Returning attributes based on group membership using NTLM_AUTH
Moe, John
jmoe at hatch.com.au
Mon Aug 8 05:11:54 CEST 2011
Oh goodie, I'm getting somewhere. :-)
1) So, I don't need to uncomment "ldap" in the authenticate section, as it's
not going to do the password validation, right?
2) Do I just configure the module, put "ldap" in the authorize section of
sites-enables/default, and put "Ldap-Group" in the check-items?
3) How much/what options do I need to configure in the ldap module config?
I've configured server, basedn, filter, groupname_attribute,
groupmembership_filter and groupmembership_attribute, but all I get is
"Operations error". If I add identity and secret, I get a "Referral" failure.
I've also tried the chase_referrals and rebind options, both with and without
the identity/secret optinos, but they don't seem to change anything.
FWIW, if I take out the Ldap-Group check-item, I get an Access-Accept, so
everything else should be working fine, only the LDAP lookup seems to be not
working.
Debug info attached:
FreeRADIUS Version 2.1.7, for host x86_64-pc-linux-gnu, built on Jul 21 2011
at 09:07:01
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/mschap.default
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/control-socket
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = no
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
require_message_authenticator = no
secret = "testing123"
}
client bri8021xtest.my.domain.name {
ipaddr = 10.73.4.30
require_message_authenticator = no
secret = "mysecret"
shortname = "bri8021xtest"
nastype = "cisco"
}
client bri8021xtest2.my.domain.name {
ipaddr = 10.73.4.31
require_message_authenticator = no
secret = "mysecret"
shortname = "bri8021xtest2"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
ntlm_auth =
"/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYDOMAIN}
--challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Instantiating ntlm_auth
exec ntlm_auth {
wait = yes
program =
"/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
input_pairs = "request"
shell_escape = yes
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_ldap
Module: Instantiating ldap
ldap {
server = "mygc.my.domain.name"
port = 389
password = ""
identity = ""
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "dc=my,dc=domain,dc=name"
filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
chase_referrals = yes
rebind = yes
groupname_attribute = "cn"
groupmembership_filter = "(&(objectClass=group)(member=%Ldap-UserDn}))"
groupmembership_attribute = "memberOf"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
set_auth_type = no
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0xbf71e0
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.73.4.31 port 1025, id=136,
length=94
User-Name = "username"
User-Password = "password"
NAS-Identifier = "BRI8021XTEST2"
NAS-Port-Type = Virtual
Service-Type = NAS-Prompt-User
Message-Authenticator = 0x47738b0445f8bbbf4e0580b0f5dfdbf7
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "username", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
rlm_ldap: Entering ldap_groupcmp()
[files] expand: dc=my,dc=domain,dc=name -> dc=my,dc=domain,dc=name
[files] expand: %{Stripped-User-Name} ->
[files] expand: %{User-Name} -> username
[files] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=username)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to mygc.my.domain.name:389, authentication 0
rlm_ldap: bind as / to mygc.my.domain.name:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=my,dc=domain,dc=name, with filter
(sAMAccountName=username)
rlm_ldap: ldap_search() failed: Operations error
rlm_ldap::ldap_groupcmp: search failed
rlm_ldap: ldap_release_conn: Release Id: 0
rlm_ldap: Entering ldap_groupcmp()
[files] expand: dc=my,dc=domain,dc=name -> dc=my,dc=domain,dc=name
[files] expand: %{Stripped-User-Name} ->
[files] expand: %{User-Name} -> username
[files] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=username)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: closing existing LDAP connection
rlm_ldap: (re)connect to mygc.my.domain.name:389, authentication 0
rlm_ldap: bind as / to mygc.my.domain.name:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=my,dc=domain,dc=name, with filter
(sAMAccountName=username)
rlm_ldap: ldap_search() failed: Operations error
rlm_ldap::ldap_groupcmp: search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[files] returns noop
[ldap] performing user authorization for username
[ldap] expand: %{Stripped-User-Name} ->
[ldap] expand: %{User-Name} -> username
[ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=username)
[ldap] expand: dc=my,dc=domain,dc=name -> dc=my,dc=domain,dc=name
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: closing existing LDAP connection
rlm_ldap: (re)connect to mygc.my.domain.name:389, authentication 0
rlm_ldap: bind as / to mygc.my.domain.name:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=my,dc=domain,dc=name, with filter
(sAMAccountName=username)
rlm_ldap: ldap_search() failed: Operations error
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns fail
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> username
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 136 to 10.73.4.31 port 1025
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.4.31 port 1025, id=137,
length=94
User-Name = "username"
User-Password = "password"
NAS-Identifier = "BRI8021XTEST2"
NAS-Port-Type = Virtual
Service-Type = NAS-Prompt-User
Message-Authenticator = 0xa1a963fcd5263b1fc947cda19760da25
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "username", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
rlm_ldap: Entering ldap_groupcmp()
[files] expand: dc=my,dc=domain,dc=name -> dc=my,dc=domain,dc=name
[files] expand: %{Stripped-User-Name} ->
[files] expand: %{User-Name} -> username
[files] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=username)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: closing existing LDAP connection
rlm_ldap: (re)connect to mygc.my.domain.name:389, authentication 0
rlm_ldap: bind as / to mygc.my.domain.name:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=my,dc=domain,dc=name, with filter
(sAMAccountName=username)
rlm_ldap: ldap_search() failed: Operations error
rlm_ldap::ldap_groupcmp: search failed
rlm_ldap: ldap_release_conn: Release Id: 0
rlm_ldap: Entering ldap_groupcmp()
[files] expand: dc=my,dc=domain,dc=name -> dc=my,dc=domain,dc=name
[files] expand: %{Stripped-User-Name} ->
[files] expand: %{User-Name} -> username
[files] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=username)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: closing existing LDAP connection
rlm_ldap: (re)connect to mygc.my.domain.name:389, authentication 0
rlm_ldap: bind as / to mygc.my.domain.name:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=my,dc=domain,dc=name, with filter
(sAMAccountName=username)
rlm_ldap: ldap_search() failed: Operations error
rlm_ldap::ldap_groupcmp: search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[files] returns noop
[ldap] performing user authorization for username
[ldap] expand: %{Stripped-User-Name} ->
[ldap] expand: %{User-Name} -> username
[ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=username)
[ldap] expand: dc=my,dc=domain,dc=name -> dc=my,dc=domain,dc=name
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: closing existing LDAP connection
rlm_ldap: (re)connect to mygc.my.domain.name:389, authentication 0
rlm_ldap: bind as / to mygc.my.domain.name:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=my,dc=domain,dc=name, with filter
(sAMAccountName=username)
rlm_ldap: ldap_search() failed: Operations error
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns fail
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> username
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 1
Sending Access-Reject of id 137 to 10.73.4.31 port 1025
Waking up in 3.9 seconds.
Cleaning up request 0 ID 136 with timestamp +11
Waking up in 1.0 seconds.
Cleaning up request 1 ID 137 with timestamp +12
Ready to process requests.
John H. Moe
Network Support - Hatch IT
HATCH
Tel: +61 (7) 3166 7777
Direct: +61 (7) 3166 7684
Fax: +61 (7) 3368 3754
Mobile: +61 438 772 425
61 Petrie Terrace, Brisbane, Queensland Australia 4011
> -----Original Message-----
> From: freeradius-users-bounces+jmoe=hatch.com.au at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+jmoe=hatch.com.au at lists.freeradius.org] On Behalf Of Arran
> Cudbard-Bell
> Sent: Wednesday, 3 August 2011 4:15 PM
> To: FreeRadius users mailing list
> Subject: Re: Returning attributes based on group membership using
> NTLM_AUTH
>
> Coooorrrrect ! :)
>
> -Arran
>
>
> On 3 Aug 2011, at 06:19, Moe, John wrote:
>
> > Sorry to reply to my own post, but I think I've found the answer; can
> > someone let me know if I'm on the right track?
> >
> > I believe that I should be using ntlm_auth to *only* validate the
> *password*
> > in the authenticate section. And then I'll need to configure the
> LDAP
> > module and use Ldap-Group as an additional item to match against in
> the
> > users file to return the appropriate Service-Type attribute?
> >
> > John H. Moe
> > Network Support - Hatch IT
> > HATCH
> > Tel: +61 (7) 3166 7777
> > Direct: +61 (7) 3166 7684
> > Fax: +61 (7) 3368 3754
> > Mobile: +61 438 772 425
> > 61 Petrie Terrace, Brisbane, Queensland Australia 4000
[ snip ]
> Arran Cudbard-Bell
> a.cudbardb at freeradius.org
>
> RADIUS - Half the complexity of Diameter
*****************************
NOTICE - This message from Hatch is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential or proprietary.
Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, arrive late or contain viruses. By communicating with us via e-mail, you accept such risks. When addressed to our clients, any information, drawings, opinions or advice (collectively, "information") contained in this e-mail is subject to the terms and conditions expressed in the governing agreements. Where no such agreement exists, the recipient shall neither rely upon nor disclose to others, such information without our written consent. Unless otherwise agreed, we do not assume any liability with respect to the accuracy or completeness of the information set out in this e-mail. If you have received this message in error, please notify us immediately by return e-mail and destroy and delete the message from your computer.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5549 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110808/bed1b9c7/attachment.bin>
More information about the Freeradius-Users
mailing list