Voip database

[miha-]

Thanks @Alan DeKok-2 and @Fajar A. Nugraha for your help!

After exchanging few email with centile I noticed that they are unwilling to
change there configuration setting.
So dou to our softswitch (Centile) for voip It is just not so easy buy and
set a new one.

This radius that we have from Ibill (compatible with centile) we would relay
like to replace due to problems with it.


SO finaly Centile (from the start they telling us that the centile works
with freeradius) said that centile is having problems with 3GPP2.

Is there any way to get this working. Where the changes should be made on
freeradius?
Or to ask in a different way is there any way to get this working :) ?

Thanks!!

I have also tried with ACCEPT like @Fajar A. Nugrah said but I got this
problem (finally my phone begun ringing but new problem rise with media):





++[preprocess] returns ok
[acct_unique] WARNING: Attribute NAS-Port was not found in request, unique
ID MAY be inconsistent
[acct_unique] Hashing ',Client-IP-Address = 212.13.228.58,NAS-IP-Address =
212.13.228.58,Acct-Session-Id = "129464837317821",User-Name = "081609000"'
[acct_unique] Acct-Unique-Session-ID = "d9d5c2ea191e529f".
++[acct_unique] returns ok
[suffix] No '@' in User-Name = "081609000", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[files] returns noop 
Executing section accounting from file /etc/raddb/sites-enabled/default
+- entering group accounting {...}
[detail] expand: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
-> /var/log/radius/radacct/212.13.228.58/detail-20110110
[detail] /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands
to /var/log/radius/radacct/212.13.228.58/detail-20110110
[detail] expand: %t -> Mon Jan 10 09:32:58 2011
++[detail] returns ok
++[unix] returns noop
[radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
[radutmp] expand: %{User-Name} -> 081609000
rlm_radutmp: No NAS-Port seen. Cannot do anything.
rlm_radumtp: WARNING: checkrad will probably not work!
++[radutmp] returns noop
++[exec] returns noop
[attr_filter.accounting_response] expand: %{User-Name} -> 081609000
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 3 to 212.13.228.58 port 35277
Finished request 4.
Cleaning up request 4 ID 3 with timestamp +13
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 3 ID 66 with timestamp +13
Ready to process requests. 
[ Show » ] softnet added a comment - 10/Jan/11 09:53 AM Hello, what about
this issue? I have put 081609000 to Accept in users file to try this way.
The call reach the telefone but another problem appears due to port is not
send in the request of NAS to freeradius. Thanks! ++[mschap] returns noop
++[digest] returns noop [suffix] No '@' in User-Name = "081609000", looking
up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No
EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry
081609000 at line 71 ++[files] returns ok ++[expiration] returns noop
++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting
to PAP ++[pap] returns noop Found Auth-Type = Accept Auth-Type = Accept,
accepting the user 
Executing section post-auth from file /etc/raddb/sites-enabled/default +-
entering group post-auth {...} ++[exec] returns noop Sending Access-Accept
of id 66 to 212.13.228.58 port 59985 Finished request 3. Going to the next
request Waking up in 4.9 seconds. rad_recv: Accounting-Request packet from
host 212.13.228.58 port 35277, id=3, length=593 User-Name = "081609000"
User-Password = "v7\265\345" Cisco-Attr-130 =
0x683332332d63616c6c696e672d656e74657270726973652d69643d656e74504258
Acct-Multi-Session-Id = "1294648373178" Calling-Station-Id = "81609000"
Called-Station-Id = "38651357952" Cisco-AVPair =
"h323-called-enterprise-id=NexTone" h323-remote-address =
"h323-remote-address=212.13.249.90" Acct-Session-Id = "129464837317821"
h323-conf-id = "h323-conf-id=1294648373178" h323-incoming-conf-id =
"h323-incoming-conf-id=1294648373178" h323-call-origin =
"h323-call-origin=originate" h323-call-type = "h323-call-type=VOIP"
h323-setup-time = "h323-setup-time=08:32:53.182 GMT Mon Jan 10 2011"
Acct-Multi-Session-Id = "1294648373178" h323-connect-time =
"h323-connect-time=08:32:58.924 GMT Mon Jan 10 2011" h323-disconnect-time =
"h323-disconnect-time=08:32:58.934 GMT Mon Jan 10 2011"
h323-disconnect-cause = "h323-disconnect-cause=66" Acct-Status-Type = Stop
Acct-Session-Time = 0 Event-Timestamp = "Jan 10 2011 09:32:58 CET" #
Executing section preacct from file /etc/raddb/sites-enabled/default +-
entering group preacct {...} ++[preprocess] returns ok [acct_unique]
WARNING: Attribute NAS-Port was not found in request, unique ID MAY be
inconsistent [acct_unique] Hashing ',Client-IP-Address =
212.13.228.58,NAS-IP-Address = 212.13.228.58,Acct-Session-Id =
"129464837317821",User-Name = "081609000"' [acct_unique]
Acct-Unique-Session-ID = "d9d5c2ea191e529f". ++[acct_unique] returns ok
[suffix] No '@' in User-Name = "081609000", looking up realm NULL [suffix]
No such realm "NULL" ++[suffix] returns noop ++[files] returns noop 
Executing section accounting from file /etc/raddb/sites-enabled/default +-
entering group accounting {...} [detail] expand:
/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d ->
/var/log/radius/radacct/212.13.228.58/detail-20110110 [detail]
/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to
/var/log/radius/radacct/212.13.228.58/detail-20110110 [detail] expand: %t ->
Mon Jan 10 09:32:58 2011 ++[detail] returns ok ++[unix] returns noop
[radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
[radutmp] expand: %{User-Name} -> 081609000 rlm_radutmp: No NAS-Port seen.
Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work!
++[radutmp] returns noop ++[exec] returns noop
[attr_filter.accounting_response] expand: %{User-Name} -> 081609000
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated Sending
Accounting-Response of id 3 to 212.13.228.58 port 35277 Finished request 4.
Cleaning up request 4 ID 3 with timestamp +13 Going to the next request
Waking up in 4.9 seconds. Cleaning up request 3 ID 66 with timestamp +13
Ready to process requests. 


-- 
View this message in context: http://freeradius.1045715.n5.nabble.com/Voip-database-tp3295546p3334843.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.