still not working (newbie for radius)

[gahn]

thanks tim:

yes, it is better but yet working correctly:

gahn at giraffe:~:$ ssh bob at 192.168.255.138
bob at 192.168.255.138's password: 
Permission denied, please try again.
bob at 192.168.255.138's password: 
Permission denied, please try again.
bob at 192.168.255.138's password: 
Permission denied (publickey,password,keyboard-interactive).

but trying local username "labrat" is working fine:

gahn at giraffe:~:$ ssh labrat at 192.168.255.138
labrat at 192.168.255.138's password: 
--- JUNOS 8.5R4.3 built 2008-08-12 23:16:55 UTC
labrat at lab-r8>

what is interesting here is that now i can see "Access-Accept" in the debugging messages of "radiusd -X":

rad_recv: Access-Request packet from host 192.168.255.138 port 65003, id=3, length=57
        User-Name = "bob"
        User-Password = "bob"
        NAS-Identifier = "lab-r8"
        NAS-IP-Address = 150.150.0.1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bob", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry bob at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
+- entering group PAP {...}
[pap] login attempt with password "bob"
[pap] Using clear text password "bob"
[pap] User authenticated successfully
++[pap] returns ok
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 3 to 192.168.255.138 port 65003
        Juniper-Local-User-Name = "labrat"
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.255.138 port 65003, id=3, length=57
Sending duplicate reply to client r8 port 65003 - ID: 3
Sending Access-Accept of id 3 to 192.168.255.138 port 65003
Waking up in 1.9 seconds.
Cleaning up request 4 ID 3 with timestamp +91
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.255.138 port 65003, id=3, length=57
        User-Name = "bob"
        User-Password = "bob"
        NAS-Identifier = "lab-r8"
        NAS-IP-Address = 150.150.0.1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bob", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry bob at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
+- entering group PAP {...}
[pap] login attempt with password "bob"
[pap] Using clear text password "bob"
[pap] User authenticated successfully
++[pap] returns ok
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 3 to 192.168.255.138 port 65003
        Juniper-Local-User-Name = "labrat"
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 5 ID 3 with timestamp +97
Ready to process requests.



--- On Sun, 9/19/10, Tim Sylvester <tim.sylvester at networkradius.com> wrote:

> From: Tim Sylvester <tim.sylvester at networkradius.com>
> Subject: RE: still not working (newbie for radius)
> To: "'FreeRadius users mailing list'" <freeradius-users at lists.freeradius.org>
> Date: Sunday, September 19, 2010, 5:52 PM
> 
> well, i had tried other configuration for "users":
> 
> bob     Cleartext-Password = "bob"
>          Juniper-Local-User-Name = "labrat"
> 
> labrat is local login user id so that all of radius users
> will be mapped to
> that user. unfortunately, it is also failed though with no
> warning messages:
> 
> 
> <tim> You are missing a : - try the following:
> 
> bob     Cleartext-Password := "bob"
>         Juniper-Local-User-Name =
> "labrat"
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html