Wired 802.1X + FreeRADIUS + LDAP issue
Ryan Garland
sheffy at gmail.com
Sat Dec 10 01:50:56 CET 2011
Hi all,
I have been tasked with implementing 802.1X for our office wireless & wired
connectivity - wireless through an Aruba AP, wired through a Dell
PowerConnect 6200 switch - by using FreeRADIUS (2.1.12) and our backend
LDAP server (Open DS). FreeRADIUS is running on Ubuntu 10.04.
* Wireless 802.1X auth is working properly (verified on both OS X and Win
7) using TTLS+PAP - debug output attached for reference.
* Wired 802.1X auth is not working, and I am not sure why. This is where I
am hoping to be pointed in the right direction - debug output attached for
this as well.
For wireless, my supplicant (laptop running OS X Lion) has an 802.1X
profile configured (tried with and without the FreeRADIUS server's ca
certificate (ca.der)), connects to the Aruba, gets prompted for
login/password, the credentials pass auth with LDAP, a certificate gets
installed in my Keychain, and network access is granted. Yay!
For wired, I have the same 802.1X profile configured, the laptop connects
to the switch, EAP begins, the Access-Challenge gets returned, but there is
seemingly no further communication done.
(It has been confirmed using tcpdump that the supplicant is receiving the
response from FreeRADIUS.)
I get a Warning message from FreeRADIUS indicating that EAP did not
complete. The message directs me to a Certificate Compatibility page on
the FR wiki, but unfortunately that points a lot of fingers at Windows,
which my laptop is not running.
We have also tried creating the certs with the bootstrap program and
modifying eap.conf accordingly, to no avail.
For reference, eapol_test also fails in the same manner when running
locally on the FreeRADIUS box.
I am sure I am missing something - probably something simple - but I just
have not been able to figure it out, and I am clearly not very good at
reading the debug output. :-(
I have been researching this for quite some time and have found a lot of
helpful information from people on this list, so I hope somebody can help
me pinpoint the issue.
My apologies if I was too wordy. Any help is greatly appreciated.
-- RG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20111209/e117a6bc/attachment.html>
-------------- next part --------------
FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Oct 7 2011 at 10:59:41
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/mschap.dpkg-dist
including configuration file /etc/freeradius/modules/ldap.dpkg-dist
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 10.9.252.177/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "oldradius"
nastype = "other"
}
client 10.0.1.1/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "host-sfo01-or01"
nastype = "other"
}
client 10.1.6.105/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "ldap3-local"
}
client 10.0.1.10/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "host-sfo01-aruba"
nastype = "other"
}
client 10.0.1.94/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "garydesktop"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Auth-Type = ldap
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
mschap {
use_mppe = no
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
allow_retry = yes
}
Module: Linked to module rlm_ldap
Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap
ldap {
server = "ldap.domain.com"
port = 1389
password = ""
identity = ""
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "dc=domain,dc=com"
filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/freeradius/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
edir_account_policy_check = no
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id
conns: 0x929a50
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/etc/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
detail {
detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 7378
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.1.10 port 32794, id=7, length=166
User-Name = "ryan"
NAS-IP-Address = 10.0.1.10
NAS-Port = 0
NAS-Identifier = "10.0.1.10"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "1093E903D202"
Called-Station-Id = "000B86642920"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x02010009017279616e
Aruba-Essid-Name = "Testing-RL"
Aruba-Location-Id = "Geary-DataCloset"
Message-Authenticator = 0x23f4e349b19b8d78a4a2a8ec65b5f55c
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for ryan
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> ryan
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=ryan)
[ldap] expand: dc=domain,dc=com -> dc=domain,dc=com
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] attempting LDAP reconnection
[ldap] (re)connect to ldap.domain.com:1389, authentication 0
[ldap] bind as / to ldap.domain.com:1389
[ldap] waiting for bind result ...
[ldap] Bind was successful
[ldap] performing search in dc=domain,dc=com, with filter (uid=ryan)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly?
[ldap] user ryan authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 7 to 10.0.1.10 port 32794
EAP-Message = 0x010200061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb9fb2e51b9f93b9137f9557604d32de8
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.1.10 port 32794, id=8, length=307
User-Name = "ryan"
NAS-IP-Address = 10.0.1.10
NAS-Port = 0
NAS-Identifier = "10.0.1.10"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "1093E903D202"
Called-Station-Id = "000B86642920"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x0202008415800000007a16030100750100007103014ee277d7781373ce6932dc16933aba32f901252a32b4a522c081a117c8b5575a000036c00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a00320033003800390016001301000012000a00080006001700180019000b00020100
State = 0xb9fb2e51b9f93b9137f9557604d32de8
Aruba-Essid-Name = "Testing-RL"
Aruba-Location-Id = "Geary-DataCloset"
Message-Authenticator = 0x287dad20985c6beb0e8cb53b356e7d4f
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 132
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
TLS Length 122
[ttls] Length Included
[ttls] eaptls_verify returned 11
[ttls] (other): before/accept initialization
[ttls] TLS_accept: before/accept initialization
[ttls] <<< TLS 1.0 Handshake [length 0075], ClientHello
[ttls] TLS_accept: SSLv3 read client hello A
[ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello
[ttls] TLS_accept: SSLv3 write server hello A
[ttls] >>> TLS 1.0 Handshake [length 01b9], Certificate
[ttls] TLS_accept: SSLv3 write certificate A
[ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[ttls] TLS_accept: SSLv3 write server done A
[ttls] TLS_accept: SSLv3 flush data
[ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 8 to 10.0.1.10 port 32794
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x00040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb9fb2e51b8f83b9137f9557604d32de8
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.1.10 port 32794, id=9, length=383
User-Name = "ryan"
NAS-IP-Address = 10.0.1.10
NAS-Port = 0
NAS-Identifier = "10.0.1.10"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "1093E903D202"
Called-Station-Id = "000B86642920"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020300d01580000000c616030100861000008200808fbe52d9f15a0f8d66be63f69b9a80c473b2d4ab7596e5c6fabe2c9fc44c7cda57b05b1159af99eb057a19b4090dda78f8cba446843fed9f06e340294977aa8685d0d2dc3b6619559942ee93ee11e8b7ad43efbefa6d9973b19db6eb638f17c89d03fb6d1751e301aad81d577fc8d16e6a1b41451c2d520044be5fa56887715b1403010001011603010030f53339e30ecdafc316c6e899c97fc940ea54c317c459685c96fd01f0f56735487fba7a24cf6412cff418c939b919d677
State = 0xb9fb2e51b8f83b9137f9557604d32de8
Aruba-Essid-Name = "Testing-RL"
Aruba-Location-Id = "Geary-DataCloset"
Message-Authenticator = 0xd961b0128533ffd91e1b044ec157146d
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 208
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
TLS Length 198
[ttls] Length Included
[ttls] eaptls_verify returned 11
[ttls] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
[ttls] TLS_accept: SSLv3 read client key exchange A
[ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[ttls] <<< TLS 1.0 Handshake [length 0010], Finished
[ttls] TLS_accept: SSLv3 read finished A
[ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[ttls] TLS_accept: SSLv3 write change cipher spec A
[ttls] >>> TLS 1.0 Handshake [length 0010], Finished
[ttls] TLS_accept: SSLv3 write finished A
[ttls] TLS_accept: SSLv3 flush data
[ttls] (other): SSL negotiation finished successfully
SSL Connection Established
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 9 to 10.0.1.10 port 32794
EAP-Message = 0x0104004515800000003b1403010001011603010030ef2c9ba49309dc4c156e0233a6dcdf30037ccc264eab71278098bccdacff873713a8815d99a512a78cd08fbe52c68215
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb9fb2e51bbff3b9137f9557604d32de8
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.1.10 port 32794, id=10, length=254
User-Name = "ryan"
NAS-IP-Address = 10.0.1.10
NAS-Port = 0
NAS-Identifier = "10.0.1.10"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "1093E903D202"
Called-Station-Id = "000B86642920"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x0204004f1580000000451703010040d9d802a426a23df47dacb1b9f959d852631edaf1a5dc0031f41e5e4b78328ee4be603187c7d3b29387087d0be1711c42ca1354eff6eda236381d0f72178cb04d
State = 0xb9fb2e51bbff3b9137f9557604d32de8
Aruba-Essid-Name = "Testing-RL"
Aruba-Location-Id = "Geary-DataCloset"
Message-Authenticator = 0x71235e8241c71949094da4fe1287ca3a
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 79
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
TLS Length 69
[ttls] Length Included
[ttls] eaptls_verify returned 11
[ttls] eaptls_process returned 7
[ttls] Session established. Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
User-Name = "ryan"
User-Password = "garyrocks"
FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Sending tunneled request
User-Name = "ryan"
User-Password = "garyrocks"
FreeRADIUS-Proxied-To = 127.0.0.1
server inner-tunnel {
# Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[ldap] performing user authorization for ryan
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> ryan
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=ryan)
[ldap] expand: dc=domain,dc=com -> dc=domain,dc=com
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=domain,dc=com, with filter (uid=ryan)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly?
[ldap] Setting Auth-Type = ldap
[ldap] user ryan authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = ldap
# Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
+- entering group authenticate {...}
[ldap] login attempt by "ryan" with password "garyrocks"
[ldap] user DN: cn=Ryan Garland,ou=Users,dc=domain,dc=com
[ldap] (re)connect to ldap.domain.com:1389, authentication 1
[ldap] bind as cn=Ryan Garland,ou=Users,dc=domain,dc=com/garyrocks to ldap.domain.com:1389
[ldap] waiting for bind result ...
[ldap] Bind was successful
[ldap] user ryan authenticated succesfully
++[ldap] returns ok
WARNING: Empty post-auth section. Using default return values.
# Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel
} # server inner-tunnel
[ttls] Got tunneled reply code 2
[ttls] Got tunneled Access-Accept
[eap] Freeing handler
++[eap] returns ok
# Executing section post-auth from file /etc/freeradius/sites-enabled/default
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 10 to 10.0.1.10 port 32794
MS-MPPE-Recv-Key = 0x817843f64955a7e303ede70b0ae467645105a2635fe2b2648c3d7c0704351062
MS-MPPE-Send-Key = 0x6a54e003c342b79e5c94a804d40757e57e7035a90cf71732149b00ea1090a5eb
EAP-Message = 0x03040004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "ryan"
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 7 with timestamp +23
Cleaning up request 1 ID 8 with timestamp +23
Cleaning up request 2 ID 9 with timestamp +23
Cleaning up request 3 ID 10 with timestamp +23
Ready to process requests.
-------------- next part --------------
FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Oct 7 2011 at 10:59:41
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/mschap.dpkg-dist
including configuration file /etc/freeradius/modules/ldap.dpkg-dist
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 10.9.252.177/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "oldradius"
nastype = "other"
}
client 10.0.1.1/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "host-sfo01-or01"
nastype = "other"
}
client 10.1.6.105/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "ldap3-local"
}
client 10.0.1.10/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "host-sfo01-aruba"
nastype = "other"
}
client 10.0.1.94/32 {
require_message_authenticator = no
secret = "testing123"
shortname = "garydesktop"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Auth-Type = ldap
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
mschap {
use_mppe = no
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
allow_retry = yes
}
Module: Linked to module rlm_ldap
Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap
ldap {
server = "ldap.domain.com"
port = 1389
password = ""
identity = ""
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "dc=domain,dc=com"
filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/freeradius/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
edir_account_policy_check = no
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id
conns: 0xb8fa50
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/etc/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
detail {
detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 22133
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.1.1 port 49191, id=43, length=130
User-Name = "ryan"
Called-Station-Id = "5c-26-0a-bb-21-bd"
Calling-Station-Id = "28:37:37:02:73:f8"
NAS-Identifier = "5c-26-0a-bb-21-bb"
NAS-Port = 222
Framed-MTU = 1500
NAS-Port-Type = Ethernet
EAP-Message = 0x02080009017279616e
Message-Authenticator = 0x5ae43347a4aa2358fc7a17ad11957c65
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for ryan
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> ryan
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=ryan)
[ldap] expand: dc=domain,dc=com -> dc=domain,dc=com
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] attempting LDAP reconnection
[ldap] (re)connect to ldap.domain.com:1389, authentication 0
[ldap] bind as / to ldap.domain.com:1389
[ldap] waiting for bind result ...
[ldap] Bind was successful
[ldap] performing search in dc=domain,dc=com, with filter (uid=ryan)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly?
[ldap] user ryan authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 43 to 10.0.1.1 port 49191
EAP-Message = 0x010900061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x0bbb73fa0bb2666fe6cef6f5b5fab5aa
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 43 with timestamp +3
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x0bbb73fa0bb2666f did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.1.1 port 49191, id=43, length=130
User-Name = "ryan"
Called-Station-Id = "5c-26-0a-bb-21-bd"
Calling-Station-Id = "28:37:37:02:73:f8"
NAS-Identifier = "5c-26-0a-bb-21-bb"
NAS-Port = 222
Framed-MTU = 1500
NAS-Port-Type = Ethernet
EAP-Message = 0x02080009017279616e
Message-Authenticator = 0x5ae43347a4aa2358fc7a17ad11957c65
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "ryan", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for ryan
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> ryan
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=ryan)
[ldap] expand: dc=domain,dc=com -> dc=domain,dc=com
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=domain,dc=com, with filter (uid=ryan)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly?
[ldap] user ryan authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 43 to 10.0.1.1 port 49191
EAP-Message = 0x010900061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x14e2ce2314ebdbc4a6abb070798c98a0
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 1 ID 43 with timestamp +19
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x14e2ce2314ebdbc4 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
More information about the Freeradius-Users
mailing list