freeradius 2.1.10 with oracle instantclient11.2
Alexandre
alxgomz at gmail.com
Fri Jan 14 21:42:18 CET 2011
Hardcoding libnnz11should be done in configure not in configure.in. and so
there is no need to run. ./autogen.sh
Le 14 janv. 2011 20:19, "Waqas Toor" <waqasnasirtoor at gmail.com> a écrit :
> Dear Alexandre,
>
> Thanks, I have autoconf 2.59
> after patching I had to do
> #aclocal
> # ./autogen.sh
> # ./configure
--with-oracle-include-dir=/opt/instantclient_11_2/sdk/include/
> --with-experimental-modules
> --with-oracle-lib-dir=/opt/instantclient_11_2/
>
> now the error is
> configure: configuring in ./drivers/rlm_sql_oracle
> configure: running /bin/sh './configure' --prefix=/usr/local
> '--prefix=/usr/local'
> '--with-oracle-include-dir=/opt/instantclient_11_2/sdk/include/'
> '--with-experimental-modules'
> '--with-oracle-lib-dir=/opt/instantclient_11_2/'
> '--enable-ltdl-install' '--cache-file=/dev/null' '--srcdir=.'
> --cache-file=/dev/null --srcdir=.
> checking for oci.h... checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> yes
> configure: WARNING: oracle libraries not found. Use
> --with-oracle-lib-dir=<path>.
> configure: WARNING: silently not building rlm_sql_oracle.
> configure: WARNING: FAILURE: rlm_sql_oracle requires: libclntsh libnnz.
> configure: creating ./config.status
> config.status: creating Makefile
>
> please note that is no version in libnnz.
>
> and if I hardcode the version in lnnz11 and libnnz11 in configure.in
> and the again do the above steps then i get this error
>
> configure: configuring in ./drivers/rlm_sql_oracle
> configure: running /bin/sh './configure' --prefix=/usr/local
> '--prefix=/usr/local'
> '--with-oracle-include-dir=/opt/instantclient_11_2/sdk/include/'
> '--with-experimental-modules'
> '--with-oracle-lib-dir=/opt/instantclient_11_2/'
> '--enable-ltdl-install' '--cache-file=/dev/null' '--srcdir=.'
> --cache-file=/dev/null --srcdir=.
> checking for oci.h... checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> yes
> configure: WARNING: oracle libraries not found. Use
> --with-oracle-lib-dir=<path>.
> configure: WARNING: silently not building rlm_sql_oracle.
> configure: WARNING: FAILURE: rlm_sql_oracle requires: libclntsh libnnz11.
>
>
> this oracle thing is becoming pain now :)
>
> Thank you
> Waqas
>
>
>
>
>
>
>
>
> Waqas
>
>
>
>
> On Fri, Jan 14, 2011 at 10:56 PM, Alexandre <alxgomz at gmail.com> wrote:
>> A workaround for your very own problem could be to change all
>> references to libnnz10 to libnnz11 in the configure file (in the same
>> directory).
>>
>> regards
>>
>> 2011/1/14 Alexandre <alxgomz at gmail.com>:
>>> personnally I got it working with libtool 1.5 and autoconf 2.61
>>>
>>> 2011/1/14 Waqas Toor <waqasnasirtoor at gmail.com>:
>>>> Dear Alexandre,
>>>> I am sorry I should have mentioned the env previously ..
>>>> its CentOS 5.4 64bit
>>>>
>>>>
>>>> if I do ./autogen.sh without applying patch on a clean extract from
>>>> the tarball it gives the same error.
>>>>
>>>> I am not good with libtool and autoconf. can you head me to a
>>>> direction where i can figure out this or which autoconf and libtool
>>>> version i need to work this out.
>>>>
>>>> Thanks
>>>>
>>>> waqas
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Jan 14, 2011 at 10:07 PM, Alexandre <alxgomz at gmail.com> wrote:
>>>>> Oops the patch is indeed bad.
>>>>> A bad copy/paste inserted a line break wich mess it up: here is a good
>>>>> one attached.
>>>>> sorry for that (unfortunately this won't resolve your issue with
>>>>> libtool/autoconf or whatever).
>>>>>
>>>>> 2011/1/14 Alexandre <alxgomz at gmail.com>:
>>>>>> The patch should apply flalessly on the 2.1.10 source tree. At least
>>>>>> it does here. Are you sure you applied it on a clean source trre
>>>>>> unpacked from the 2.1.10 tarball?
>>>>>>
>>>>>> Never the less it seems ,there are autoconf or libtool issues with
>>>>>> your environement (wich is?).
>>>>>> Do you have the same error before applying patch?
>>>>>>
>>>>>>
>>>>>> 2011/1/14 Waqas Toor <waqasnasirtoor at gmail.com>:
>>>>>>> also adding to that,
>>>>>>> i have manually typed in the changes in the configure.in file as
>>>>>>> suggested by the patch.
>>>>>>> when i do autogen.sh
>>>>>>> i get this error
>>>>>>>
>>>>>>> ./autogen.sh
>>>>>>> Remember to add `AC_PROG_LIBTOOL' to `configure.in'.
>>>>>>> Using `AC_PROG_RANLIB' is rendered obsolete by `AC_PROG_LIBTOOL'
>>>>>>> libtoolize: `/usr/share/aclocal/libtool.m4' is serial 48, less than
52
>>>>>>> in `aclocal.m4'
>>>>>>> To remain compatible, you should update your `aclocal.m4' by running
aclocal.
>>>>>>> configure.in:1160: warning: AC_CONFIG_SUBDIRS: you should use
literals
>>>>>>> autoconf/status.m4:1077: AC_CONFIG_SUBDIRS is expanded from...
>>>>>>> configure.in:1160: the top level
>>>>>>> configure.in:1160: warning: AC_CONFIG_SUBDIRS: you should use
literals
>>>>>>> autoconf/status.m4:1077: AC_CONFIG_SUBDIRS is expanded from...
>>>>>>> configure.in:1160: the top level
>>>>>>> configure:19994: error: possibly undefined macro:
AC_REQUIRE_AUX_FILE
>>>>>>> If this token and others are legitimate, please use
m4_pattern_allow.
>>>>>>> See the Autoconf documentation.
>>>>>>>
>>>>>>> what could be the reason now?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jan 14, 2011 at 6:10 PM, Waqas Toor <
waqasnasirtoor at gmail.com> wrote:
>>>>>>>> Hello Alexandre,
>>>>>>>>
>>>>>>>> Thanks for the patch
>>>>>>>> it tried its failing
>>>>>>>>
>>>>>>>> here is the error message
>>>>>>>> [root at aaa-dev freeradius-server-2.1.10]# patch -p0 < oracle.patch
>>>>>>>> patching file src/modules/rlm_sql/drivers/rlm_sql_oracle/
configure.in
>>>>>>>> Hunk #1 FAILED at 86.
>>>>>>>> patch: **** malformed patch at line 77:
>>>>>>>> AC_MSG_RESULT(yes)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Jan 14, 2011 at 5:56 PM, Alexandre <alxgomz at gmail.com>
wrote:
>>>>>>>>> I wrote this patch which should allow freeradius to correctly
detect
>>>>>>>>> oracle librairies and headers (if you provide the necessary option
for
>>>>>>>>> configure).
>>>>>>>>> copy it to the top level directory of the sources and patch using
>>>>>>>>>
>>>>>>>>> patch -p0 < filename.patch
>>>>>>>>>
>>>>>>>>> then re-run ./autogen.sh, then configure, make blahblahblah...
>>>>>>>>>
>>>>>>>>> This patch worked for me but I don't think it has ever been tested
>>>>>>>>> anywhere else. So thanks for feedback :).
>>>>>>>>>
>>>>>>>>> regards
>>>>>>>>>
>>>>>>>>> HERE IS THE PATCH:
>>>>>>>>> ##################################
>>>>>>>>> --- /tmp/configure.in.orig 2010-12-14 23:24:40.019101002
-1000
>>>>>>>>> +++ src/modules/rlm_sql/drivers/rlm_sql_oracle/configure.in
2010-12-14
>>>>>>>>> 23:18:25.875101003 -1000
>>>>>>>>> @@ -86,32 +86,37 @@
>>>>>>>>> if test "x$oracle_lib_dir" != "x" ; then
>>>>>>>>> ORACLE_LIBDIR_SWITCH="-L${oracle_lib_dir} "
>>>>>>>>> fi
>>>>>>>>> - LIBS="$old_LIBS $ORACLE_LIBDIR_SWITCH -lclntsh
-lnnz10"
>>>>>>>>> - AC_TRY_LINK([#include <oci.h>
>>>>>>>>> -
>>>>>>>>> - static OCIEnv *p_env;
>>>>>>>>> - static OCIError *p_err;
>>>>>>>>> - static OCISvcCtx *p_svc;
>>>>>>>>> - static OCIStmt *p_sql;
>>>>>>>>> - static OCIDefine *p_dfn
= (OCIDefine *) 0;
>>>>>>>>> - static OCIBind *p_bnd
= (OCIBind *) 0;
>>>>>>>>> - ],
>>>>>>>>> - [
>>>>>>>>> - int p_bvi;
>>>>>>>>> - char p_sli[20];
>>>>>>>>> - int rc;
>>>>>>>>> - char errbuf[100];
>>>>>>>>> - int errcode;
>>>>>>>>> -
>>>>>>>>> - rc = OCIInitialize((ub4)
OCI_DEFAULT, (dvoid *)0, /* Initialize OCI */
>>>>>>>>> - (dvoid * (*)(dvoid *,
size_t)) 0,
>>>>>>>>> - (dvoid * (*)(dvoid *,
dvoid *, size_t))0,
>>>>>>>>> - (void (*)(dvoid *, dvoid
*)) 0 );
>>>>>>>>> -
>>>>>>>>> - ],
>>>>>>>>> - ORACLE_LIBS="$ORACLE_LIBDIR_SWITCH
-lclntsh -lnnz10",
>>>>>>>>> - ORACLE_LIBS=
>>>>>>>>> - )
>>>>>>>>> + for oracle_version in 10 11 9 ""; do
>>>>>>>>> + LIBS="$old_LIBS $ORACLE_LIBDIR_SWITCH
-lclntsh -lnnz${oracle_version}"
>>>>>>>>> + AC_TRY_LINK([#include <oci.h>
>>>>>>>>> +
>>>>>>>>> + static OCIEnv
*p_env;
>>>>>>>>> + static OCIError
*p_err;
>>>>>>>>> + static OCISvcCtx
*p_svc;
>>>>>>>>> + static OCIStmt
*p_sql;
>>>>>>>>> + static OCIDefine
*p_dfn = (OCIDefine *) 0;
>>>>>>>>> + static OCIBind
*p_bnd = (OCIBind *) 0;
>>>>>>>>> + ],
>>>>>>>>> + [
>>>>>>>>> + int p_bvi;
>>>>>>>>> + char
p_sli[20];
>>>>>>>>> + int rc;
>>>>>>>>> + char
errbuf[100];
>>>>>>>>> + int errcode;
>>>>>>>>> +
>>>>>>>>> + rc = OCIInitialize((ub4)
OCI_DEFAULT, (dvoid *)0, /* Initialize OCI */
>>>>>>>>> + (dvoid *
(*)(dvoid *, size_t)) 0,
>>>>>>>>> + (dvoid *
(*)(dvoid *, dvoid *, size_t))0,
>>>>>>>>> + (void
(*)(dvoid *, dvoid *)) 0 );
>>>>>>>>> +
>>>>>>>>> + ],
>>>>>>>>> + ORACLE_LIBS="$ORACLE_LIBDIR_SWITCH
-lclntsh -lnnz${oracle_version}",
>>>>>>>>> + ORACLE_LIBS=
>>>>>>>>> + )
>>>>>>>>> + if test "x$ORACLE_LIBS" != "x"; then
>>>>>>>>> + break
>>>>>>>>> + fi
>>>>>>>>> + done
>>>>>>>>>
>>>>>>>>> LIBS="$old_LIBS"
>>>>>>>>> CFLAGS="$old_CFLAGS"
>>>>>>>>> @@ -129,7 +134,7 @@
>>>>>>>>>
>>>>>>>>> if test "x$ORACLE_LIBS" = "x"; then
>>>>>>>>> AC_MSG_WARN([oracle libraries not found.
Use
>>>>>>>>> --with-oracle-lib-dir=<path>.])
>>>>>>>>> - fail="$fail libclntsh libnnz10"
>>>>>>>>> + fail="$fail libclntsh
libnnz${oracle_version}"
>>>>>>>>> else
>>>>>>>>> sql_oracle_ldflags="${sql_oracle_ldflags}
$ORACLE_LIBS"
>>>>>>>>> AC_MSG_RESULT(yes)
>>>>>>>>>
>>>>>>>>> ##################################
>>>>>>>>> END OF THE PATCH
>>>>>>>>>
>>>>>>>>> 2011/1/14 Waqas Toor <waqasnasirtoor at gmail.com>:
>>>>>>>>>> Dear Community,
>>>>>>>>>>
>>>>>>>>>> I am trying to compile freeradius2.1.10 with oracle
instantclient11.2
>>>>>>>>>> and having problems where it is not detecting oracle libraries
and
>>>>>>>>>> header files. where the oracle home is /opt/instantclient_11_2
>>>>>>>>>> there are two steps that I am trying and both are failing.
>>>>>>>>>> a: standard compile
>>>>>>>>>> # ./configure --with-experimental-modules
>>>>>>>>>> --with-oracle-include-dir=/opt/instantclient_11_2/sdk/include
>>>>>>>>>> --with-oracle-lib-dir=/opt/instantclient_11_2
>>>>>>>>>> --with-oracle-home-dir=/opt/instantclient_11_2
>>>>>>>>>> and getting this error
>>>>>>>>>> === configuring in ./drivers/rlm_sql_oracle
>>>>>>>>>>
(/opt/freeradius-server-2.1.10/src/modules/rlm_sql/./drivers/rlm_sql_oracle)
>>>>>>>>>> configure: running /bin/sh ./configure '--prefix=/usr/local'
>>>>>>>>>> '--with-experimental-modules'
>>>>>>>>>> '--with-oracle-include-dir=/opt/instantclient_11_2/sdk/include'
>>>>>>>>>> '--with-oracle-lib-dir=/opt/instantclient_11_2'
>>>>>>>>>> '--with-oracle-home-dir=/opt/instantclient_11_2'
>>>>>>>>>> '--enable-ltdl-install' --cache-file=/dev/null --srcdir=.
>>>>>>>>>> checking for oci.h... checking for gcc... gcc
>>>>>>>>>> checking for C compiler default output file name... a.out
>>>>>>>>>> checking whether the C compiler works... yes
>>>>>>>>>> checking whether we are cross compiling... no
>>>>>>>>>> checking for suffix of executables...
>>>>>>>>>> checking for suffix of object files... o
>>>>>>>>>> checking whether we are using the GNU C compiler... yes
>>>>>>>>>> checking whether gcc accepts -g... yes
>>>>>>>>>> checking for gcc option to accept ISO C89... none needed
>>>>>>>>>> yes
>>>>>>>>>> configure: WARNING: oracle libraries not found. Use
>>>>>>>>>> --with-oracle-lib-dir=<path>.
>>>>>>>>>> configure: WARNING: silently not building rlm_sql_oracle.
>>>>>>>>>> configure: WARNING: FAILURE: rlm_sql_oracle requires: libclntsh
libnnz10.
>>>>>>>>>> configure: creating ./config.status
>>>>>>>>>> config.status: creating Makefile
>>>>>>>>>>
>>>>>>>>>> b: in
freeradius-server-2.1.10/src/modules/rlm_sql/drivers/rlm_sql_oracle
>>>>>>>>>> changed the Makefile.in and setting
>>>>>>>>>> RLM_SQL_CFLAGS = -I/opt/instantclient_11_2/sdk/include
$(INCLTDL)
>>>>>>>>>> RLM_SQL_LIBS = -L/opt/instantclient_11_2
>>>>>>>>>>
>>>>>>>>>> and then make.
>>>>>>>>>>
>>>>>>>>>> but still getting the error.
>>>>>>>>>>
>>>>>>>>>> any pointers .
>>>>>>>>>>
>>>>>>>>>> Thanks
>>>>>>>>>> Waqas
>>>>>>>>>> -
>>>>>>>>>> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> -
>>>>>>>>> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> -
>>>>>>> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>>>>>>>
>>>>>>
>>>>>
>>>>> -
>>>>> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>>>>>
>>>>
>>>> -
>>>> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>>>>
>>>
>>
>> -
>> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110114/1f748f2a/attachment.html>
More information about the Freeradius-Users
mailing list