EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL

[xuyu]

Hi ! I meet a ERROR in the test of PEAP
"eapol_test -c peap.txt -s testing123

my peap.txt is
network={
       eap=PEAP
       eapol_flags=0
       key_mgmt=IEEE8021X
       identity="sqluser"
       password="123"
       ca_cert="/usr/local/freeradius/etc/raddb/certs/ca.pem"
       phase2="auth=MSCHAPV2"
       anonymous_identity="anonymous"
}

the result:
RADIUS packet matching with station
decapsulated EAP packet (code=1 id=1 len=6) from RADIUS server:
EAP-Request-PEAP (25)
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=25 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP)
TLS: Phase2 EAP types - hexdump(len=8): 00 00 00 00 1a 00 00 00
TLS: using phase1 config options
TLS: Trusted root certificate(s) loaded
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
EAP: EAP entering state METHOD
SSL: Received packet(len=6) - Flags 0x20
EAP-PEAP: Start (server ver=0, own ver=1)
EAP-PEAP: Using PEAP version 0
SSL: (where=0x10 ret=0x1)
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:before/connect initialization
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client hello A
SSL: (where=0x1002 ret=0xffffffff)
SSL: SSL_connect:error in SSLv3 read server hello A
SSL: SSL_connect - want more data
SSL: 95 bytes pending from ssl_out
SSL: 95 bytes left to be sent out (of total 95 bytes)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp

……

RADIUS packet matching with station
decapsulated EAP packet (code=4 id=8 len=4) from RADIUS server: EAP Failure
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state FAILURE
CTRL-EVENT-EAP-FAILURE EAP authentication failed
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_BE entering state IDLE
eapol_sm_cb: success=0
EAPOL: EAP key not available
EAP: deinitialize previously used EAP method (25, PEAP) at EAP deinit
ENGINE: engine deinit
MPPE keys OK: 0  mismatch: 1
FAILURE

I am a  *freshman ,I do not know how to fix it. *
*THANK YOU!*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110502/d15d5a99/attachment.html>