Access Accept

[Miha Zoubek]

@Alexandre,

I have one more question.

I am looking at this post post-auth { } section.
I can see that the values are not added to attributes in access-accept. 
For example:

  Module: Checking post-auth {...} for more modules to load
/etc/raddb/sites-enabled/default[460]: ERROR: Failed to find IP address 
for %{request:NAS-IP-Address}
/etc/raddb/sites-enabled/default[456]: Errors parsing post-auth section.

if I look in access-reqest section (I have comment 
%{request:NAS-IP-Address}):

Ready to process requests.
rad_recv: Access-Request packet from host xxx.xxx.xxx.xxx port 40239, 
id=140, length=206
         Acct-Multi-Session-Id = "1317025759333"
         Cisco-Attr-130 = 
0x683332332d63616c6c696e672d656e74657270726973652d69643d656e74504258
         Calling-Station-Id = "81609000"
         NAS-Identifier = "intraswitch"
         NAS-IP-Address = xxx.xxx.xxx.xxx
         3GPP2-Prepaid-acct-Capability = 0x010600000002
         3GPP2-Session-Termination-Capability = 1
         h323-conf-id = "h323-conf-id=1317025759333"
         Vendor-Specific = 0x00000009
         Event-Timestamp = "Sep 26 2011 10:29:19 CEST"
         User-Name = "081609000"
         User-Password = "1122"

I can see that the ip from NAS is send. If I have this line written 
(NAS-IP-Address = %{request:NAS-IP-Address}) the radius will not start.
Should this be add the any other section then post-auth {...}?
BR,
MIha

On 9/24/2011 2:43 PM, Alexandre Chapellon wrote:
> Le 23/09/2011 22:01, Miha a écrit :
>> Hi @Alexandre,
>>
>> here is a copy from me default file:
>>
>> post-auth {
>>          #  Get an address from the IP Pool.
>> #       main_pool
>> update reply {
>>          3GPP2-Prepaid-acct-Capability =
>> %{request:3GPP2-Prepaid-acct-Capability}
>>
>> }
>>
>>    update reply {
>>            Acct-Multi-Session-Id = %{request:Acct-Multi-Session-Id}
>>
>> }
> IIRC I use double quotedvariables in my config. Anyway, this is odd it 
> happens for the second attributes and not the first one.
>
>> I have also try this way, but still the same:
>>
>> update reply {
>>          3GPP2-Prepaid-acct-Capability =
>> %{request:3GPP2-Prepaid-acct-Capability}
>>          Acct-Multi-Session-Id = %{request:Acct-Multi-Session-Id}
>>
>> }
> This sounds better.
>> I do not see any problem with quotes.
>>
>> Thank you!
>>
>> Br,
>> Miha
>>
>>
>> --
>> View this message in context:http://freeradius.1045715.n5.nabble.com/Access-Accept-tp4832711p4834972.html
>> Sent from the FreeRadius - User mailing list archive at Nabble.com.
>> -
>> List info/subscribe/unsubscribe? Seehttp://www.freeradius.org/list/users.html
>
> -- 
> <http://www.horoa.net>
>
> Alexandre Chapellon
>
> Ingénierie des systèmes open sources et réseaux.
> Follow me on twitter: @alxgomz <http://www.twitter.com/alxgomz>
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110926/7d422010/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 6693 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110926/7d422010/attachment.png>