AD Authentication + radius + foundryAP
Mark Pipkin
Mark.Pipkin at air2web.com
Mon May 16 21:44:05 CEST 2011
I followed the guide that was linked from http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO because I'm running v2 of the radius server.
After going to the guide I was still unable to authenticate to the AD though the wireless AP controller. This radius is running on Ubuntu 10.04 and is supposed to replace a free radius controller running v1 on Gentoo. The one running on Gentoo is working for the most part, just dies from time to time. So we are just upgrading and refreshing.
For some reason I have not been able to get the radius server to do what I need it to do and that is work with MS-CHAP so that it will authenticate to AD.
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 5 2010 at 02:49:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/rad2/rad2.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = no
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client foundryap {
ipaddr = 192.168.103.10
require_message_authenticator = no
secret = "testing123"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-ATL.EXAMPLE.COM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00} --require-membership-of=ATL+wifi-secure"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/etc/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = yes
}
Module: Instantiating ntdomain
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = yes
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pam
Module: Instantiating pam
pam {
pam_auth = "radiusd"
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating auth_log
detail auth_log {
detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Instantiating detail
detail {
detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 1812
}
listen {
type = "acct"
ipaddr = *
port = 1813
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=83, length=158
User-Name = "ATL\\user"
NAS-IP-Address = 192.168.103.10
NAS-Port = 6145
Called-Station-Id = "00-90-0B-0A-81-96:radtest"
Calling-Station-Id = "00-26-C7-6F-FF-64"
Framed-MTU = 900
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020100110141544c5c7069706b696e5f6d
Message-Authenticator = 0xf18704d104d0322078509df754b74003
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] expand: %t -> Mon May 16 15:28:41 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 1 length 17
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 83 to 192.168.103.10 port 32890
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x880bd1788809c8ca896d5b23fad51f0e
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=84, length=296
User-Name = "ATL\\user"
NAS-IP-Address = 192.168.103.10
NAS-Port = 6145
Called-Station-Id = "00-90-0B-0A-81-96:radtest"
Calling-Station-Id = "00-26-C7-6F-FF-64"
Framed-MTU = 900
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x0202008919800000007f160301007a0100007603014dd17b10f62607c3d64b96e5d9505d0180e01cb5bd8d86d43136a93b0805404a209e83189d67298bccdaa3ebde678430bac0f21f8fc6ae3786aa1efaadf9822f110018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
State = 0x880bd1788809c8ca896d5b23fad51f0e
Message-Authenticator = 0x013e8d6954e859caabbe5767cb033984
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] expand: %t -> Mon May 16 15:28:41 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 2 length 137
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 127
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 007a], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 01c3], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 84 to 192.168.103.10 port 32890
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x3336e1804d16833ff8b416030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x880bd1788908c8ca896d5b23fad51f0e
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=85, length=165
User-Name = "ATL\\user"
NAS-IP-Address = 192.168.103.10
NAS-Port = 6145
Called-Station-Id = "00-90-0B-0A-81-96:radtest"
Calling-Station-Id = "00-26-C7-6F-FF-64"
Framed-MTU = 900
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020300061900
State = 0x880bd1788908c8ca896d5b23fad51f0e
Message-Authenticator = 0xada9d2724210731e12da1c6d2f3f0926
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] expand: %t -> Mon May 16 15:28:41 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 85 to 192.168.103.10 port 32890
EAP-Message = 0x010400061900
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x880bd1788a0fc8ca896d5b23fad51f0e
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED
Waking up in 4.3 seconds.
Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED
Waking up in 3.8 seconds.
Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED
Waking up in 3.6 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=88, length=158
User-Name = "ATL\\user"
NAS-IP-Address = 192.168.103.10
NAS-Port = 6145
Called-Station-Id = "00-90-0B-0A-81-96:radtest"
Calling-Station-Id = "00-26-C7-6F-FF-64"
Framed-MTU = 900
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020100110141544c5c7069706b696e5f6d
Message-Authenticator = 0x26e0f9d13ab7787bf244db77d342326d
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] expand: %t -> Mon May 16 15:28:43 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 1 length 17
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 88 to 192.168.103.10 port 32890
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x457c467c457e5f9ed7afaf432a46c660
Finished request 3.
Going to the next request
Waking up in 3.6 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=89, length=165
User-Name = "ATL\\user"
NAS-IP-Address = 192.168.103.10
NAS-Port = 6145
Called-Station-Id = "00-90-0B-0A-81-96:radtest"
Calling-Station-Id = "00-26-C7-6F-FF-64"
Framed-MTU = 900
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020200060311
State = 0x457c467c457e5f9ed7afaf432a46c660
Message-Authenticator = 0xad2eebc61c93e9f242fc51bf2dafe2c0
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] expand: %t -> Mon May 16 15:28:43 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/leap
[eap] processing type leap
rlm_eap_leap: Stage 2
rlm_eap_leap: Issuing AP Challenge
rlm_eap_leap: Successfully initiated
++[eap] returns handled
Sending Access-Challenge of id 89 to 192.168.103.10 port 32890
EAP-Message = 0x0103001c11010008765dcad2513ca14941544c5c7069706b696e5f6d
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x457c467c447f579ed7afaf432a46c660
Finished request 4.
Going to the next request
Waking up in 3.6 seconds.
rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=90, length=203
User-Name = "ATL\\user"
NAS-IP-Address = 192.168.103.10
NAS-Port = 6145
Called-Station-Id = "00-90-0B-0A-81-96:radtest"
Calling-Station-Id = "00-26-C7-6F-FF-64"
Framed-MTU = 900
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x0203002c1101001887b03ee7af25d8731fec4765958f0f4b0775fd12760ca7a341544c5c7069706b696e5f6d
State = 0x457c467c447f579ed7afaf432a46c660
Message-Authenticator = 0xcc373dbaa966a554c5a5a842877f7fed
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516
[auth_log] expand: %t -> Mon May 16 15:28:43 2011
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
[ntdomain] Looking up realm "ATL" for User-Name = "ATL\user"
[ntdomain] No such realm "ATL"
++[ntdomain] returns noop
[eap] EAP packet type response id 3 length 44
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/leap
[eap] processing type leap
rlm_eap_leap: No Cleartext-Password or NT-Password configured for this user
[eap] Handler failed in EAP/leap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> ATL\user
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 5 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 5
Sending Access-Reject of id 90 to 192.168.103.10 port 32890
EAP-Message = 0x04030004
Message-Authenticator = 0x00000000000000000000000000000000
Flame on!
Seriously though.. I'm going to keep working at this, just didn't know if someone would be able to help me out.
Thanks.
Mark PIpkin
Systems Administrator
Air2Web
Office: +1 404 942 5365
E-mail: mark.pipkin at air2web.com
Mobilize your business.
Find out how at www.air2web.com
Follow us on Twitter @a2wmobile
This message contains privileged and confidential information. If received in error, please delete immediately.
More information about the Freeradius-Users
mailing list