freeradius 2.1.10 with oracle instantclient11.2
Alexandre
alxgomz at gmail.com
Fri Jan 14 18:56:06 CET 2011
A workaround for your very own problem could be to change all
references to libnnz10 to libnnz11 in the configure file (in the same
directory).
regards
2011/1/14 Alexandre <alxgomz at gmail.com>:
> personnally I got it working with libtool 1.5 and autoconf 2.61
>
> 2011/1/14 Waqas Toor <waqasnasirtoor at gmail.com>:
>> Dear Alexandre,
>> I am sorry I should have mentioned the env previously ..
>> its CentOS 5.4 64bit
>>
>>
>> if I do ./autogen.sh without applying patch on a clean extract from
>> the tarball it gives the same error.
>>
>> I am not good with libtool and autoconf. can you head me to a
>> direction where i can figure out this or which autoconf and libtool
>> version i need to work this out.
>>
>> Thanks
>>
>> waqas
>>
>>
>>
>>
>>
>> On Fri, Jan 14, 2011 at 10:07 PM, Alexandre <alxgomz at gmail.com> wrote:
>>> Oops the patch is indeed bad.
>>> A bad copy/paste inserted a line break wich mess it up: here is a good
>>> one attached.
>>> sorry for that (unfortunately this won't resolve your issue with
>>> libtool/autoconf or whatever).
>>>
>>> 2011/1/14 Alexandre <alxgomz at gmail.com>:
>>>> The patch should apply flalessly on the 2.1.10 source tree. At least
>>>> it does here. Are you sure you applied it on a clean source trre
>>>> unpacked from the 2.1.10 tarball?
>>>>
>>>> Never the less it seems ,there are autoconf or libtool issues with
>>>> your environement (wich is?).
>>>> Do you have the same error before applying patch?
>>>>
>>>>
>>>> 2011/1/14 Waqas Toor <waqasnasirtoor at gmail.com>:
>>>>> also adding to that,
>>>>> i have manually typed in the changes in the configure.in file as
>>>>> suggested by the patch.
>>>>> when i do autogen.sh
>>>>> i get this error
>>>>>
>>>>> ./autogen.sh
>>>>> Remember to add `AC_PROG_LIBTOOL' to `configure.in'.
>>>>> Using `AC_PROG_RANLIB' is rendered obsolete by `AC_PROG_LIBTOOL'
>>>>> libtoolize: `/usr/share/aclocal/libtool.m4' is serial 48, less than 52
>>>>> in `aclocal.m4'
>>>>> To remain compatible, you should update your `aclocal.m4' by running aclocal.
>>>>> configure.in:1160: warning: AC_CONFIG_SUBDIRS: you should use literals
>>>>> autoconf/status.m4:1077: AC_CONFIG_SUBDIRS is expanded from...
>>>>> configure.in:1160: the top level
>>>>> configure.in:1160: warning: AC_CONFIG_SUBDIRS: you should use literals
>>>>> autoconf/status.m4:1077: AC_CONFIG_SUBDIRS is expanded from...
>>>>> configure.in:1160: the top level
>>>>> configure:19994: error: possibly undefined macro: AC_REQUIRE_AUX_FILE
>>>>> If this token and others are legitimate, please use m4_pattern_allow.
>>>>> See the Autoconf documentation.
>>>>>
>>>>> what could be the reason now?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Jan 14, 2011 at 6:10 PM, Waqas Toor <waqasnasirtoor at gmail.com> wrote:
>>>>>> Hello Alexandre,
>>>>>>
>>>>>> Thanks for the patch
>>>>>> it tried its failing
>>>>>>
>>>>>> here is the error message
>>>>>> [root at aaa-dev freeradius-server-2.1.10]# patch -p0 < oracle.patch
>>>>>> patching file src/modules/rlm_sql/drivers/rlm_sql_oracle/configure.in
>>>>>> Hunk #1 FAILED at 86.
>>>>>> patch: **** malformed patch at line 77:
>>>>>> AC_MSG_RESULT(yes)
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Jan 14, 2011 at 5:56 PM, Alexandre <alxgomz at gmail.com> wrote:
>>>>>>> I wrote this patch which should allow freeradius to correctly detect
>>>>>>> oracle librairies and headers (if you provide the necessary option for
>>>>>>> configure).
>>>>>>> copy it to the top level directory of the sources and patch using
>>>>>>>
>>>>>>> patch -p0 < filename.patch
>>>>>>>
>>>>>>> then re-run ./autogen.sh, then configure, make blahblahblah...
>>>>>>>
>>>>>>> This patch worked for me but I don't think it has ever been tested
>>>>>>> anywhere else. So thanks for feedback :).
>>>>>>>
>>>>>>> regards
>>>>>>>
>>>>>>> HERE IS THE PATCH:
>>>>>>> ##################################
>>>>>>> --- /tmp/configure.in.orig 2010-12-14 23:24:40.019101002 -1000
>>>>>>> +++ src/modules/rlm_sql/drivers/rlm_sql_oracle/configure.in 2010-12-14
>>>>>>> 23:18:25.875101003 -1000
>>>>>>> @@ -86,32 +86,37 @@
>>>>>>> if test "x$oracle_lib_dir" != "x" ; then
>>>>>>> ORACLE_LIBDIR_SWITCH="-L${oracle_lib_dir} "
>>>>>>> fi
>>>>>>> - LIBS="$old_LIBS $ORACLE_LIBDIR_SWITCH -lclntsh -lnnz10"
>>>>>>> - AC_TRY_LINK([#include <oci.h>
>>>>>>> -
>>>>>>> - static OCIEnv *p_env;
>>>>>>> - static OCIError *p_err;
>>>>>>> - static OCISvcCtx *p_svc;
>>>>>>> - static OCIStmt *p_sql;
>>>>>>> - static OCIDefine *p_dfn = (OCIDefine *) 0;
>>>>>>> - static OCIBind *p_bnd = (OCIBind *) 0;
>>>>>>> - ],
>>>>>>> - [
>>>>>>> - int p_bvi;
>>>>>>> - char p_sli[20];
>>>>>>> - int rc;
>>>>>>> - char errbuf[100];
>>>>>>> - int errcode;
>>>>>>> -
>>>>>>> - rc = OCIInitialize((ub4) OCI_DEFAULT, (dvoid *)0, /* Initialize OCI */
>>>>>>> - (dvoid * (*)(dvoid *, size_t)) 0,
>>>>>>> - (dvoid * (*)(dvoid *, dvoid *, size_t))0,
>>>>>>> - (void (*)(dvoid *, dvoid *)) 0 );
>>>>>>> -
>>>>>>> - ],
>>>>>>> - ORACLE_LIBS="$ORACLE_LIBDIR_SWITCH -lclntsh -lnnz10",
>>>>>>> - ORACLE_LIBS=
>>>>>>> - )
>>>>>>> + for oracle_version in 10 11 9 ""; do
>>>>>>> + LIBS="$old_LIBS $ORACLE_LIBDIR_SWITCH -lclntsh -lnnz${oracle_version}"
>>>>>>> + AC_TRY_LINK([#include <oci.h>
>>>>>>> +
>>>>>>> + static OCIEnv *p_env;
>>>>>>> + static OCIError *p_err;
>>>>>>> + static OCISvcCtx *p_svc;
>>>>>>> + static OCIStmt *p_sql;
>>>>>>> + static OCIDefine *p_dfn = (OCIDefine *) 0;
>>>>>>> + static OCIBind *p_bnd = (OCIBind *) 0;
>>>>>>> + ],
>>>>>>> + [
>>>>>>> + int p_bvi;
>>>>>>> + char p_sli[20];
>>>>>>> + int rc;
>>>>>>> + char errbuf[100];
>>>>>>> + int errcode;
>>>>>>> +
>>>>>>> + rc = OCIInitialize((ub4) OCI_DEFAULT, (dvoid *)0, /* Initialize OCI */
>>>>>>> + (dvoid * (*)(dvoid *, size_t)) 0,
>>>>>>> + (dvoid * (*)(dvoid *, dvoid *, size_t))0,
>>>>>>> + (void (*)(dvoid *, dvoid *)) 0 );
>>>>>>> +
>>>>>>> + ],
>>>>>>> + ORACLE_LIBS="$ORACLE_LIBDIR_SWITCH -lclntsh -lnnz${oracle_version}",
>>>>>>> + ORACLE_LIBS=
>>>>>>> + )
>>>>>>> + if test "x$ORACLE_LIBS" != "x"; then
>>>>>>> + break
>>>>>>> + fi
>>>>>>> + done
>>>>>>>
>>>>>>> LIBS="$old_LIBS"
>>>>>>> CFLAGS="$old_CFLAGS"
>>>>>>> @@ -129,7 +134,7 @@
>>>>>>>
>>>>>>> if test "x$ORACLE_LIBS" = "x"; then
>>>>>>> AC_MSG_WARN([oracle libraries not found. Use
>>>>>>> --with-oracle-lib-dir=<path>.])
>>>>>>> - fail="$fail libclntsh libnnz10"
>>>>>>> + fail="$fail libclntsh libnnz${oracle_version}"
>>>>>>> else
>>>>>>> sql_oracle_ldflags="${sql_oracle_ldflags} $ORACLE_LIBS"
>>>>>>> AC_MSG_RESULT(yes)
>>>>>>>
>>>>>>> ##################################
>>>>>>> END OF THE PATCH
>>>>>>>
>>>>>>> 2011/1/14 Waqas Toor <waqasnasirtoor at gmail.com>:
>>>>>>>> Dear Community,
>>>>>>>>
>>>>>>>> I am trying to compile freeradius2.1.10 with oracle instantclient11.2
>>>>>>>> and having problems where it is not detecting oracle libraries and
>>>>>>>> header files. where the oracle home is /opt/instantclient_11_2
>>>>>>>> there are two steps that I am trying and both are failing.
>>>>>>>> a: standard compile
>>>>>>>> # ./configure --with-experimental-modules
>>>>>>>> --with-oracle-include-dir=/opt/instantclient_11_2/sdk/include
>>>>>>>> --with-oracle-lib-dir=/opt/instantclient_11_2
>>>>>>>> --with-oracle-home-dir=/opt/instantclient_11_2
>>>>>>>> and getting this error
>>>>>>>> === configuring in ./drivers/rlm_sql_oracle
>>>>>>>> (/opt/freeradius-server-2.1.10/src/modules/rlm_sql/./drivers/rlm_sql_oracle)
>>>>>>>> configure: running /bin/sh ./configure '--prefix=/usr/local'
>>>>>>>> '--with-experimental-modules'
>>>>>>>> '--with-oracle-include-dir=/opt/instantclient_11_2/sdk/include'
>>>>>>>> '--with-oracle-lib-dir=/opt/instantclient_11_2'
>>>>>>>> '--with-oracle-home-dir=/opt/instantclient_11_2'
>>>>>>>> '--enable-ltdl-install' --cache-file=/dev/null --srcdir=.
>>>>>>>> checking for oci.h... checking for gcc... gcc
>>>>>>>> checking for C compiler default output file name... a.out
>>>>>>>> checking whether the C compiler works... yes
>>>>>>>> checking whether we are cross compiling... no
>>>>>>>> checking for suffix of executables...
>>>>>>>> checking for suffix of object files... o
>>>>>>>> checking whether we are using the GNU C compiler... yes
>>>>>>>> checking whether gcc accepts -g... yes
>>>>>>>> checking for gcc option to accept ISO C89... none needed
>>>>>>>> yes
>>>>>>>> configure: WARNING: oracle libraries not found. Use
>>>>>>>> --with-oracle-lib-dir=<path>.
>>>>>>>> configure: WARNING: silently not building rlm_sql_oracle.
>>>>>>>> configure: WARNING: FAILURE: rlm_sql_oracle requires: libclntsh libnnz10.
>>>>>>>> configure: creating ./config.status
>>>>>>>> config.status: creating Makefile
>>>>>>>>
>>>>>>>> b: in freeradius-server-2.1.10/src/modules/rlm_sql/drivers/rlm_sql_oracle
>>>>>>>> changed the Makefile.in and setting
>>>>>>>> RLM_SQL_CFLAGS = -I/opt/instantclient_11_2/sdk/include $(INCLTDL)
>>>>>>>> RLM_SQL_LIBS = -L/opt/instantclient_11_2
>>>>>>>>
>>>>>>>> and then make.
>>>>>>>>
>>>>>>>> but still getting the error.
>>>>>>>>
>>>>>>>> any pointers .
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Waqas
>>>>>>>> -
>>>>>>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>>>>>>
>>>>>>>
>>>>>>> -
>>>>>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>>>>>
>>>>>>
>>>>>
>>>>> -
>>>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>>>
>>>>
>>>
>>> -
>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>
>>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>
More information about the Freeradius-Users
mailing list