Dynamic Attributes Based on NAS Type !

[Stefan A.]

Norbert,

 

sorry, but you are taking a sledgehammer to crack the nut.

If you read it ‚one of the ideas of having different virtual servers is
separation of policies for different NASses’ you are right.

 

Suman was asking on how to send several NASses into the same policy.

 

Regards

Stefan

 

 

From: freeradius-users-bounces+a.freeradius=premit.de at lists.freeradius.org
[mailto:freeradius-users-bounces+a.freeradius=premit.de at lists.freeradius.org
] On Behalf Of Wegener, Norbert
Sent: Saturday, October 08, 2011 8:02 PM
To: FreeRadius users mailing list
Subject: AW: Dynamic Attributes Based on NAS Type !

 

The general idea is to setup a virtual server for each type of NAS and make
sure, that every NAS is loaded into the correct virtual server. 

 

With best regards,

  _____  

Norbert Wegener

Siemens IT Solutions and Services
AIS MS NC PSU SDC
Bruchstraße 5
45883 Gelsenkirchen, Germany
Tel.: +49 (209) 94565716
Fax: +49 (201) 8165581284
mailto:norbert.wegener at atos.net


Atos IT Solutions and Services GmbH; Geschäftsführung: Winfried Holz,
Christian Oecking, Rainer-Christian Koppitz; Vorsitzender des Aufsichtsrats:
Charles Dehelly; Sitz der Gesellschaft: München, Deutschland;
Registergericht: München, HRB 184933.  

  _____  

Von: freeradius-users-bounces+norbert.wegener=atos.net at lists.freeradius.org
[freeradius-users-bounces+norbert.wegener=atos.net at lists.freeradius.org]" im
Auftrag von "Suman Dash [sumandash at gmail.com]
Gesendet: Samstag, 8. Oktober 2011 16:39
Bis: FreeRadius users mailing list
Betreff: Dynamic Attributes Based on NAS Type !

Hi Everyone ... Currently i am planning to integrate freeradius with
different NAS like Chillispot , Cisco etc and enable roaming users so that
they can log in from any of the NAS. 

As the reply items are different with different NAS , i am looking for ideas
how to enable a single user to roam and connect from different NAS.

In my case i think static reply items are not possible per user wise or per
groupwise so my question is what trick can be used to achieve the same.

I had not tried anything as i have no clue on the same so some highlights on
the approach will be a good starting point for me.

Cheers
Suman



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20111009/b38dba6b/attachment.html>