Alvarion BreezeMAX & 4Motion Service Profiles

Ryan Williams ryan at integritynet.com.au
Mon May 16 05:52:21 CEST 2011


I have a working solution.

For Alvarion to assign service profiles to subscribers through FreeRADIUS
the Filter-Id attribute must be provided in the Access-Accept in the
following format.

Filter-Id = "SP=sp1:MSF=msf1;"
Where sp1 is the name of the pre-configured service profile and msf1 is the
name of the pre-configured multiple service flow profile.

I can confirm that this format works with both the 4Motion and the BreezeMAX
extreme product lines from Alvarion.
Thanks to everyone for your assistance.

-----Original Message-----
From: Ryan Williams [mailto:ryan at integritynet.com.au] 
Sent: Friday, 13 May 2011 11:40 AM
To: 'freeradius-users at lists.freeradius.org'
Subject: Alvarion BreezeMAX & 4Motion Service Profiles

Has anyone been able to get the Alvarion BreezeMAX to apply a service
profile for a subscriber through radius?
or has anyone been able to get debug logging out of the BreezeMAX perhaps
via syslog?

I believe I've got the service interfaces, service groups etc configured the
same in both products.
The BreezeMAX works if I disable RADIUS but doesn't work with the following
radius reply. 

The following access accept works with the Alvarion 4Motion product but not
with the BreezeMAX.

Sending Access-Accept of id 13 to 10.12.15.50 port 49154
        Session-Timeout = 3600
        Termination-Action = RADIUS-Request
        Filter-Id = "SP1"
        EAP-Message = 0x03080004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "{am=1}test at test.com.au"
        WiMAX-MSK =
0x18bffebb46ac2e95ee730b7ecc0eaa5eb4b586fe29e5113f97f1ab794b4405f9d77aaa432c
bb91eb9e4d3ea7e65dded2bb765e18491c62530cf3edee80c644a1




More information about the Freeradius-Users mailing list