Problem with mysql-user
Koenraad Lelong
radius01 at de-brouwerij.be
Wed Dec 28 13:22:57 CET 2011
Hi,
I'm new to freeradius, I'm trying to setup freeradius to authenticate
wifi-users using mysql. I'm running freeradius 2.1.12 from Fajar A.
Nugraha (see post on 20 Dec 2011 11:16:27) on ubuntu 10.04. I'm using
the daloradius-gui to create users.
When I try via wifi using a user in the users-file, that user is
accepted, a user in the mysql database is rejected.
When I try the "mysql-user" with radtest, the user is authenticated :
# radtest mtester1 mtester1 localhost 0 testing123
Sending Access-Request of id 56 to 127.0.0.1 port 1812
User-Name = "mtester1"
User-Password = "mtester1"
NAS-IP-Address = 127.0.1.1
NAS-Port = 0
Message-Authenticator = 0x00000000000000000000000000000000
rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=56,
length=20
What am I doing wrong ?
Thanks,
Koenraad Lelong.
This is the log when trying the mysql-user via wifi :
FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Oct 7
2011 at 10:59:41
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/preprocess
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/sql.conf
including configuration file /etc/freeradius/sql/mysql/dialup.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client accesspoint2 {
ipaddr = 192.168.185.14
require_message_authenticator = no
secret = "fVn579og18h"
nastype = "other"
}
client accesspoint {
ipaddr = 192.168.185.8
require_message_authenticator = no
secret = "azertyuiop"
nastype = "other"
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client ::1 {
require_message_authenticator = no
secret = "testing123"
shortname = "localhost"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/etc/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /etc/freeradius/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = ""
login = "radius"
password = "radiusPassWord"
radius_db = "radius"
read_groups = yes
sqltrace = yes
sqltracefile = "/var/log/freeradius/sqltrace.sql"
readclients = no
deletestalesessions = yes
num_sql_socks = 5
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname =
'%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname =
'%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
unix_timestamp('%S') -
unix_timestamp(acctstarttime), acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
%{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL
AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime
<= '%S'"
accounting_update_query = " UPDATE radacct SET
framedipaddress = '%{Framed-IP-Address}',
acctsessiontime = '%{Acct-Session-Time}',
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE
acctsessionid = '%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype,
acctstarttime, acctsessiontime, acctauthentic,
connectinfo_start, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, servicetype,
framedprotocol, framedipaddress, acctstartdelay,
xascendsessionsvrkey) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S', INTERVAL
(%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND),
'%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype,
acctstarttime, acctstoptime, acctsessiontime,
acctauthentic, connectinfo_start, connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, acctterminatecause, servicetype,
framedprotocol, framedipaddress, acctstartdelay,
acctstopdelay, xascendsessionsvrkey) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL,
'0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0',
'0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0',
'%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET
acctstarttime = '%S', acctstartdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_start =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND
nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
'%{Acct-Session-Time}', acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND
nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S', INTERVAL
(%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0})
SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}',
'', '%{Connect-Info}',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress,
callingstationid, framedprotocol
FROM radacct WHERE
username = '%{SQL-User-Name}' AND
acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES (
'%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file
/etc/freeradius/modules/detail
detail {
detailfile =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from
file /etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 40922
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=0, length=156
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x0200000d016d74657374657231
Message-Authenticator = 0x9227fb64e8450452bbe860990bdb2f3d
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 13
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
[sql] expand: %{User-Name} -> mtester1
[sql] sql_set_user escaped user --> 'mtester1'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER
BY id -> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = 'mtester1' ORDER BY id
rlm_sql_mysql: query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'mtester1' ORDER
BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER
BY id -> SELECT id, username, attribute, value, op FROM
radreply WHERE username = 'mtester1' ORDER BY id
rlm_sql_mysql: query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'mtester1' ORDER
BY id
[sql] expand: SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority ->
SELECT groupname FROM radusergroup WHERE username =
'mtester1' ORDER BY priority
rlm_sql_mysql: query: SELECT groupname FROM radusergroup
WHERE username = 'mtester1' ORDER BY priority
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.185.14 port 1027
EAP-Message = 0x010100160410a24de0b584080fbb1e034f30942feb74
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8ffb6e190f744a4ca7e33f5fc1
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=1, length=167
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x020100060319
State = 0xfb6f1d8ffb6e190f744a4ca7e33f5fc1
Message-Authenticator = 0x5ddf6bf9643fe586173fbc440167488f
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
[sql] expand: %{User-Name} -> mtester1
[sql] sql_set_user escaped user --> 'mtester1'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER
BY id -> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = 'mtester1' ORDER BY id
rlm_sql_mysql: query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'mtester1' ORDER
BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER
BY id -> SELECT id, username, attribute, value, op FROM
radreply WHERE username = 'mtester1' ORDER BY id
rlm_sql_mysql: query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'mtester1' ORDER
BY id
[sql] expand: SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority ->
SELECT groupname FROM radusergroup WHERE username =
'mtester1' ORDER BY priority
rlm_sql_mysql: query: SELECT groupname FROM radusergroup
WHERE username = 'mtester1' ORDER BY priority
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 1 to 192.168.185.14 port 1027
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8ffa6d040f744a4ca7e33f5fc1
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=2, length=361
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message =
0x020200c81980000000be16030100b9010000b503014efafc0967a80394498db33ae6d23a7b2f1d23d55b53dbb4941859c5998090ab000048c014c00a00390038c00fc0050035c012c00800160013c00dc003000ac013c00900330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000044000b000403000102000a00340032000100020003000400050006000700080009000a000b000c000d000e000f001000110012001300140015001600170018001900230000
State = 0xfb6f1d8ffa6d040f744a4ca7e33f5fc1
Message-Authenticator = 0x9f011cfc69f73058e8f37ec36860d37a
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 200
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 190
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 00b9], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 01bf], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange
[peap] TLS_accept: SSLv3 write key exchange A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 2 to 192.168.185.14 port 1027
EAP-Message =
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
EAP-Message =
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
EAP-Message =
0xc9462c57083f160301018d0c0001890080af417ea6886d8a085e9262be01288f66af64e1bc8ae34d25cd5eb83908d65d152e2abe7e699a4e31bcf0d9395d3512a87134f7f238f197023d93652e5cf51ddbf463f1f4ebbc9fe296e680acd0de11341f093a8dfcd6559cccdb14b49a2320c363b94d42c9ffa3c90d530fd063232390cce59e95b6b3e9c550246bde1bebfc1b000102008038dce157eea4bbd5c84722dd625768293291dde741cff47f6e30d7e5391850fd7dc2e5f34a88b0b8686fa9de73457432b910612ca3b5017cf7e713fe300ebaa8a2794c850589ca21bc9bd0555f513b9e93b1065a3b6840393f1cfa9181b8a59966ddd33c1bdab8
EAP-Message =
0x3960579855dadc9e06f1924a9c742b554fddb6017016b64830008069d2857facec6c013d31771b6929970e6aadb53288ea544c624cded9b8c61484bfae3e8e1f757db2268c02570c2cc8f0613d6f57fba01794aa6212b3cb6366ea33f76bf65b21a668374a402ddb68e14906cced047a1bc48861f457d4d3adaf4e667a5b47c0065637e33f63fdf3c0e2335e5d830e9590d0ed64f25d971d4185e016030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8ff96c040f744a4ca7e33f5fc1
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=3, length=369
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message =
0x020300d01980000000c616030100861000008200801c2e6089eda9a578c653274f9ba3c620edb11098b7dede14df159c3efc13c84effe35a5584d561f577bf4eefc20e8ae9c093c16c75462867c642e1662327db503157bb720919a4a78892ebeba7bdf84a737bcc8a915af5705b93047ca9cdc8ce8d81aed1b9e0bfeb2af128b022a67fd767794b7720c0d8e69782935fe04b7c781403010001011603010030ea360f92cbc949e7fbcd9d02f4690c8bd114ffbdad94cd7ca02f969f5d21fb1cb0d1de474a068ef85c9d2285e331fae2
State = 0xfb6f1d8ff96c040f744a4ca7e33f5fc1
Message-Authenticator = 0xca4c1446af6828ad61bd097d25cb1c5a
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 208
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 198
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
[peap] TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap] TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 write finished A
[peap] TLS_accept: SSLv3 flush data
[peap] (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 3 to 192.168.185.14 port 1027
EAP-Message =
0x0104004119001403010001011603010030bf263e6fd0d3e9f036eab752545679f15c986b78907bc9e16f7a08d11494c7b6da74f623afe6012dd8b4e95fcd52aac8
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8ff86b040f744a4ca7e33f5fc1
Finished request 3.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=4, length=167
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x020400061900
State = 0xfb6f1d8ff86b040f744a4ca7e33f5fc1
Message-Authenticator = 0x56aec7766b8c740054cf868ce3dbdb48
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
[peap] Session established. Decoding tunneled attributes.
[peap] Peap state TUNNEL ESTABLISHED
++[eap] returns handled
Sending Access-Challenge of id 4 to 192.168.185.14 port 1027
EAP-Message =
0x0105002b1900170301002008f04dd99be432416d646de8d6a39925b5020b8ebb44e4c163db9032b786c0b0
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8fff6a040f744a4ca7e33f5fc1
Finished request 4.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=5, length=241
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message =
0x020500501900170301002026cb465f3fd7edba969a026291282a823270b8f7b7b5a402d38f3fb3a27af45d17030100205a04afc1bb18e0a613263f078278b914119a1cb78801e1418880af7f0f638d16
State = 0xfb6f1d8fff6a040f744a4ca7e33f5fc1
Message-Authenticator = 0xc30145e1f2fda7d6701bd5b5d2433ef2
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Peap state WAITING FOR INNER IDENTITY
[peap] Identity - mtester1
[peap] Got inner identity 'mtester1'
[peap] Setting default EAP type for tunneled EAP session.
[peap] Got tunneled request
EAP-Message = 0x0205000d016d74657374657231
server {
[peap] Setting User-Name to mtester1
Sending tunneled request
EAP-Message = 0x0205000d016d74657374657231
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "mtester1"
server inner-tunnel {
# Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 5 length 13
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
EAP-Message =
0x010600221a0106001d10514d6c3eb1282a4e0e825509da6c87d36d74657374657231
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x389b5ffe389d45b1fe5a106ea19e3db0
[peap] Got tunneled reply RADIUS code 11
EAP-Message =
0x010600221a0106001d10514d6c3eb1282a4e0e825509da6c87d36d74657374657231
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x389b5ffe389d45b1fe5a106ea19e3db0
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 5 to 192.168.185.14 port 1027
EAP-Message =
0x0106004b190017030100404181c98b87b929f7585a2f938a41de590850e03ecd0a63e1d1cbce0f8c660055d7b309ed9887f1edc0b4391bb776d1b3a7269cea901300e6701e98b796c009b0
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8ffe69040f744a4ca7e33f5fc1
Finished request 5.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=6, length=305
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message =
0x0206009019001703010020046b4d412bd8658532d30b31ec31656f96ab19e6fa5bfef24bb748c7458119cc1703010060fcc47aed4764ac81885bd86e8490d090b046364ede1a552655c278e7c4ee9565b2b4321b0059a8e720e1a2e10dc0d0810741de20ccbaa03ce5e0e93b90cb56eb847929e124245e0c943355f064577b3272801ecc73e41b84a2d3ba6c4f7ea044
State = 0xfb6f1d8ffe69040f744a4ca7e33f5fc1
Message-Authenticator = 0xbd576294609771e4e88e500882540849
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 144
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Peap state phase2
[peap] EAP type mschapv2
[peap] Got tunneled request
EAP-Message =
0x020600431a0206003e31d0efd81bc55010af781828e319ba6bc20000000000000000bdf64aea88a1dd14619a42938e9c5f4faefde4630e17aea6006d74657374657231
server {
[peap] Setting User-Name to mtester1
Sending tunneled request
EAP-Message =
0x020600431a0206003e31d0efd81bc55010af781828e319ba6bc20000000000000000bdf64aea88a1dd14619a42938e9c5f4faefde4630e17aea6006d74657374657231
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "mtester1"
State = 0x389b5ffe389d45b1fe5a106ea19e3db0
server inner-tunnel {
# Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 6 length 67
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] # Executing group from file
/etc/freeradius/sites-enabled/inner-tunnel
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured. Cannot create LM-Password.
[mschap] No Cleartext-Password configured. Cannot create NT-Password.
[mschap] Creating challenge hash with username: mtester1
[mschap] Told to do MS-CHAPv2 for mtester1 with NT-Password
[mschap] FAILED: No NT/LM-Password. Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
Login incorrect: [mtester1/<via Auth-Type = EAP>] (from client
accesspoint2 port 0 via TLS tunnel)
} # server inner-tunnel
[peap] Got tunneled reply code 3
MS-CHAP-Error = "\006E=691 R=1"
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
MS-CHAP-Error = "\006E=691 R=1"
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 6 to 192.168.185.14 port 1027
EAP-Message =
0x0107002b1900170301002097bdab26f63d2f6ff9220245471fcb79a246d23eabfc323c064fec7038fcf3ac
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfb6f1d8ffd68040f744a4ca7e33f5fc1
Finished request 6.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.185.14 port 1027,
id=7, length=241
User-Name = "mtester1"
NAS-IP-Address = 192.168.185.14
NAS-Port = 0
Called-Station-Id = "06-18-E7-D4-37-D0:Isengard"
Calling-Station-Id = "18-87-96-5A-25-C6"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message =
0x02070050190017030100206e8f0331ca3b8606b22d2da7708c7209bd3c4d513d1dfc137a985e72ea10d17017030100202040d8ab9f766ad0625215315da6b31e40cdb0aad2f225d09ccbe4933e2d6462
State = 0xfb6f1d8ffd68040f744a4ca7e33f5fc1
Message-Authenticator = 0x7179b504d4fd95c0108ed7a42d5b4152
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "mtester1", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Peap state send tlv failure
[peap] Received EAP-TLV response.
[peap] The users session was previously rejected: returning reject (again.)
[peap] *** This means you need to read the PREVIOUS messages in the
debug output
[peap] *** to find out the reason why the user was rejected.
[peap] *** Look for "reject" or "fail". Those earlier messages will
tell you.
[peap] *** what went wrong, and how to fix the problem.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Login incorrect: [mtester1/<via Auth-Type = EAP>] (from client
accesspoint2 port 0 cli 18-87-96-5A-25-C6)
Using Post-Auth-Type Reject
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> mtester1
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 7 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 7
Sending Access-Reject of id 7 to 192.168.185.14 port 1027
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
More information about the Freeradius-Users
mailing list