Renaming during Machine Authentication

Mark Jones Mjones at hpsd48.ab.ca
Mon Jun 6 21:49:10 CEST 2011


I have enabled ldap in the inner-tunnel...here is the lastest debug log (part 1)
 
Mark
 

FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Mar 23 2011 at 11:28:44
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2. 
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/control-socket
main {
 allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
 prefix = "/usr/local"
 localstatedir = "/var"
 logdir = "/var/log/radius"
 libdir = "/usr/local/lib"
 radacctdir = "/var/log/radius/radacct"
 hostname_lookups = no
 max_request_time = 30
 cleanup_delay = 5
 max_requests = 1024
 pidfile = "/var/run/radiusd/radiusd.pid"
 checkrad = "/usr/local/sbin/checkrad"
 debug_level = 0
 proxy_requests = yes
 log {
 stripped_names = no
 auth = no
 auth_badpass = no
 auth_goodpass = no
 }
 security {
 max_attributes = 200
 reject_delay = 1
 status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 retry_delay = 5
 retry_count = 3
 default_fallback = no
 dead_time = 120
 wake_all_if_all_dead = no
 }
 home_server localhost {
 ipaddr = 127.0.0.1
 port = 1812
 type = "auth"
 secret = "testing123"
 response_window = 20
 max_outstanding = 65536
 require_message_authenticator = yes
 zombie_period = 40
 status_check = "status-server"
 ping_interval = 30
 check_interval = 30
 num_answers_to_alive = 3
 num_pings_to_alive = 3
 revive_interval = 120
 status_check_timeout = 4
 irt = 2
 mrt = 16
 mrc = 5
 mrd = 30
 }
 home_server_pool my_auth_failover {
 type = fail-over
 home_server = localhost
 }
 realm example.com {
 auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 ipaddr = 127.0.0.1
 require_message_authenticator = no
 secret = "testing123"
 nastype = "other"
 }
 client 10.152.0.0/13 {
 require_message_authenticator = no
 secret = "centrino"
 shortname = "centrino"
 nastype = "aruba"
 }
 client 10.24.0.0/13 {
 require_message_authenticator = no
 secret = "centrino"
 shortname = "centrino"
 nastype = "aruba"
 }
 client 10.56.0.0/13 {
 require_message_authenticator = no
 secret = "centrino"
 shortname = "centrino"
 nastype = "aruba"
 }
 client 10.32.0.0/13 {
 require_message_authenticator = no
 secret = "centrino"
 shortname = "centrino"
 nastype = "aruba"
 }
 client 10.16.0.0/13 {
 require_message_authenticator = no
 secret = "centrino"
 shortname = "centrino"
 nastype = "aruba"
 }
 client 10.72.0.0/13 {
 require_message_authenticator = no
 secret = "centrino"
 shortname = "centrino"
 nastype = "aruba"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /etc/raddb/modules/exec
  exec {
 wait = no
 input_pairs = "request"
 shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /etc/raddb/modules/expr
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration
  expiration {
 reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime
  logintime {
 reply-message = "You are calling outside your allowed timespan  "
 minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /etc/raddb/modules/pap
  pap {
 encryption_scheme = "auto"
 auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating module "chap" from file /etc/raddb/modules/chap
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
  mschap {
 use_mppe = yes
 require_encryption = no
 require_strong = no
 with_ntdomain_hack = yes
  }
 Module: Linked to module rlm_unix
 Module: Instantiating module "unix" from file /etc/raddb/modules/unix
  unix {
 radwtmp = "/var/log/radius/radwtmp"
  }
 Module: Linked to module rlm_ldap
 Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap
  ldap {
 server = "172.17.152.4"
 port = 636
 password = "xxxxx"
 identity = "cn=admin,o=hpsd_48"
 net_timeout = 1
 timeout = 4
 timelimit = 3
 tls_mode = no
 start_tls = no
 tls_require_cert = "allow"
   tls {
 start_tls = no
 require_cert = "allow"
   }
 basedn = "o=hpsd_48"
 filter = "(uid=%{mschap:User-Name:-%{User-Name}})"
 base_filter = "(objectclass=radiusprofile)"
 password_attribute = "nspmPassword"
 auto_header = no
 access_attr_used_for_allow = yes
 groupname_attribute = "cn"
 groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
 dictionary_mapping = "/etc/raddb/ldap.attrmap"
 ldap_debug = 0
 ldap_connections_number = 5
 compare_check_items = no
 do_xlat = yes
 edir_account_policy_check = yes
 set_auth_type = no
  }
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id
conns: 0x8185770
 Module: Linked to module rlm_eap
 Module: Instantiating module "eap" from file /etc/raddb/eap.conf
  eap {
 default_eap_type = "peap"
 timer_expire = 60
 ignore_unknown_eap_types = no
 cisco_accounting_username_bug = no
 max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
 challenge = "Password: "
 auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
 rsa_key_exchange = no
 dh_key_exchange = yes
 rsa_key_length = 512
 dh_key_length = 512
 verify_depth = 0
 CA_path = "/etc/raddb/certs"
 pem_file_type = yes
 private_key_file = "/etc/raddb/certs/server.pem"
 certificate_file = "/etc/raddb/certs/server.pem"
 CA_file = "/etc/raddb/certs/ca.pem"
 private_key_password = "whatever"
 dh_file = "/etc/raddb/certs/dh"
 random_file = "/etc/raddb/certs/random"
 fragment_size = 1024
 include_length = yes
 check_crl = no
 cipher_list = "DEFAULT"
 make_cert_command = "/etc/raddb/certs/bootstrap"
    cache {
 enable = no
 lifetime = 24
 max_entries = 255
    }
    verify {
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
 default_eap_type = "md5"
 copy_request_to_tunnel = no
 use_tunneled_reply = no
 virtual_server = "inner-tunnel"
 include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
 default_eap_type = "mschapv2"
 copy_request_to_tunnel = no
 use_tunneled_reply = no
 proxy_tunneled_request_as_eap = yes
 virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
 with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
  realm suffix {
 format = "suffix"
 delimiter = "@"
 ignore_default = no
 ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file /etc/raddb/modules/files
  files {
 usersfile = "/etc/raddb/users"
 acctusersfile = "/etc/raddb/acct_users"
 preproxy_usersfile = "/etc/raddb/preproxy_users"
 compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp
  radutmp {
 filename = "/var/log/radius/radutmp"
 username = "%{User-Name}"
 case_sensitive = yes
 check_with_nas = yes
 perm = 384
 callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter
  attr_filter attr_filter.access_reject {
 attrsfile = "/etc/raddb/attrs.access_reject"
 key = "%{User-Name}"
  }
 } # modules
} # server
server { # from file /etc/raddb/radiusd.conf
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_digest
 Module: Instantiating module "digest" from file /etc/raddb/modules/digest
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess
  preprocess {
 huntgroups = "/etc/raddb/huntgroups"
 hints = "/etc/raddb/hints"
 with_ascend_hack = no
 ascend_channels_per_line = 23
 with_ntdomain_hack = no
 with_specialix_jetstream_hack = no
 with_cisco_vsa_hack = no
 with_alvarion_vsa_hack = no
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique
  acct_unique {
 key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating module "detail" from file /etc/raddb/modules/detail
  detail {
 detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 header = "%t"
 detailperm = 384
 dirperm = 493
 locking = no
 log_packet_header = no
  }
 Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter
  attr_filter attr_filter.accounting_response {
 attrsfile = "/etc/raddb/attrs.accounting_response"
 key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
 type = "auth"
 ipaddr = *
 port = 0
}
listen {
 type = "acct"
 ipaddr = *
 port = 0
}
listen {
 type = "control"
 listen {
 socket = "/var/run/radiusd/radiusd.sock"
 }
}
listen {
 type = "auth"
 ipaddr = 127.0.0.1
 port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=181, length=207
 User-Name = "host/TEST-11501.hpsd48.ab.ca"
 NAS-IP-Address = 10.152.0.100
 NAS-Port = 1
 NAS-Identifier = "10.152.0.100"
 NAS-Port-Type = Wireless-802.11
 Calling-Station-Id = "00265EE9B2CA"
 Called-Station-Id = "000B86611894"
 Service-Type = Login-User
 Framed-MTU = 1100
 EAP-Message = 0x0201002101686f73742f544553542d31313530312e6870736434382e61622e6361
 Aruba-Essid-Name = "HPSD_RAD2"
 Aruba-Location-Id = "Tech 01"
 Message-Authenticator = 0xc6fdd5f61d24d6fa10711429844ac704
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 33
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for host/TEST-11501.hpsd48.ab.ca
[ldap]  expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=TEST-11501$)
[ldap]  expand: o=hpsd_48 -> o=hpsd_48
  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] attempting LDAP reconnection
  [ldap] (re)connect to 172.17.152.4:636, authentication 0
  [ldap] setting TLS mode to 1
  [ldap] bind as cn=admin,o=hpsd_48/xxxxx to 172.17.152.4:636
  [ldap] waiting for bind result ...
  [ldap] Bind was successful
  [ldap] performing search in o=hpsd_48, with filter (uid=TEST-11501$)
[ldap] Added the eDirectory password xxxxx in check items as Cleartext-Password
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
[ldap] user host/TEST-11501.hpsd48.ab.ca authorized to use remote access
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set.  Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 181 to 10.152.0.100 port 32819
 EAP-Message = 0x010200061920
 Message-Authenticator = 0x00000000000000000000000000000000
 State = 0x351287c635109e107d0e4bf1d59ff6a4
Finished request 0.

>>> Alan DeKok <aland at deployingradius.com> 6/5/2011 2:18 AM >>>
Mark Jones wrote:
> Ok Im going to try following that guide Monday morning, just one
> question before I get started...does it work with an edir backend and a
> samba server acting as a PDC on an OES2 server?

  Uh... no.  The guide is for getting Active Directory to work.  Active
Directory is not Samba.

  eDir is just an LDAP server.  You've configured it as an LDAP server:

[ldap] expand: o=hpsd_48 -> o=hpsd_48
  [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] performing search in o=hpsd_48, with filter (uid=TEST-11501$)
[ldap] Added the eDirectory password xxxx in check items as
Cleartext-Password
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
[ldap] user host/TEST-11501.hpsd48.ab.ca authorized to use remote access
...

  But you *HAVEN'T* changed the "inner-tunnel" virtual server to use the
LDAP module.  Go read it, and un-comment the line saying "ldap".

  Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

This communication is intended for the use of the recipient to which it is addressed and may contain confidential, personal and/or privileged information. If you received this e-mail in error, please advise me (by return e-mail or otherwise) immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110606/6921fc21/attachment.html>


More information about the Freeradius-Users mailing list