Active directory groups
Doty, Seth
seth.doty at nebraska.gov
Fri May 20 16:14:31 CEST 2011
I must be doing something wrong in my filtering because it keeps dumping
me into unclassified instead of passing the group I assigned. I have
setup a security group specifically for this test and i am indeed in the
group.
I set it up like this in sites-enabled/inner-tunnel because it seemed
this manner was a little more flexible for our needs:
post-auth {
if (Ldap-Group == "CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov") {
update reply {
Filter-Id := networking
}
}
else {
update reply {
Filter-Id := secure-unclassified
}
}
here is my radius -X:
FreeRADIUS Version 2.1.7, for host x86_64-redhat-linux-gnu, built on Mar
31 2010 at 00:14:28
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/ldap.save
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/files
including configuration
file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = no
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 10.200.1.0/24 {
require_message_authenticator = no
secret = "testing321"
shortname = "TestingNetwork"
}
client 10.175.255.11 {
require_message_authenticator = no
secret = "doomkey"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=
%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-STN}
--challenge=%{mschap:Challenge:-00} --nt-response=
%{mschap:NT-Response:-00}"
}
Module: Instantiating ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth --request-nt-key --domain=STN --username=
%{mschap:User-Name} --password=%{User-Password}"
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_ldap
Module: Instantiating ldap
ldap {
server = "AD.ne.gov"
port = 389
password = "XXXXXXXXXX"
identity = "stn\seth.doty"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov"
filter = "(CN=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter = "(&(objectClass=group)(member=
%{Ldap-UserDn}))"
groupmembership_attribute = "memberOf"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
set_auth_type = yes
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed
in the "authenticate" section.
rlm_ldap: reading ldap<->radius mappings from
file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS
Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS
Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS
Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS
Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS
Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0x1f3cc40
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%
d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=237, length=171
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x0202000e01736574682e646f7479
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0x0a5981cd35cccccec08916dd42a81088
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
[ldap] performing user authorization for seth.doty
[ldap] expand: %{Stripped-User-Name} ->
[ldap] expand: %{User-Name} -> seth.doty
[ldap] expand: (CN=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(CN=seth.doty)
[ldap] expand: CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov ->
CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to AD.ne.gov:389, authentication 0
rlm_ldap: bind as stn\seth.doty/XXXXXXXXXX to AD.ne.gov:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in
CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov, with filter (CN=seth.doty)
rlm_ldap: object not found
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns notfound
++[expiration] returns noop
++[logintime] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 237 to 10.175.255.11 port 32794
EAP-Message = 0x0103001604107a6ee0a2d4f6e763d8c1574a0cfc74b1
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129783c71452e59c48c6e32104
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=238, length=181
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020300060319
State = 0x9780c3129783c71452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0xf1a25dd0282fb3e8789fdd1535a883e8
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
[ldap] performing user authorization for seth.doty
[ldap] expand: %{Stripped-User-Name} ->
[ldap] expand: %{User-Name} -> seth.doty
[ldap] expand: (CN=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(CN=seth.doty)
[ldap] expand: CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov ->
CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in
CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov, with filter (CN=seth.doty)
rlm_ldap: object not found
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns notfound
++[expiration] returns noop
++[logintime] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 238 to 10.175.255.11 port 32794
EAP-Message = 0x010400061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129684da1452e59c48c6e32104
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=239, length=329
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x0204009a198000000090160301008b0100008703014dd66ed50762ee33a7976c83e0756515c3ff0a4122274a986df878b78df1dbaa201a0f0000a2009ce306eae11299284ffcaef3f1d8b00911c239ea4ad50e8bd4f0003a00390038008800870035008400160013000a00330032009a009900450044002f00960041000500040015001200090014001100080006000300ff0100000400230000
State = 0x9780c3129684da1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0x7257f430f878922484dfd20a4d3340db
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 154
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 144
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 008b], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
[peap] TLS_accept: SSLv3 write key exchange A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 239 to 10.175.255.11 port 32794
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0xd60004ab308204a73082038f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129585da1452e59c48c6e32104
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=240, length=181
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020500061900
State = 0x9780c3129585da1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0x441273cb354ca32d27b088777c92f92c
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 240 to 10.175.255.11 port 32794
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0xab093a6369691c7f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129486da1452e59c48c6e32104
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=241, length=181
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020600061900
State = 0x9780c3129486da1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0xc41800b8f9423e2c1cb0e0211f015223
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 241 to 10.175.255.11 port 32794
EAP-Message =
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
EAP-Message =
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
EAP-Message =
0x187851f1cc89c646eb38751c6288c891b07ed01d7d888fb2d50d153517f854c9114504088092dcd2c32faba168e66f59b51dc4e718e96618019789c33a4ef2ad76929d8c6fc945710aa350c22dce3f21fc81a2023eaf0ae906fc748dc2e47e2c5894eb49a6f206a3d326438fc8b7bde52f9675f8f1594a350bc040495fd96e46317e760d3d7d879ecc4d16602095e442262defbc9e63ee0dc28c491eaad9a8b310f1262c982faf8840a5f5ef377e61a8b0632b58f17ad6f4c900c13661549f5143f48a1f65ef4e6ca37c8e16030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129387da1452e59c48c6e32104
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=242, length=383
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x020700d01980000000c616030100861000008200802107622ebf4b8c5e63e4520592841ea7d4b52fd0ded2de0c70b7102e112455b3f03bd63f3ef0698f373d6769f891aedd9a745f2c52c85f3460031c3c873013c8b8ec7cbb65dbc7421bde06575e73193afbaf37f56abf6de0008dd11fae7d2f0c5543ae5223426ff7c7629345e550398fc6c73720654ef83e7e3106822315c2fc1403010001011603010030fb8d5afaf87b62d13d80b6e7121b59458c56b273735d0ba915104b608ade2e4ff2420e9055bcad9f8524104ad5205faa
State = 0x9780c3129387da1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0x61ca90433840534121034f7e04373532
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 208
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 198
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
[peap] TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap] TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 write finished A
[peap] TLS_accept: SSLv3 flush data
[peap] (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 242 to 10.175.255.11 port 32794
EAP-Message =
0x01080041190014030100010116030100306e78d4a3fbc91bee1e1d5d532e0d3972f792abab0a29cc96e47d1b9db8576c9df490e8d5bc9692995826b8bce70f77fb
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129288da1452e59c48c6e32104
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=243, length=181
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020800061900
State = 0x9780c3129288da1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0xe3c222fec06228e6c36609c8e43e8117
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 243 to 10.175.255.11 port 32794
EAP-Message =
0x0109002b1900170301002026d6755b4b91f4b56e47ccb8af04efb3f5064beeb03dd375e1a737fe69b97f7e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129189da1452e59c48c6e32104
Finished request 6.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=244, length=255
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x02090050190017030100202a153e005d218c64bac4c6ae60a4a47ae0b7eb863a243ae455402455c8d1a0da1703010020e05e87b384eb1cf4b7dfcf67aba1a804182ab45e8ec023c90a97af98d5d774c5
State = 0x9780c3129189da1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0x609e26344fc806d31db36b5a883c6da2
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Identity - seth.doty
[peap] Got tunneled request
EAP-Message = 0x0209000e01736574682e646f7479
server {
PEAP: Got tunneled identity of seth.doty
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to seth.doty
Sending tunneled request
EAP-Message = 0x0209000e01736574682e646f7479
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "seth.doty"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 9 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
EAP-Message =
0x010a00231a010a001e10d6b726f89e7c1dc2455dcb969bffefb1736574682e646f7479
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc020639cc02a799f2402da1e2bf686a2
[peap] Got tunneled reply RADIUS code 11
EAP-Message =
0x010a00231a010a001e10d6b726f89e7c1dc2455dcb969bffefb1736574682e646f7479
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc020639cc02a799f2402da1e2bf686a2
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 244 to 10.175.255.11 port 32794
EAP-Message =
0x010a004b190017030100404b9e4baea80d1d20ab90eeab01cf3501d752cbd5549687f3922f255fe49c5ca0fd2cc0bebf23656ddce51502dd83713f5748451cdcfe245ef8ba92e2a4741811
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c312908ada1452e59c48c6e32104
Finished request 7.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=245, length=319
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x020a0090190017030100208c10c1ba2871d2d5e20afef609ddcf4d74fecb1af44a5e8b96d13b04b9f098481703010060468f6eb13698dd642845884bade0b9281b10ec721e078fa0b360fe5a9c0f7a571dfb8ab1ff5d4c8520bd15a7eac8f904428537ed2e897f4f1355f2572d45b3832296cda77b86b38e7625e8b79df1caa1a564b22bc0d4fb655a54a532dd4387c4
State = 0x9780c312908ada1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0xe1dac00b193956d298b5db160cbe61c4
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 10 length 144
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunneled request
EAP-Message =
0x020a00441a020a003f3180cd1ba748241f27f3b6d138e34e5022000000000000000020d0bdcfe838860d435e92ce6dee7d6ee83a61639f30852600736574682e646f7479
server {
PEAP: Setting User-Name to seth.doty
Sending tunneled request
EAP-Message =
0x020a00441a020a003f3180cd1ba748241f27f3b6d138e34e5022000000000000000020d0bdcfe838860d435e92ce6dee7d6ee83a61639f30852600736574682e646f7479
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "seth.doty"
State = 0xc020639cc02a799f2402da1e2bf686a2
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 10 length 68
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] Told to do MS-CHAPv2 for seth.doty with NT-Password
[mschap] expand: --username=%{mschap:User-Name:-None} ->
--username=seth.doty
[mschap] No NT-Domain was found in the User-Name.
[mschap] expand: %{mschap:NT-Domain} ->
[mschap] expand: --domain=%{%{mschap:NT-Domain}:-STN} -> --domain=STN
[mschap] mschap2: d6
[mschap] expand: --challenge=%{mschap:Challenge:-00} ->
--challenge=48fb695c32de49e3
[mschap] expand: --nt-response=%{mschap:NT-Response:-00} ->
--nt-response=20d0bdcfe838860d435e92ce6dee7d6ee83a61639f308526
Exec-Program output: NT_KEY: 7D06A715A9FD45DB57D634E70486CDEB
Exec-Program-Wait: plaintext: NT_KEY: 7D06A715A9FD45DB57D634E70486CDEB
Exec-Program: returned: 0
[mschap] adding MS-CHAPv2 MPPE keys
++[mschap] returns ok
MSCHAP Success
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
EAP-Message =
0x010b00331a030a002e533d46334433334145443433344541303143313836434644343539464337424130373636464339444638
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc020639cc12b799f2402da1e2bf686a2
[peap] Got tunneled reply RADIUS code 11
EAP-Message =
0x010b00331a030a002e533d46334433334145443433344541303143313836434644343539464337424130373636464339444638
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc020639cc12b799f2402da1e2bf686a2
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 245 to 10.175.255.11 port 32794
EAP-Message =
0x010b005b1900170301005024162ce85f39c2256bf2754dc6ffe339f37849a4f2bb127618172a0b431aa09821f11a0547dd875555bd24498706bb0375123e584219ee9678b993363cac4b343b5c428ce257d4275349df839762572b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129f8bda1452e59c48c6e32104
Finished request 8.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=246, length=255
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x020b005019001703010020f46c4aa9b900c096bbe02e439cca2ee2bc60aa24eeb2913dcf7a08178e21d46d1703010020551fbf04f9dc4dedbf509014d6153eb6a11ede632045982a84af03243bf94b45
State = 0x9780c3129f8bda1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0x74a755dd934383272d0713bb75b75851
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 11 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunneled request
EAP-Message = 0x020b00061a03
server {
PEAP: Setting User-Name to seth.doty
Sending tunneled request
EAP-Message = 0x020b00061a03
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "seth.doty"
State = 0xc020639cc12b799f2402da1e2bf686a2
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 11 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[eap] Freeing handler
++[eap] returns ok
+- entering group post-auth {...}
++? if (Ldap-Group == "CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov")
rlm_ldap: Entering ldap_groupcmp()
expand: CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov ->
CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov
expand: %{Stripped-User-Name} ->
expand: %{User-Name} -> seth.doty
expand: (CN=%{%{Stripped-User-Name}:-%{User-Name}}) -> (CN=seth.doty)
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in
CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov, with filter (CN=seth.doty)
rlm_ldap: object not found
rlm_ldap::ldap_groupcmp: search failed
rlm_ldap: ldap_release_conn: Release Id: 0
? Evaluating (Ldap-Group == "CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov") -> FALSE
++? if (Ldap-Group == "CN=STNE_Wireless_Authentication,ou=Security
Groups,ou=test,ou=test,dc=AD,dc=ne,dc=gov") -> FALSE
++- entering else else {...}
+++[reply] returns noop
++- else else returns noop
} # server inner-tunnel
[peap] Got tunneled reply code 2
EAP-Message = 0x030b0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "seth.doty"
Filter-Id = "secure-unclassified"
[peap] Got tunneled reply RADIUS code 2
EAP-Message = 0x030b0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "seth.doty"
Filter-Id = "secure-unclassified"
[peap] Tunneled authentication was successful.
[peap] SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 246 to 10.175.255.11 port 32794
EAP-Message =
0x010c002b1900170301002056502beade5135038021ed5d2f0d10e78a91e501c5d58a96af0fcdb3310726fc
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x9780c3129e8cda1452e59c48c6e32104
Finished request 9.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 10.175.255.11 port 32794,
id=247, length=255
User-Name = "seth.doty"
NAS-IP-Address = 10.200.3.252
NAS-Port = 0
NAS-Identifier = "10.200.3.252"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "C417FE62A790"
Called-Station-Id = "000B8661628C"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x020c0050190017030100208011c6fbb25eeb4e04454b45afc64844f4781f5599cd67c45edf61c5820f03f21703010020c5bf37365af4f1c5dd2bda857e262cd94c871bfce6454aa1c643cf2fe1343630
State = 0x9780c3129e8cda1452e59c48c6e32104
Aruba-Essid-Name = "NEW_TEST"
Aruba-Location-Id = "test-ap-41"
Message-Authenticator = 0xc3017bd2df835a35b048be614209c833
+- entering group authorize {...}
++[preprocess] returns ok
++[mschap] returns noop
[suffix] No '@' in User-Name = "seth.doty", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 12 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Received EAP-TLV response.
[peap] Success
[eap] Freeing handler
++[eap] returns ok
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 247 to 10.175.255.11 port 32794
MS-MPPE-Recv-Key =
0x250a9d4675dee09162bf7de49a5a94f97186120e1cc8448f2fcfc134b7a1323e
MS-MPPE-Send-Key =
0xab393dc3cdf464673e9189ccb1910bb3469472970ab4c92f6d5ccd4eb102efa4
EAP-Message = 0x030c0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "seth.doty"
Finished request 10.
Going to the next request
Waking up in 4.8 seconds.
Cleaning up request 0 ID 237 with timestamp +246
Cleaning up request 1 ID 238 with timestamp +246
Cleaning up request 2 ID 239 with timestamp +246
Cleaning up request 3 ID 240 with timestamp +246
Cleaning up request 4 ID 241 with timestamp +246
Cleaning up request 5 ID 242 with timestamp +246
Cleaning up request 6 ID 243 with timestamp +246
Cleaning up request 7 ID 244 with timestamp +246
Cleaning up request 8 ID 245 with timestamp +246
Cleaning up request 9 ID 246 with timestamp +246
Cleaning up request 10 ID 247 with timestamp +246
Ready to process requests.
More information about the Freeradius-Users
mailing list