Auth-Type fail
Sallee, Stephen (Jake)
Jake.Sallee at umhb.edu
Wed Jul 6 15:56:33 CEST 2011
> ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user
This is probably your culprit. Do you have the SQL module in your authorize and authenticate sections of your config?
Jake Sallee
Godfather of Bandwidth
System Engineer
University of Mary Hardin-Baylor
900 College St.
Belton, Texas
76513
Fone: 254-295-4658
Phax: 254-295-4221
From: freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org [mailto:freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org] On Behalf Of Bastien Semene
Sent: Wednesday, July 06, 2011 8:27 AM
To: freeradius-users at lists.freeradius.org
Subject: Auth-Type fail
Hi list,
I have problem authenticating users against (My)SQL.
Freeradius is running on a FreeBSD 8.0-STABLE and is on version 2.1.10.
It is a fresh install that I made work with the default file authentication.
When I connect the SQL backend, it doesn't work.
I followed the instructions on the FreeRADIUS wiki : http://wiki.freeradius.org/SQl_HOWTO
The SQL module is correctly loaded and it returns an OK during authentication.
The queries are well formed and the results should be ok
What I don't understand is why sql module returns OK, and the authentication is rejected. In my mind, an OK from the SQL module at this step means it has authenticated the user.
Am I misunderstanding ?
The debug output and relevant configuration directives are below.
P.S. : 10.1.8.4 is the IP of the server, I'm running radtest commands from this host (I can't use 127.0.0.1 because of how network currently works in jails on FreeBSD).
Here is the output of the radtest command :
# radtest bsemene test 10.1.8.4 0 "password for jail client"
Sending Access-Request of id 214 to 10.1.8.4 port 1812
User-Name = "bsemene"
User-Password = "test"
NAS-IP-Address = 10.1.8.4
NAS-Port = 0
rad_recv: Access-Reject packet from host 10.1.8.4 port 1812, id=214, length=20
Here is the debug output during authentication :
rad_recv: Access-Request packet from host 10.1.8.4 port 44065, id=138, length=59
User-Name = "bsemene"
User-Password = "test"
NAS-IP-Address = 10.1.8.4
NAS-Port = 0
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "bsemene", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql] expand: %{Stripped-User-Name} ->
[sql] ... expanding second conditional
[sql] expand: %{User-Name} -> bsemene
[sql] expand: %{%{User-Name}:-DEFAULT} -> bsemene
[sql] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> bsemene
[sql] sql_set_user escaped user --> 'bsemene'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, opFROM radcheck WHERE username = BINARY 'bsemene' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHEe = BINARY 'bsemene' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dynamic' ORDER BY id
[sql] User found in group dynamic
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dynamic' ORDER BY id
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> bsemene
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 138 to 10.1.8.4 port 44065
Waking up in 4.9 seconds.
Cleaning up request 0 ID 138 with timestamp +4
Ready to process requests.
Here are the (test) DB datas (sorry for the layout) :
mysql> SELECT * FROM radusergroup;
+----------+-----------+----------+
| username | groupname | priority |
+----------+-----------+----------+
| bsemene | dynamic | 1 |
+----------+-----------+----------+
1 row in set (0.02 sec)
mysql> SELECT * FROM radcheck;
+----+----------+--------------------+----+-------+
| id | username | attribute | op | value |
+----+----------+--------------------+----+-------+
| 1 | bsemene | Cleartext-Password | == | test |
+----+----------+--------------------+----+-------+
1 row in set (0.00 sec)
mysql> SELECT * FROM radreply;
Empty set (0.00 sec)
mysql> SELECT * FROM radgroupreply;
+----+-----------+------------+----+-------+
| id | groupname | attribute | op | value |
+----+-----------+------------+----+-------+
| 1 | dynamic | Framed-MTU | := | 1500 |
+----+-----------+------------+----+-------+
1 row in set (0.02 sec)
Here is the default site config :
# cat sites-available/default | grep -v "^[[:space:]]*#" | grep -v "^$" [root at radius]
authorize {
preprocess
chap
mschap
digest
suffix
eap {
ok = return
}
files
sql
expiration
logintime
pap
}
authenticate {
Auth-Type PAP {
pap
}
Auth-Type CHAP {
chap
}
Auth-Type MS-CHAP {
mschap
}
digest
unix
eap
}
preacct {
preprocess
acct_unique
suffix
files
}
accounting {
detail
unix
radutmp
sql
exec
attr_filter.accounting_response
}
session {
radutmp
}
post-auth {
exec
Post-Auth-Type REJECT {
attr_filter.access_reject
}
}
pre-proxy {
}
post-proxy {
eap
}
And finally the service loading output :
Starting radiusd.
FreeRADIUS Version 2.1.10, for host i386-portbld-freebsd8.0, built on Jun 28 2011 at 16:08:13
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/sql.conf
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/control-socket
main {
user = "freeradius"
group = "freeradius"
allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
prefix = "/usr/local"
localstatedir = "/var"
logdir = "/var/log"
libdir = "/usr/local/lib/freeradius-2.1.10"
radacctdir = "/var/log/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client jail {
ipaddr = 10.1.8.4
require_message_authenticator = no
secret = "password for jail client"
nastype = "other"
}
client WAP1 {
ipaddr = 10.1.8.127
require_message_authenticator = no
secret = "password for remote client"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/ssl/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/certs/server.pem"
certificate_file = "/etc/ssl/certs/server.pem"
CA_file = "/etc/ssl/certs/ca.pem"
private_key_password = "password"
dh_file = "/etc/ssl/certs/dh"
random_file = "/etc/ssl/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/ssl/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server { # from file /usr/local/etc/raddb/radiusd.conf
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /usr/local/etc/raddb/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "ip.of.SQL.server"
port = ""
login = "username"
password = "password"
radius_db = "dbname"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/sqltrace.sql"
readclients = no
deletestalesessions = yes
num_sql_socks = 5
lifetime = 0
max_queries = 0
sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') -
accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}',
accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid,
accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, n
accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start
accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{
accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctsta
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, fra
postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}',
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_<mailto:%22INSERT%20INTO%20radpostauth %20(username,%20pass,%20reply,%20authdate) %20VALUES%20( %20'%25%7bUser-Name%7d',%20%0b %20safe-characters%20=%20%22 at abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_>: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at mysql.it.cyanide-studio.com:/radius<mailto:radius at mysql.it.cyanide-studio.com:/radius>
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail
detail {
detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 10.1.8.4 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
--
Bastien Semene
Administrateur Réseau& Système
Cyanide Studio - FRANCE
--
If you think experts are expensive,
wait to see what amateurs will cost you
--
Bastien Semene
Administrateur Réseau & Système
Cyanide Studio - FRANCE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110706/8848b629/attachment.html>
More information about the Freeradius-Users
mailing list