# Else use hard-coded string "DEFAULT" as the user name.
#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
#
sql_user_name = "%{User-Name}"
#######################################################################
# Default profile
#######################################################################
# This is the default profile. It is found in SQL by group membership.
# That means that this profile must be a member of at least one group
# which will contain the corresponding check and reply items.
# This profile will be queried in the authorize section for every user.
# The point is to assign all users a default profile without having to
# manually add each one to a group that will contain the profile.
# The SQL module will also honor the User-Profile attribute. This
# attribute can be set anywhere in the authorize section (ie the users
# file). It is found exactly as the default profile is found.
# If it is set then it will *overwrite* the default profile setting.
# The idea is to select profiles based on checks on the incoming packets,
# not on user group membership. For example:
# -- users file --
# DEFAULT Service-Type == Outbound-User, User-Profile := "outbound"
# DEFAULT Service-Type == Framed-User, User-Profile := "framed"
#
# By default the default_user_profile is not set
#
#default_user_profile = "DEFAULT"
#######################################################################
# NAS Query
#######################################################################
# This query retrieves the radius clients
#
# 0. Row ID (currently unused)
# 1. Name (or IP address)
# 2. Shortname
# 3. Type
# 4. Secret
#######################################################################
# Use these for case sensitive usernames.
# authorize_check_query = "SELECT id, username, attribute, value, op \
# FROM ${authcheck_table} \
# WHERE username = BINARY '%{SQL-User-Name}' \
# ORDER BY id"
# authorize_reply_query = "SELECT id, username, attribute, value, op \
# FROM ${authreply_table} \
# WHERE username = BINARY '%{SQL-User-Name}' \
# ORDER BY id"
# The default queries are case insensitive. (for compatibility with
# older versions of FreeRADIUS)
#authorize_check_query = "SELECT aut.id, aut.username, aut.attribute, aut.value, aut.op \
# FROM ${authcheck_table} aut \
# WHERE aut.username = '%{SQL-User-Name}' \
# and aut.idrevenda = (SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
# ORDER BY aut.id"
######################################## alterado por Erick - 09/08/2010 ########################################
authorize_check_query = "(SELECT rc.id, rc.username, rc.attribute, rc.value, rc.op \
FROM ${authcheck_table} rc \
WHERE rc.username = '%{SQL-User-Name}' \
and rc.idrevenda = \
(SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
) UNION ( \
SELECT rgc.id, rc.username, rgc.attribute, rgc.value, rgc.op \
FROM ${authcheck_table} rc, ${groupcheck_table} rgc, ${usergroup_table} rug \
WHERE rc.username = '%{SQL-User-Name}' \
and rc.idrevenda = \
(SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
and rc.username = rug.username \
and rgc.groupname = rug.groupname)"
#################################################################################################################
authorize_reply_query = "SELECT rp.id, rp.username, rp.attribute, rp.value, rp.op \
FROM ${authreply_table} rp \
WHERE rp.username = '%{SQL-User-Name}' \
and rp.idrevenda = (SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
ORDER BY rp.id"
# Use these for case sensitive usernames.
# group_membership_query = "SELECT groupname \
# FROM ${usergroup_table} \
# WHERE username = BINARY '%{SQL-User-Name}' \
# ORDER BY priority"
group_membership_query = "SELECT groupname \
FROM ${usergroup_table} ug \
WHERE ug.username = '%{SQL-User-Name}' \
and ug.idrevenda = (SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
ORDER BY ug.priority"
authorize_group_check_query = "SELECT gc.id, gc.groupname, gc.attribute, \
gc.Value, gc.op \
FROM ${groupcheck_table} gc \
WHERE gc.groupname = '%{Sql-Group}' \
and gc.idrevenda = (SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
ORDER BY gc.id"
authorize_group_reply_query = "SELECT gr.id, gr.groupname, gr.attribute, \
gr.value, gr.op \
FROM ${groupreply_table} gr \
WHERE gr.groupname = '%{Sql-Group}' \
and gr.idrevenda = (SELECT distinct n.idrevenda FROM ${nas_table} n WHERE n.nasname = '%{NAS-IP-Address}' LIMIT 0,1) \
ORDER BY gr.id"
#######################################################################
# Accounting Queries
#######################################################################
# accounting_onoff_query - query for Accounting On/Off packets
# accounting_update_query - query for Accounting update packets
# accounting_update_query_alt - query for Accounting update packets
# (alternate in case first query fails)
# accounting_start_query - query for Accounting start packets
# accounting_start_query_alt - query for Accounting start packets
# (alternate in case first query fails)
# accounting_stop_query - query for Accounting stop packets
# accounting_stop_query_alt - query for Accounting start packets
# (alternate in case first query doesn't
# affect any existing rows in the table)
#######################################################################
accounting_onoff_query = "\
UPDATE ${acct_table1} \
SET \
acctstoptime = '%S', \
acctsessiontime = unix_timestamp('%S') - \
unix_timestamp(acctstarttime), \
acctterminatecause = '%{Acct-Terminate-Cause}', \
acctstopdelay = %{%{Acct-Delay-Time}:-0} \
WHERE acctstoptime IS NULL \
AND nasipaddress = '%{NAS-IP-Address}' \
AND acctstarttime <= '%S'"
accounting_update_query = " \
UPDATE ${acct_table1} \
SET \
framedipaddress = '%{Framed-IP-Address}', \
acctsessiontime = '%{Acct-Session-Time}', \
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | \
'%{%{Acct-Input-Octets}:-0}', \
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | \
'%{%{Acct-Output-Octets}:-0}' \
WHERE acctsessionid = '%{Acct-Session-Id}' \
AND username = '%{SQL-User-Name}' \
AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " \
INSERT INTO ${acct_table1} \
(acctsessionid, acctuniqueid, username, \
realm, nasipaddress, nasportid, \
nasporttype, acctstarttime, acctsessiontime, \
acctauthentic, connectinfo_start, acctinputoctets, \
acctoutputoctets, calledstationid, callingstationid, \
servicetype, framedprotocol, framedipaddress, \
acctstartdelay, xascendsessionsvrkey) \
VALUES \
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
'%{SQL-User-Name}', \
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', \
'%{NAS-Port-Type}', \
DATE_SUB('%S', \
INTERVAL (%{%{Acct-Session-Time}:-0} + \
%{%{Acct-Delay-Time}:-0}) SECOND), \
'%{Acct-Session-Time}', \
'%{Acct-Authentic}', '', \
'%{%{Acct-Input-Gigawords}:-0}' << 32 | \
'%{%{Acct-Input-Octets}:-0}', \
'%{%{Acct-Output-Gigawords}:-0}' << 32 | \
'%{%{Acct-Output-Octets}:-0}', \
'%{Called-Station-Id}', '%{Calling-Station-Id}', \
'%{Service-Type}', '%{Framed-Protocol}', \
'%{Framed-IP-Address}', \
'0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " \
INSERT INTO ${acct_table1} \
(acctsessionid, acctuniqueid, username, \
realm, nasipaddress, nasportid, \
nasporttype, acctstarttime, acctstoptime, \
acctsessiontime, acctauthentic, connectinfo_start, \
connectinfo_stop, acctinputoctets, acctoutputoctets, \
calledstationid, callingstationid, acctterminatecause, \
servicetype, framedprotocol, framedipaddress, \
acctstartdelay, acctstopdelay, xascendsessionsvrkey) \
VALUES \
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
'%{SQL-User-Name}', \
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', \
'%{NAS-Port-Type}', '%S', NULL, \
'0', '%{Acct-Authentic}', '%{Connect-Info}', \
'', '0', '0', \
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', \
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', \
'%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " \
UPDATE ${acct_table1} SET \
acctstarttime = '%S', \
acctstartdelay = '%{%{Acct-Delay-Time}:-0}', \
connectinfo_start = '%{Connect-Info}' \
WHERE acctsessionid = '%{Acct-Session-Id}' \
AND username = '%{SQL-User-Name}' \
AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " \
UPDATE ${acct_table2} SET \
acctstoptime = '%S', \
acctsessiontime = '%{Acct-Session-Time}', \
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | \
'%{%{Acct-Input-Octets}:-0}', \
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | \
'%{%{Acct-Output-Octets}:-0}', \
acctterminatecause = '%{Acct-Terminate-Cause}', \
acctstopdelay = '%{%{Acct-Delay-Time}:-0}', \
connectinfo_stop = '%{Connect-Info}' \
WHERE acctsessionid = '%{Acct-Session-Id}' \
AND username = '%{SQL-User-Name}' \
AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " \
INSERT INTO ${acct_table2} \
(acctsessionid, acctuniqueid, username, \
realm, nasipaddress, nasportid, \
nasporttype, acctstarttime, acctstoptime, \
acctsessiontime, acctauthentic, connectinfo_start, \
connectinfo_stop, acctinputoctets, acctoutputoctets, \
calledstationid, callingstationid, acctterminatecause, \
servicetype, framedprotocol, framedipaddress, \
acctstartdelay, acctstopdelay) \
VALUES \
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
'%{SQL-User-Name}', \
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', \
'%{NAS-Port-Type}', \
DATE_SUB('%S', \
INTERVAL (%{%{Acct-Session-Time}:-0} + \
%{%{Acct-Delay-Time}:-0}) SECOND), \
'%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', \
'%{Connect-Info}', \
'%{%{Acct-Input-Gigawords}:-0}' << 32 | \
'%{%{Acct-Input-Octets}:-0}', \
'%{%{Acct-Output-Gigawords}:-0}' << 32 | \
'%{%{Acct-Output-Octets}:-0}', \
'%{Called-Station-Id}', '%{Calling-Station-Id}', \
'%{Acct-Terminate-Cause}', \
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', \
'0', '%{%{Acct-Delay-Time}:-0}')"
#######################################################################
# Simultaneous Use Checking Queries
#######################################################################
# simul_count_query - query for the number of current connections
# - If this is not defined, no simultaneouls use checking
# - will be performed by this module instance
# simul_verify_query - query to return details of current connections for verification
# - Leave blank or commented out to disable verification step
# - Note that the returned field order should not be changed.
#######################################################################
# Uncomment simul_count_query to enable simultaneous use checking
simul_count_query = "SELECT COUNT(*) \
FROM ${acct_table1} \
WHERE username = '%{SQL-User-Name}' \
AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, \
nasipaddress, nasportid, framedipaddress, \
callingstationid, framedprotocol \
FROM ${acct_table1} \
WHERE username = '%{SQL-User-Name}' \
AND acctstoptime IS NULL"
#######################################################################
# Authentication Logging Queries
#######################################################################
# postauth_query - Insert some info after authentication
#######################################################################
postauth_query = "INSERT INTO ${postauth_table} \
(username, pass, reply, authdate) \
VALUES ( \
'%{User-Name}', \
'%{%{User-Password}:-%{Chap-Password}}', \
'%{reply:Packet-Type}', '%S')"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20101111/cedb0163/attachment.html>
More information about the Freeradius-Users
mailing list