Fwd: FreeRadius Dictionary Attributes
Corey Jones
cvjones360 at gmail.com
Wed Apr 25 17:56:05 CEST 2012
---------- Forwarded message ----------
From: <freeradius-users-owner at lists.freeradius.org>
Date: Apr 25, 2012 11:35 AM
Subject: FreeRadius Dictionary Attributes
To: <cvjones360 at gmail.com>
You are not allowed to post to this mailing list, and your message has
been automatically rejected. If you think that your messages are
being rejected in error, contact the mailing list owner at
freeradius-users-owner at lists.freeradius.org.
---------- Forwarded message ----------
From: Corey Jones <cvjones360 at gmail.com>
To: freeradius-users at lists.freeradius.org
Cc:
Date: Wed, 25 Apr 2012 11:34:21 -0400
Subject: FreeRadius Dictionary Attributes
I'm trying to get a freeradius server up and running but I'm having trouble
with the attributes I've included in the master dictionary file showing up
in the detail file:
ATTRIBUTE client-mac-address 9001 string
ATTRIBUTE connect-progress 9002 string
ATTRIBUTE v92-info 9003 string
ATTRIBUTE disc-cause-ext 9004 string
The output of the detail-<date> file of the non-functioning server:
Acct-Session-Id = "XXXXXXX"
Framed-Protocol = PPP
Framed-IP-Address = xx.xx.xx.xx
Cisco-AVPair = "ppp-disconnect-cause=Missed too many keepalives"
User-Name = "xxxxxxx"
Acct-Authentic = RADIUS
Cisco-AVPair = "connect-progress=LAN Ses Up"
Cisco-AVPair = "nas-tx-speed=1000000000"
Cisco-AVPair = "nas-rx-speed=1000000000"
Acct-Session-Time = 5529
Acct-Input-Octets = 25782
Acct-Output-Octets = 210206
Acct-Input-Packets = 642
Acct-Output-Packets = 1063
Acct-Terminate-Cause = Port-Error
Cisco-AVPair = "disc-cause-ext=TCP Foreign Host Close"
Acct-Status-Type = Stop
NAS-Port-Type = Ethernet
NAS-Port = 46868628
NAS-Port-Id = "0/0/0/0"
Cisco-AVPair = "client-mac-address=0018.xxxx.xxxx"
Service-Type = Framed-User
NAS-IP-Address = xxx.xx.xx.xxx
Acct-Delay-Time = 0
Acct-Unique-Session-Id = "xxxxxxxxxxx"
Timestamp = 1335285815
Request-Authenticator = Verified
The output of the detail-<date> file for the functioning server:
Acct-Session-Id = "02CB0837"
Framed-Protocol = PPP
Framed-IP-Address = xx.xx.xx.xx
Cisco-AVPair = "ppp-disconnect-cause=Received LCP TERMREQ from peer"
User-Name = "xxxx"
Acct-Authentic = RADIUS
Cisco-AVPair = "connect-progress=LAN Ses Up"
Cisco-AVPair = "nas-tx-speed=1000000000"
Cisco-AVPair = "nas-rx-speed=1000000000"
Acct-Session-Time = 49017
Acct-Input-Octets = 37883277
Acct-Output-Octets = 960510015
Acct-Input-Packets = 472496
Acct-Output-Packets = 700063
Acct-Terminate-Cause = User-Request
Cisco-AVPair = "disc-cause-ext=PPP Receive Term"
Acct-Status-Type = Stop
NAS-Port-Type = Ethernet
NAS-Port = 46860343
NAS-Port-Id = "0/0/0/0"
Cisco-AVPair = "client-mac-address=0002.xxxx.xxxx"
Service-Type = Framed-User
NAS-IP-Address = xx.xx.xx.xx
Acct-Delay-Time = 0
connect-progress = "LAN Ses Up"
disc-cause-ext = "PPP Receive Term"
<---------------HERE
client-mac-address = "0002.xxxx.xxxx"
<---------------HERE
Acct-Unique-Session-Id = "cec563d48a98e45c"
Timestamp = 1335326506
Request-Authenticator = Verified
If you compare the non-functioning server output file to the functioning
server output file, there are two fields that are missing that are defined
in the master dictionary file.
disc-cause-ext = "PPP Receive Term" <---------------HERE
client-mac-address = "0002.xxxx.xxxx" <---------------HERE
I am having trouble with a different part of the server setup where that
file is pulled and those fields are read and needed by another application.
Does anyone know why those two fields are not pulled or processed on the
non-functioning server's output file?
freeradius -X dump of non-functioning server:
FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov 14
2010 at 21:12:30
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/ippool
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/sql.conf
including configuration file /etc/freeradius/sql/mysql/dialup.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
user = "xxxxx"
group = "xxxxx"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024000
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = yes
auth = yes
auth_badpass = yes
auth_goodpass = yes
}
security {
max_attributes = 200
reject_delay = 1
status_server = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = xxx
type = "auth"
secret = "xxxx"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "xxxxxxx"
nastype = "xxxxx"
}
client xxx.xxx.xxx.xxx {
require_message_authenticator = no
secret = "xxxxxxx"
shortname = "xxx"
nastype = "xxxx"
}
client xxx.xxx.xx.xxx {
require_message_authenticator = no
secret = "xxxxxxx"
shortname = "xxxxx"
nastype = "xxxx"
}
client xx.xxx.xxx.xx {
require_message_authenticator = no
secret = "xxxxxx"
shortname = "xxxx-c"
}
client xx.xx.xx.xx {
require_message_authenticator = no
secret = "xxxxxxx"
shortname = "xxxxxx"
}
client x.xx.xxx.xx {
require_message_authenticator = no
secret = "xxxxxxx"
shortname = "xxxxx"
}
client xx.xx.xx.xx {
require_message_authenticator = no
secret = "xxxxx"
shortname = "SmartFile_Develop"
}
client x.xx.xx.xx {
require_message_authenticator = no
secret = "xxxxxx"
shortname = "xxxx"
}
client xx.xx.xx.xx {
require_message_authenticator = no
secret = "xxxxx"
shortname = "xxxx"
}
client xxx.xxx.xx.xx {
require_message_authenticator = no
secret = "xxxxxx"
shortname = "xxxx"
}
client xx.xx.xx.xx {
require_message_authenticator = no
secret = "xxxxx"
shortname = "xxxxx"
}
client xx.xx.xxx.xx {
require_message_authenticator = no
secret = "xxxx"
shortname = "xxxx"
}
client xxx.xxx.xxx.xx {
require_message_authenticator = no
secret = "xxxxx"
shortname = "xxxx"
}
client xxx.xx.xx.xx {
require_message_authenticator = no
secret = "xxxxx"
shortname = "xxxxx"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "xxxxxx"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file
/etc/freeradius/modules/digest
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_detail
Module: Instantiating module "auth_log" from file
/etc/freeradius/modules/detail.log
detail auth_log {
detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /etc/freeradius/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = "xxx"
login = "xxxxx"
password = "xxxxxxx"
radius_db = "xxxxx"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/radius/sqltrace.sql"
readclients = no
deletestalesessions = yes
num_sql_socks = 10
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server
FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}'
ORDER BY id"
DER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname =
'%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname =
'%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
unix_timestamp('%S') -
unix_timestamp(acctstarttime), acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
%{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL
AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime
<= '%S'"
accounting_update_query = " UPDATE radacct SET
framedipaddress = '%{Framed-IP-Address}',
acctsessiontime = '%{Acct-Session-Time}', acctinputoctets
= '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username = '%{SQL-User-Name}'
AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype,
acctstarttime, acctsessiontime, acctauthentic,
connectinfo_start, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, servicetype,
framedprotocol, framedipaddress, acctstartdelay,
xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND),
'%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype,
acctstarttime, acctstoptime, acctsessiontime,
acctauthentic, connectinfo_start, connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, acctterminatecause, servicetype,
framedprotocol, framedipaddress, acctstartdelay,
acctstopdelay, xascendsessionsvrkey) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL,
'0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET
acctstarttime = '%S', acctstartdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_start =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND nasipaddress
= '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
'%{Acct-Session-Time}', acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND
nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND), '%S',
'%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM usergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress,
callingstationid, framedprotocol
FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES (
'%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to xxxxx at localhost:xxxx/xxxxx
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): starting 5
rlm_sql (sql): Attempting to connect rlm_sql_mysql #5
rlm_sql_mysql: Starting connect to MySQL server for #5
rlm_sql (sql): Connected new DB handle, #5
rlm_sql (sql): starting 6
rlm_sql (sql): Attempting to connect rlm_sql_mysql #6
rlm_sql_mysql: Starting connect to MySQL server for #6
rlm_sql (sql): Connected new DB handle, #6
rlm_sql (sql): starting 7
rlm_sql (sql): Attempting to connect rlm_sql_mysql #7
rlm_sql_mysql: Starting connect to MySQL server for #7
rlm_sql (sql): Connected new DB handle, #7
rlm_sql (sql): starting 8
rlm_sql (sql): Attempting to connect rlm_sql_mysql #8
rlm_sql_mysql: Starting connect to MySQL server for #8
rlm_sql (sql): Connected new DB handle, #8
rlm_sql (sql): starting 9
rlm_sql (sql): Attempting to connect rlm_sql_mysql #9
rlm_sql_mysql: Starting connect to MySQL server for #9
rlm_sql (sql): Connected new DB handle, #9
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Instantiating module "detail" from file
/etc/freeradius/modules/detail
detail {
detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_sql_log
Module: Instantiating module "sql_log" from file
/etc/freeradius/modules/sql_log
sql_log {
path = "/var/log/radius/radacct/sql-relay"
Post-Auth = "INSERT INTO radpostauth (username,
pass, reply, authdate) VALUES ('%{User-Name}',
'%{User-Password:-Chap-Password}', '%{reply:Packet-Type}',
'%S');"
sql_user_name = "%{%{User-Name}:-DEFAULT}"
utf8 = no
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
Module: Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = xx.xx.xxx.xxx
port = 0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120425/1aa49880/attachment-0001.html>
More information about the Freeradius-Users
mailing list