Freeradius + Fedora-DS + EAP-MSCHAPv2 for WIFI/AP authentication
Commonn Systems
admin at commonn.com
Tue Sep 20 06:05:57 CEST 2011
If you are in an AD environment, and only deal with domain computers,
there is no limitations at all + you don't need to write a program
neither. Group Policy does everything for you. You can distribute the
certificate via GPO, you can send out the Wireless profiles via GPO, and
even configure Single Sign On .... All of that totally transparent to
the user.
The certificate issue is like a double sword, I like it when I go
through the logs and see that someone tried to connect to the AP, but
fails because his own machine rejected the certificate .... Even if the
students decide to share their credentials, it might not work if they
use Windows machines. If you want to go that way, you can also
configure Windows supplicant to ignore the certificate, or just warn the
user and let him decide .... Lots of options ....
On 9/19/2011 8:10 PM, Christ Schlacta wrote:
> I thought if you had a certificate signed by a trusted root CA, you
> were good and didn't need to install anything on the client.
>
> I don't have my server certificate installed on my windows clients,
> only my CA certificate. if I chose to use verisign, I wouldn't have
> needed to do that, but I would have needed to verisign ALL of my
> client certificates (I use wpa2-eap-tls).
>
> On 9/19/2011 16:15, Sallee, Stephen (Jake) wrote:
>> If I understand your question correctly you want to use FR to
>> authenticate users against a Microsoft AD server, that the clients
>> themselves are windows based or not is not altogether too important.
>>
>> If this is indeed what you are trying to do, is there any reason you
>> are not able to use NTLM? It makes the actual authentication portion
>> VERY easy, you can then do any fancy stuff with LDAP searches for
>> group memberships, etc. knowing that the user IS an authenticated
>> user. NTLM will allow your users to do PEAP/MSCHAPv2 authentication,
>> the catch is that they need to have the cert for the FR server
>> installed OR do some manual tweaking of the interface. We worked
>> around this by writing a simple program to install the server cert
>> and configure the wifi interface for the user.
>>
>> The cert issue is a limitation of Windows NOT FR! MS claims it is
>> for security reasons, but in truth it is just a foolish blunder. 3rd
>> party supplicants will do the trick but they area pain to deploy to
>> assets that you do not manage. Long story short: on Windows, there
>> is NO way to use PEAP/MSCHAPv2 (or indeed any cert based auth
>> method) without installing the server cert or manually tweaking the
>> interface config, or using a less broken supplicant ... sorry.
>>
>> If someone can prove me wrong, please, please, PLEASE, tell me, this
>> has been a huge pain for us!
>>
>> Jake Sallee
>> Godfather of Bandwidth
>> System Engineer
>> University of Mary Hardin-Baylor
>> 900 College St.
>> Belton, Texas
>> 76513
>> Fone: 254-295-4658
>> Phax: 254-295-4221
>>
>> -----Original Message-----
>> From:
>> freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org
>> [mailto:freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org]
>> On Behalf Of uselessidbr
>> Sent: Monday, September 19, 2011 5:19 PM
>> To: freeradius-users at lists.freeradius.org
>> Subject: Freeradius + Fedora-DS + EAP-MSCHAPv2 for WIFI/AP
>> authentication
>>
>> Hello.
>>
>> People, i've read a lot about the WIFI/AP authentication over Freeradius
>> using LDAP but it seems i cannot make it work unless i use clear-text
>> password or Nt/Lmpassword which as far as i know implies in Samba + LDAP
>> integration.
>>
>> My question is, is that really the only way to make freeradius
>> authenticate
>> users using a LDAP database?
>>
>> Do i need to have samba + ldap to authenticate WIFI users using
>> freeradius +
>> LDAP with EAP-MSCHAPv2?
>>
>> If so, is there any other solution to authenticate Windows WIFI users
>> without using a 3rd party wifi supplicant?
>>
>> Definetely, theres no other way i can use freeradius and fedora-ds
>> without
>> Samba/clear-text password OR a 3rd party supplicant that supports
>> EAP/PAP?
>>
>> With my current configuration i was able to authenticate LDAP users with
>> clear-text password but thats not i really want as a WIFI authentication
>> solution. My goal is to use freeradius to authenticate WIFI users
>> using a
>> LDAP database and without the need of use a non-native Windows
>> application.
>>
>>
>> Here goes my debug using a encrypted user password (which fails):
>>
>> *FreeRADIUS Version 2.1.10, for host x86_64-redhat-linux-gnu, built
>> on Mar
>> 25 2011 at 10:54:38
>> Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE.
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License v2.
>> Starting - reading configuration files ...
>> including configuration file /etc/raddb/radiusd.conf
>> including configuration file /etc/raddb/proxy.conf
>> including configuration file /etc/raddb/clients.conf
>> including files in directory /etc/raddb/modules/
>> including configuration file /etc/raddb/modules/pap
>> including configuration file /etc/raddb/modules/mac2vlan
>> including configuration file /etc/raddb/modules/sradutmp
>> including configuration file /etc/raddb/modules/pam
>> including configuration file /etc/raddb/modules/exec
>> including configuration file /etc/raddb/modules/radutmp
>> including configuration file /etc/raddb/modules/mschap
>> including configuration file /etc/raddb/modules/ldap
>> including configuration file /etc/raddb/modules/ippool
>> including configuration file /etc/raddb/modules/wimax
>> including configuration file /etc/raddb/modules/smbpasswd
>> including configuration file /etc/raddb/modules/attr_filter
>> including configuration file /etc/raddb/modules/realm
>> including configuration file /etc/raddb/modules/detail.log
>> including configuration file /etc/raddb/modules/passwd
>> including configuration file /etc/raddb/modules/perl
>> including configuration file /etc/raddb/modules/inner-eap
>> including configuration file /etc/raddb/modules/ntlm_auth
>> including configuration file /etc/raddb/modules/sql_log
>> including configuration file /etc/raddb/modules/dynamic_clients
>> including configuration file /etc/raddb/modules/otp
>> including configuration file /etc/raddb/modules/cui
>> including configuration file /etc/raddb/modules/expiration
>> including configuration file /etc/raddb/modules/opendirectory
>> including configuration file /etc/raddb/modules/unix
>> including configuration file /etc/raddb/modules/attr_rewrite
>> including configuration file /etc/raddb/modules/linelog
>> including configuration file /etc/raddb/modules/checkval
>> including configuration file /etc/raddb/modules/detail.example.com
>> including configuration file /etc/raddb/modules/policy
>> including configuration file /etc/raddb/modules/acct_unique
>> including configuration file /etc/raddb/modules/chap
>> including configuration file /etc/raddb/modules/expr
>> including configuration file /etc/raddb/modules/smsotp
>> including configuration file /etc/raddb/modules/logintime
>> including configuration file
>> /etc/raddb/modules/sqlcounter_expire_on_login
>> including configuration file /etc/raddb/modules/etc_group
>> including configuration file /etc/raddb/modules/always
>> including configuration file /etc/raddb/modules/mac2ip
>> including configuration file /etc/raddb/modules/counter
>> including configuration file /etc/raddb/modules/preprocess
>> including configuration file /etc/raddb/modules/echo
>> including configuration file /etc/raddb/modules/digest
>> including configuration file /etc/raddb/modules/files
>> including configuration file /etc/raddb/modules/detail
>> including configuration file /etc/raddb/eap.conf
>> including configuration file /etc/raddb/policy.conf
>> including files in directory /etc/raddb/sites-enabled/
>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>> including configuration file /etc/raddb/sites-enabled/default
>> including configuration file /etc/raddb/sites-enabled/control-socket
>> main {
>> user = "radiusd"
>> group = "radiusd"
>> allow_core_dumps = no
>> }
>> including dictionary file /etc/raddb/dictionary
>> main {
>> prefix = "/usr"
>> localstatedir = "/var"
>> logdir = "/var/log/radius"
>> libdir = "/usr/lib64/freeradius"
>> radacctdir = "/var/log/radius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 1024
>> pidfile = "/var/run/radiusd/radiusd.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = yes
>> log {
>> stripped_names = no
>> auth = no
>> auth_badpass = no
>> auth_goodpass = no
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = "testing123"
>> response_window = 20
>> max_outstanding = 65536
>> require_message_authenticator = yes
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> num_answers_to_alive = 3
>> num_pings_to_alive = 3
>> revive_interval = 120
>> status_check_timeout = 4
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> realm mydomain {
>> authhost = LOCAL
>> accthost = LOCAL
>> }
>> realm host {
>> authhost = LOCAL
>> accthost = LOCAL
>> }
>> realm teste {
>> authhost = LOCAL
>> accthost = LOCAL
>> }
>> radiusd: #### Loading Clients ####
>> client localhost {
>> ipaddr = 127.0.0.1
>> require_message_authenticator = no
>> secret = "testing123"
>> nastype = "other"
>> }
>> client 10.10.10.1 {
>> require_message_authenticator = no
>> secret = "password"
>> shortname = "AP1"
>> }
>> client 10.10.10.2 {
>> require_message_authenticator = no
>> secret = "password"
>> shortname = "AP2"
>> }
>>
>> radiusd: #### Instantiating modules ####
>> instantiate {
>> Module: Linked to module rlm_exec
>> Module: Instantiating module "exec" from file /etc/raddb/modules/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> }
>> Module: Linked to module rlm_expr
>> Module: Instantiating module "expr" from file /etc/raddb/modules/expr
>> Module: Linked to module rlm_expiration
>> Module: Instantiating module "expiration" from file
>> /etc/raddb/modules/expiration
>> expiration {
>> reply-message = "Password Has Expired "
>> }
>> Module: Linked to module rlm_logintime
>> Module: Instantiating module "logintime" from file
>> /etc/raddb/modules/logintime
>> logintime {
>> reply-message = "You are calling outside your allowed timespan "
>> minimum-timeout = 60
>> }
>> }
>> radiusd: #### Loading Virtual Servers ####
>> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>> modules {
>> Module: Checking authenticate {...} for more modules to load
>> Module: Linked to module rlm_pap
>> Module: Instantiating module "pap" from file /etc/raddb/modules/pap
>> pap {
>> encryption_scheme = "auto"
>> auto_header = no
>> }
>> Module: Linked to module rlm_chap
>> Module: Instantiating module "chap" from file /etc/raddb/modules/chap
>> Module: Linked to module rlm_mschap
>> Module: Instantiating module "mschap" from file
>> /etc/raddb/modules/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = no
>> require_strong = no
>> with_ntdomain_hack = yes
>> }
>> Module: Linked to module rlm_unix
>> Module: Instantiating module "unix" from file /etc/raddb/modules/unix
>> unix {
>> radwtmp = "/var/log/radius/radwtmp"
>> }
>> Module: Linked to module rlm_ldap
>> Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap
>> ldap {
>> server = "10.10.10.15"
>> port = 389
>> password = "mypassword"
>> identity = "cn=user,dc=domain"
>> net_timeout = 1
>> timeout = 4
>> timelimit = 3
>> tls_mode = no
>> start_tls = no
>> tls_require_cert = "allow"
>> tls {
>> start_tls = no
>> cacertfile = "/etc/raddb/cacert.pem"
>> cacertdir = "/etc/raddb/"
>> certfile = "/etc/raddb/server.pem"
>> keyfile = "/etc/raddb/certs/server.key"
>> randfile = "/dev/urandom"
>> require_cert = "allow"
>> }
>> basedn = "ou=User,dc=domain"
>> filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
>> base_filter = "(objectclass=radiusprofile)"
>> password_attribute = "userPassword"
>> auto_header = no
>> access_attr_used_for_allow = yes
>> groupname_attribute = "cn"
>> groupmembership_filter =
>> "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
>>
>> dictionary_mapping = "/etc/raddb/ldap.attrmap"
>> ldap_debug = 0
>> ldap_connections_number = 5
>> compare_check_items = no
>> do_xlat = yes
>> set_auth_type = yes
>> }
>> rlm_ldap: Registering ldap_groupcmp for Ldap-Group
>> rlm_ldap: Registering ldap_xlat with xlat_name ldap
>> rlm_ldap: reading ldap<->radius mappings from file
>> /etc/raddb/ldap.attrmap
>> rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
>> rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
>> rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
>> rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
>> rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
>> rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS
>> Calling-Station-Id
>> rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
>> rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
>> rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
>> rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
>> rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
>> rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
>> rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
>> rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
>> rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
>> rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
>> rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
>> rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
>> rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
>> rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
>> rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
>> rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
>> rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
>> rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS
>> Framed-Compression
>> rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
>> rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
>> rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
>> rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
>> rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
>> rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS
>> Framed-IPX-Network
>> rlm_ldap: LDAP radiusClass mapped to RADIUS Class
>> rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
>> rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
>> rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS
>> Termination-Action
>> rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
>> rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
>> rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
>> rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
>> Framed-AppleTalk-Link
>> rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
>> Framed-AppleTalk-Network
>> rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
>> Framed-AppleTalk-Zone
>> rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
>> rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
>> rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
>> rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
>> rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS
>> Tunnel-Medium-Type
>> rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
>> Tunnel-Private-Group-Id
>> conns: 0x7fbe6f08c1d0
>> Module: Linked to module rlm_eap
>> Module: Instantiating module "eap" from file /etc/raddb/eap.conf
>> eap {
>> default_eap_type = "peap"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> cisco_accounting_username_bug = no
>> max_sessions = 4096
>> }
>> Module: Linked to sub-module rlm_eap_md5
>> Module: Instantiating eap-md5
>> Module: Linked to sub-module rlm_eap_leap
>> Module: Instantiating eap-leap
>> Module: Linked to sub-module rlm_eap_gtc
>> Module: Instantiating eap-gtc
>> gtc {
>> challenge = "Password: "
>> auth_type = "PAP"
>> }
>> Module: Linked to sub-module rlm_eap_tls
>> Module: Instantiating eap-tls
>> tls {
>> rsa_key_exchange = no
>> dh_key_exchange = yes
>> rsa_key_length = 512
>> dh_key_length = 512
>> verify_depth = 0
>> CA_path = "/etc/raddb/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/raddb/certs/server.key"
>> certificate_file = "/etc/raddb/certs/server.pem"
>> CA_file = "/etc/raddb/certs/ca.pem"
>> private_key_password = "password"
>> dh_file = "/etc/raddb/certs/dh"
>> random_file = "/dev/urandom"
>> fragment_size = 1024
>> include_length = yes
>> check_crl = no
>> cipher_list = "DEFAULT"
>> cache {
>> enable = no
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> }
>> }
>> Module: Linked to sub-module rlm_eap_ttls
>> Module: Instantiating eap-ttls
>> ttls {
>> default_eap_type = "md5"
>> copy_request_to_tunnel = yes
>> use_tunneled_reply = no
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> }
>> Module: Linked to sub-module rlm_eap_peap
>> Module: Instantiating eap-peap
>> peap {
>> default_eap_type = "mschapv2"
>> copy_request_to_tunnel = yes
>> use_tunneled_reply = yes
>> proxy_tunneled_request_as_eap = yes
>> virtual_server = "inner-tunnel"
>> }
>> Module: Linked to sub-module rlm_eap_mschapv2
>> Module: Instantiating eap-mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> }
>> Module: Checking authorize {...} for more modules to load
>> Module: Linked to module rlm_realm
>> Module: Instantiating module "IPASS" from file
>> /etc/raddb/modules/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> Module: Instantiating module "suffix" from file
>> /etc/raddb/modules/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> Module: Instantiating module "ntdomain" from file
>> /etc/raddb/modules/realm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\"
>> ignore_default = no
>> ignore_null = no
>> }
>> Module: Linked to module rlm_files
>> Module: Instantiating module "files" from file
>> /etc/raddb/modules/files
>> files {
>> usersfile = "/etc/raddb/users"
>> acctusersfile = "/etc/raddb/acct_users"
>> preproxy_usersfile = "/etc/raddb/preproxy_users"
>> compat = "no"
>> }
>> Module: Checking session {...} for more modules to load
>> Module: Linked to module rlm_radutmp
>> Module: Instantiating module "radutmp" from file
>> /etc/raddb/modules/radutmp
>> radutmp {
>> filename = "/var/log/radius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> perm = 384
>> callerid = yes
>> }
>> Module: Checking post-proxy {...} for more modules to load
>> Module: Checking post-auth {...} for more modules to load
>> Module: Linked to module rlm_attr_filter
>> Module: Instantiating module "attr_filter.access_reject" from file
>> /etc/raddb/modules/attr_filter
>> attr_filter attr_filter.access_reject {
>> attrsfile = "/etc/raddb/attrs.access_reject"
>> key = "%{User-Name}"
>> }
>> } # modules
>> } # server
>> server { # from file /etc/raddb/radiusd.conf
>> modules {
>> Module: Checking authenticate {...} for more modules to load
>> Module: Linked to module rlm_digest
>> Module: Instantiating module "digest" from file
>> /etc/raddb/modules/digest
>> Module: Checking authorize {...} for more modules to load
>> Module: Linked to module rlm_preprocess
>> Module: Instantiating module "preprocess" from file
>> /etc/raddb/modules/preprocess
>> preprocess {
>> huntgroups = "/etc/raddb/huntgroups"
>> hints = "/etc/raddb/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> Module: Checking preacct {...} for more modules to load
>> Module: Linked to module rlm_acct_unique
>> Module: Instantiating module "acct_unique" from file
>> /etc/raddb/modules/acct_unique
>> acct_unique {
>> key = "User-Name, Acct-Session-Id, NAS-IP-Address,
>> Client-IP-Address,
>> NAS-Port"
>> }
>> Module: Checking accounting {...} for more modules to load
>> Module: Linked to module rlm_detail
>> Module: Instantiating module "detail" from file
>> /etc/raddb/modules/detail
>> detail {
>> detailfile =
>> "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
>> header = "%t"
>> detailperm = 384
>> dirperm = 493
>> locking = no
>> log_packet_header = no
>> }
>> Module: Instantiating module "attr_filter.accounting_response" from
>> file
>> /etc/raddb/modules/attr_filter
>> attr_filter attr_filter.accounting_response {
>> attrsfile = "/etc/raddb/attrs.accounting_response"
>> key = "%{User-Name}"
>> }
>> Module: Checking session {...} for more modules to load
>> Module: Checking post-proxy {...} for more modules to load
>> Module: Checking post-auth {...} for more modules to load
>> } # modules
>> } # server
>> radiusd: #### Opening IP addresses and Ports ####
>> listen {
>> type = "auth"
>> ipaddr = *
>> port = 0
>> }
>> listen {
>> type = "acct"
>> ipaddr = *
>> port = 0
>> }
>> listen {
>> type = "control"
>> listen {
>> socket = "/var/run/radiusd/radiusd.sock"
>> }
>> }
>> listen {
>> type = "auth"
>> ipaddr = 127.0.0.1
>> port = 18120
>> }
>> Listening on authentication address * port 1812
>> Listening on accounting address * port 1813
>> Listening on command file /var/run/radiusd/radiusd.sock
>> Listening on authentication address 127.0.0.1 port 18120 as server
>> inner-tunnel
>> Listening on proxy address * port 1814
>> Ready to process requests.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=214
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message = 0x0200000b01746573746532
>> Message-Authenticator = 0xcd3cde11fdb9c9e173401a1ab63137d0
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 0 length 11
>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>> ++[eap] returns updated
>> ++[files] returns noop
>> [ldap] performing user authorization for teste2
>> [ldap] expand: %{Stripped-User-Name} ->
>> [ldap] ... expanding second conditional
>> [ldap] expand: %{User-Name} -> teste2
>> [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
>> (uid=teste2)
>> [ldap] expand: ou=Users,dc=domain -> ou=Users,dc=domain
>> [ldap] ldap_get_conn: Checking Id: 0
>> [ldap] ldap_get_conn: Got Id: 0
>> [ldap] attempting LDAP reconnection
>> [ldap] (re)connect to 10.10.10.15:389, authentication 0
>> [ldap] setting TLS CACert File to /etc/raddb/cacert.pem
>> [ldap] setting TLS CACert Directory to /etc/raddb/
>> [ldap] setting TLS Cert File to /etc/raddb/server.pem
>> [ldap] setting TLS Key File to /etc/raddb/certs/server.key
>> [ldap] setting TLS Key File to /dev/urandom
>> [ldap] bind as cn=user,dc=domain/password to 10.10.10.15:389
>> [ldap] waiting for bind result ...
>> [ldap] Bind was successful
>> [ldap] performing search in ou=Users,dc=domain, with filter
>> (uid=teste2)
>> [ldap] Added User-Password = {SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk= in check
>> items
>> [ldap] looking for check items in directory...
>> [ldap] userPassword -> Password-With-Header ==
>> "{SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk="
>> [ldap] looking for reply items in directory...
>> [ldap] user teste2 authorized to use remote access
>> [ldap] ldap_release_conn: Release Id: 0
>> ++[ldap] returns ok
>> ++[expiration] returns noop
>> ++[logintime] returns noop
>> [pap] WARNING: Auth-Type already set. Not setting to PAP
>> ++[pap] returns noop
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] EAP Identity
>> [eap] processing type tls
>> [tls] Initiate
>> [tls] Start returned 1
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message = 0x010100061920
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f7c48bb76be870fae22db0ee
>> Finished request 0.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=326
>> Cleaning up request 0 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f7c48bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message =
>> 0x0201006919800000005f160301005a0100005603014e77ac4ef302031ce6cf78b5efa69c7b099159b307be6b4012f60c9ce315c67a000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
>>
>> State = 0xf7c592a0f7c48bb76be870fae22db0ee
>> Message-Authenticator = 0xcc0f4382d29993c82ea7d5f28d83ec6d
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 1 length 105
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> TLS Length 95
>> [peap] Length Included
>> [peap] eaptls_verify returned 11
>> [peap] (other): before/accept initialization
>> [peap] TLS_accept: before/accept initialization
>> [peap]<<< TLS 1.0 Handshake [length 005a], ClientHello
>> [peap] TLS_accept: SSLv3 read client hello A
>> [peap]>>> TLS 1.0 Handshake [length 0031], ServerHello
>> [peap] TLS_accept: SSLv3 write server hello A
>> [peap]>>> TLS 1.0 Handshake [length 084e], Certificate
>> [peap] TLS_accept: SSLv3 write certificate A
>> [peap]>>> TLS 1.0 Handshake [length 0004], ServerHelloDone
>> [peap] TLS_accept: SSLv3 write server done A
>> [peap] TLS_accept: SSLv3 flush data
>> [peap] TLS_accept: Need to read more data: SSLv3 read client
>> certificate
>> A
>> In SSL Handshake Phase
>> In SSL Accept mode
>> [peap] eaptls_process returned 13
>> [peap] EAPTLS_HANDLED
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 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
>>
>> EAP-Message =
>> 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
>>
>> EAP-Message =
>> 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
>>
>> EAP-Message =
>> 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
>>
>> EAP-Message = 0x0389a003020102020900e0c2
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f6c78bb76be870fae22db0ee
>> Finished request 1.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=227
>> Cleaning up request 1 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f6c78bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message = 0x020200061900
>> State = 0xf7c592a0f6c78bb76be870fae22db0ee
>> Message-Authenticator = 0x841c3e3abcb3dae6bd7e27170021ad46
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 2 length 6
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> [peap] Received TLS ACK
>> [peap] ACK handshake fragment handler
>> [peap] eaptls_verify returned 1
>> [peap] eaptls_process returned 13
>> [peap] EAPTLS_HANDLED
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 0x010303fc19404e91650fc6bd300d06092a864886f70d0101050500308191310b3009060355040613024252311730150603550408130e53616e7461204361746172696e61311630140603550407130d466c6f7269616e6f706f6c697331163014060355040a130d53697374656d612046494553433123302106092a864886f70d01090116146775737461766f764073632e73656e61692e6272311430120603550403130b7261646975732d6c646170301e170d3131303931363138313231335a170d3131313131353138313231335a308191310b3009060355040613024252311730150603550408130e53616e7461204361746172696e613116301406
>>
>> EAP-Message =
>> 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
>>
>> EAP-Message =
>> 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
>>
>> EAP-Message =
>> 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
>>
>> EAP-Message = 0x80dc01dc76af44cc
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f5c68bb76be870fae22db0ee
>> Finished request 2.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=227
>> Cleaning up request 2 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f5c68bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message = 0x020300061900
>> State = 0xf7c592a0f5c68bb76be870fae22db0ee
>> Message-Authenticator = 0x0a39b42d7de2a7b38ed8cf7b807d341c
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 3 length 6
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> [peap] Received TLS ACK
>> [peap] ACK handshake fragment handler
>> [peap] eaptls_verify returned 1
>> [peap] eaptls_process returned 13
>> [peap] EAPTLS_HANDLED
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 0x010400ac1900952b3388d9fc8a18902a7ca2464057045b225266793cad184508c644fc450b67d8d016c13e1a97223a5527ed1dd363c511abe6d9e39ea657cf521efa4088ec8560b1fb3bc99c16291861233ee7991f1190ff7ad5dceda93c0806e1d53fd3a51f26ea62917bf1129cd8cf3641e8bfa4578aaf5b05faef5dbe70f444573b7771bcaccffcb6dcb83f3c4219f8a51e65b18379a9a234940a859e6796bbc39816030100040e000000
>>
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f4c18bb76be870fae22db0ee
>> Finished request 3.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=559
>> Cleaning up request 3 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f4c18bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message =
>> 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
>>
>> EAP-Message =
>> 0x023c90c2eaa483212cd56dee5f2eb41ce20867c910eac4920114030100010116030100302bdb38b496d679466f1893edff2f8eb093624b411c47368c13c583a737d0bec2f68dd3e7d53b98d27dfbc986248cb05f
>>
>> State = 0xf7c592a0f4c18bb76be870fae22db0ee
>> Message-Authenticator = 0xa522fecab2ac7eca750166755205bf27
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 4 length 252
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> TLS Length 326
>> [peap] Length Included
>> [peap] eaptls_verify returned 11
>> [peap]<<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
>> [peap] TLS_accept: SSLv3 read client key exchange A
>> [peap]<<< TLS 1.0 ChangeCipherSpec [length 0001]
>> [peap]<<< TLS 1.0 Handshake [length 0010], Finished
>> [peap] TLS_accept: SSLv3 read finished A
>> [peap]>>> TLS 1.0 ChangeCipherSpec [length 0001]
>> [peap] TLS_accept: SSLv3 write change cipher spec A
>> [peap]>>> TLS 1.0 Handshake [length 0010], Finished
>> [peap] TLS_accept: SSLv3 write finished A
>> [peap] TLS_accept: SSLv3 flush data
>> [peap] (other): SSL negotiation finished successfully
>> SSL Connection Established
>> [peap] eaptls_process returned 13
>> [peap] EAPTLS_HANDLED
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 0x0105004119001403010001011603010030d1e5dba0e82d06aa0efc4287843d8208d124a58d449a582c793dc50977fc3d0b85c0aef80bfc5e004d93ae6ce60d0ed5
>>
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f3c08bb76be870fae22db0ee
>> Finished request 4.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=227
>> Cleaning up request 4 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f3c08bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message = 0x020500061900
>> State = 0xf7c592a0f3c08bb76be870fae22db0ee
>> Message-Authenticator = 0x0b80ba1e60a27eeb5eb41f1458465a19
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 5 length 6
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> [peap] Received TLS ACK
>> [peap] ACK handshake is finished
>> [peap] eaptls_verify returned 3
>> [peap] eaptls_process returned 3
>> [peap] EAPTLS_SUCCESS
>> [peap] Session established. Decoding tunneled attributes.
>> [peap] Peap state TUNNEL ESTABLISHED
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 0x0106002b190017030100205764f8ef2b3b7d310fa296587d149cb2a3f7ed99b582d06f9083773de55dc14d
>>
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f2c38bb76be870fae22db0ee
>> Finished request 5.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=264
>> Cleaning up request 5 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f2c38bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message =
>> 0x0206002b190017030100207dea7432b1b04d11512baf1695f76ff6b7b9ce4b2b3ae758c52da2236bbfc395
>>
>> State = 0xf7c592a0f2c38bb76be870fae22db0ee
>> Message-Authenticator = 0x85cf9261aac6080e4048a0b9d23c7176
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 6 length 43
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> [peap] eaptls_verify returned 7
>> [peap] Done initial handshake
>> [peap] eaptls_process returned 7
>> [peap] EAPTLS_OK
>> [peap] Session established. Decoding tunneled attributes.
>> [peap] Peap state WAITING FOR INNER IDENTITY
>> [peap] Identity - teste2
>> [peap] Got inner identity 'teste2'
>> [peap] Setting default EAP type for tunneled EAP session.
>> [peap] Got tunneled request
>> EAP-Message = 0x0206000b01746573746532
>> server {
>> PEAP: Setting User-Name to teste2
>> Sending tunneled request
>> EAP-Message = 0x0206000b01746573746532
>> FreeRADIUS-Proxied-To = 127.0.0.1
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> server inner-tunnel {
>> # Executing section authorize from file
>> /etc/raddb/sites-enabled/inner-tunnel
>> +- entering group authorize {...}
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> ++[control] returns noop
>> [eap] EAP packet type response id 6 length 11
>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>> ++[eap] returns updated
>> ++[files] returns noop
>> [ldap] performing user authorization for teste2
>> [ldap] expand: %{Stripped-User-Name} ->
>> [ldap] ... expanding second conditional
>> [ldap] expand: %{User-Name} -> teste2
>> [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
>> (uid=teste2)
>> [ldap] expand: ou=Users,dc=domain -> ou=Users,dc=domain
>> [ldap] ldap_get_conn: Checking Id: 0
>> [ldap] ldap_get_conn: Got Id: 0
>> [ldap] performing search in ou=Users,dc=domain, with filter
>> (uid=teste2)
>> [ldap] Added User-Password = {SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk= in check
>> items
>> [ldap] looking for check items in directory...
>> [ldap] userPassword -> Password-With-Header ==
>> "{SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk="
>> [ldap] looking for reply items in directory...
>> [ldap] user teste2 authorized to use remote access
>> [ldap] ldap_release_conn: Release Id: 0
>> ++[ldap] returns ok
>> ++[expiration] returns noop
>> ++[logintime] returns noop
>> [pap] WARNING: Auth-Type already set. Not setting to PAP
>> ++[pap] returns noop
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
>> +- entering group authenticate {...}
>> [eap] EAP Identity
>> [eap] processing type mschapv2
>> rlm_eap_mschapv2: Issuing Challenge
>> ++[eap] returns handled
>> } # server inner-tunnel
>> [peap] Got tunneled reply code 11
>> EAP-Message =
>> 0x010700201a0107001b103a5115f773349150b9b5946cfbff32d0746573746532
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xbe0fa53abe08bf4800211b259017b493
>> [peap] Got tunneled reply RADIUS code 11
>> EAP-Message =
>> 0x010700201a0107001b103a5115f773349150b9b5946cfbff32d0746573746532
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xbe0fa53abe08bf4800211b259017b493
>> [peap] Got tunneled Access-Challenge
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 0x0107004b1900170301004042ba4c5209794b623511eacc7f0bb8ee3e5bb95842822987291efd1f421464113439a4b10135432498834418ec8a98a86a81aa45f7acfe3832bbb6f8322e7977
>>
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f1c28bb76be870fae22db0ee
>> Finished request 6.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=328
>> Cleaning up request 6 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f1c28bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message =
>> 0x0207006b1900170301006081c9d132cfa04368529dade57d67641e7fd3b378acac26d660c7a84c45a8f53ad96d366b40632a6fa8edaf935b809d4470016bde67708bbb5c33faa93f9a7f7df7e87f30fb963c0bd4c0e435206f2e235c56100377c8acba97ab332b6b7cff4e
>>
>> State = 0xf7c592a0f1c28bb76be870fae22db0ee
>> Message-Authenticator = 0xca3d17d60332ac20951db7bde6f666a0
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 7 length 107
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> [peap] eaptls_verify returned 7
>> [peap] Done initial handshake
>> [peap] eaptls_process returned 7
>> [peap] EAPTLS_OK
>> [peap] Session established. Decoding tunneled attributes.
>> [peap] Peap state phase2
>> [peap] EAP type mschapv2
>> [peap] Got tunneled request
>> EAP-Message =
>> 0x020700411a0207003c3166967fb6fe3977d049f2c9bc6916ed8c000000000000000088e0c96ae4e8b5f451d108eff34d695a452a9b67e1348db400746573746532
>>
>> server {
>> PEAP: Setting User-Name to teste2
>> Sending tunneled request
>> EAP-Message =
>> 0x020700411a0207003c3166967fb6fe3977d049f2c9bc6916ed8c000000000000000088e0c96ae4e8b5f451d108eff34d695a452a9b67e1348db400746573746532
>>
>> FreeRADIUS-Proxied-To = 127.0.0.1
>> User-Name = "teste2"
>> State = 0xbe0fa53abe08bf4800211b259017b493
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> server inner-tunnel {
>> # Executing section authorize from file
>> /etc/raddb/sites-enabled/inner-tunnel
>> +- entering group authorize {...}
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> ++[control] returns noop
>> [eap] EAP packet type response id 7 length 65
>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>> ++[eap] returns updated
>> ++[files] returns noop
>> [ldap] performing user authorization for teste2
>> [ldap] expand: %{Stripped-User-Name} ->
>> [ldap] ... expanding second conditional
>> [ldap] expand: %{User-Name} -> teste2
>> [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
>> (uid=teste2)
>> [ldap] expand: ou=Users,dc=domain -> ou=Users,dc=domain
>> [ldap] ldap_get_conn: Checking Id: 0
>> [ldap] ldap_get_conn: Got Id: 0
>> [ldap] performing search in ou=Users,dc=domain, with filter
>> (uid=teste2)
>> [ldap] Added User-Password = {SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk= in check
>> items
>> [ldap] looking for check items in directory...
>> [ldap] userPassword -> Password-With-Header ==
>> "{SHA}lqYsqYvex/VTQ/jPpZQ3m9unbMk="
>> [ldap] looking for reply items in directory...
>> [ldap] user teste2 authorized to use remote access
>> [ldap] ldap_release_conn: Release Id: 0
>> ++[ldap] returns ok
>> ++[expiration] returns noop
>> ++[logintime] returns noop
>> [pap] WARNING: Auth-Type already set. Not setting to PAP
>> ++[pap] returns noop
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/mschapv2
>> [eap] processing type mschapv2
>> [mschapv2] # Executing group from file
>> /etc/raddb/sites-enabled/inner-tunnel
>> [mschapv2] +- entering group MS-CHAP {...}
>> [mschap] No Cleartext-Password configured. Cannot create LM-Password.
>> [mschap] No Cleartext-Password configured. Cannot create NT-Password.
>> [mschap] Creating challenge hash with username: teste2
>> [mschap] Told to do MS-CHAPv2 for teste2 with NT-Password
>> [mschap] FAILED: No NT/LM-Password. Cannot perform authentication.
>> [mschap] FAILED: MS-CHAP2-Response is incorrect
>> ++[mschap] returns reject
>> [eap] Freeing handler
>> ++[eap] returns reject
>> Failed to authenticate the user.
>> } # server inner-tunnel
>> [peap] Got tunneled reply code 3
>> MS-CHAP-Error = "\007E=691 R=1"
>> EAP-Message = 0x04070004
>> Message-Authenticator = 0x00000000000000000000000000000000
>> [peap] Got tunneled reply RADIUS code 3
>> MS-CHAP-Error = "\007E=691 R=1"
>> EAP-Message = 0x04070004
>> Message-Authenticator = 0x00000000000000000000000000000000
>> [peap] Tunneled authentication was rejected.
>> [peap] FAILURE
>> ++[eap] returns handled
>> Sending Access-Challenge of id 254 to 10.10.10.1 port 42873
>> EAP-Message =
>> 0x0108002b190017030100201e991601faad6e17dbd36948aaa0ffa54bab24d9694a5f874f454b3c9068678f
>>
>> Message-Authenticator = 0x00000000000000000000000000000000
>> State = 0xf7c592a0f0cd8bb76be870fae22db0ee
>> Finished request 7.
>> Going to the next request
>> Waking up in 4.9 seconds.
>> rad_recv: Access-Request packet from host 10.10.10.1 port 42873, id=254,
>> length=264
>> Cleaning up request 7 ID 254 with timestamp +15
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> WARNING: !! EAP session for state 0xf7c592a0f0cd8bb7 did not finish!
>> WARNING: !! Please read
>> http://wiki.freeradius.org/Certificate_Compatibility
>> WARNING:
>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>> User-Name = "teste2"
>> NAS-IP-Address = 10.10.10.2
>> NAS-Port = 51
>> Framed-MTU = 1400
>> Called-Station-Id = "00:04:96:32:c1:bd"
>> Calling-Station-Id = "74:f0:6d:0a:ce:4f"
>> NAS-Port-Type = Wireless-802.11
>> NAS-Identifier = "teste"
>> Extreme-Attr-3 = 0x31303030303038303144303831323937
>> Extreme-Attr-2 = 0x544943
>> Extreme-Attr-4 = 0x7465737465
>> Extreme-Attr-5 = 0x7465737465
>> Extreme-Attr-6 = 0x30303a30343a39363a33323a63313a6264
>> EAP-Message =
>> 0x0208002b190017030100200f24e2e08569178721784c13cfa2fed7b033940f2b653d7616966358be7e87eb
>>
>> State = 0xf7c592a0f0cd8bb76be870fae22db0ee
>> Message-Authenticator = 0x775b3a54b6f3809cbff7365813a3ae59
>> # Executing section authorize from file /etc/raddb/sites-enabled/default
>> +- entering group authorize {...}
>> ++[preprocess] returns ok
>> ++[chap] returns noop
>> ++[mschap] returns noop
>> ++[digest] returns noop
>> [IPASS] No '/' in User-Name = "teste2", looking up realm NULL
>> [IPASS] No such realm "NULL"
>> ++[IPASS] returns noop
>> [suffix] No '@' in User-Name = "teste2", looking up realm NULL
>> [suffix] No such realm "NULL"
>> ++[suffix] returns noop
>> [ntdomain] No '\' in User-Name = "teste2", looking up realm NULL
>> [ntdomain] No such realm "NULL"
>> ++[ntdomain] returns noop
>> [eap] EAP packet type response id 8 length 43
>> [eap] Continuing tunnel setup.
>> ++[eap] returns ok
>> Found Auth-Type = EAP
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group authenticate {...}
>> [eap] Request found, released from the list
>> [eap] EAP/peap
>> [eap] processing type peap
>> [peap] processing EAP-TLS
>> [peap] eaptls_verify returned 7
>> [peap] Done initial handshake
>> [peap] eaptls_process returned 7
>> [peap] EAPTLS_OK
>> [peap] Session established. Decoding tunneled attributes.
>> [peap] Peap state send tlv failure
>> [peap] Received EAP-TLV response.
>> [peap] The users session was previously rejected: returning reject
>> (again.)
>> [peap] *** This means you need to read the PREVIOUS messages in the
>> debug
>> output
>> [peap] *** to find out the reason why the user was rejected.
>> [peap] *** Look for "reject" or "fail". Those earlier messages will
>> tell
>> you.
>> [peap] *** what went wrong, and how to fix the problem.
>> [eap] Handler failed in EAP/peap
>> [eap] Failed in EAP select
>> ++[eap] returns invalid
>> Failed to authenticate the user.
>> Using Post-Auth-Type Reject
>> # Executing group from file /etc/raddb/sites-enabled/default
>> +- entering group REJECT {...}
>> [attr_filter.access_reject] expand: %{User-Name} -> teste2
>> attr_filter: Matched entry DEFAULT at line 11
>> ++[attr_filter.access_reject] returns updated
>> Delaying reject of request 8 for 1 seconds
>> Going to the next request
>> Waking up in 0.9 seconds.
>> Sending delayed reject for request 8
>> Sending Access-Reject of id 254 to 10.10.10.1 port 42873
>> EAP-Message = 0x04080004
>> Message-Authenticator = 0x00000000000000000000000000000000
>> Waking up in 4.9 seconds.*
>>
>>
>> Thanks in advance,
>> Gustavo.
>>
>> --
>> View this message in context:
>> http://freeradius.1045715.n5.nabble.com/Freeradius-Fedora-DS-EAP-MSCHAPv2-for-WIFI-AP-authentication-tp4820687p4820687.html
>> Sent from the FreeRadius - User mailing list archive at Nabble.com.
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list