Radius Over a NAT

[Esdras Caleb Oliveira Silva]

The aps are over a private network(NAT) and the Radius server is on a
public network(it have a true ip).
I retrived the log file but it did not show me anything usefull.
Any ideias of what i must do?

On Tue, Nov 8, 2011 at 3:16 PM, Tim Sylvester <
tim.sylvester at networkradius.com> wrote:

> > My APs are all over a NAT and the radius server is outside this nat. How
> i
> > configure the clients.conf to acept the conections from the APs?
>
> It depends. If the NAT device statically maps the AP's IP address to a
> dedicated NATed IP address, then you can add the Aps NATed IP addresses to
> clients.conf. If the NAT device dynamically assigns a NATed IP address to
> the AP and/or shares NATed IP addresses with multiple APs, then you have a
> problem.
>
> Tim
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-- 

"Não se VAI à Igreja. Se É Igreja<http://www.youtube.com/watch?v=ifnJtkAnBq4>
."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20111109/0cd6ae3d/attachment.html>