Acct-Interim-Interval session time not working

[dulan]

use like follows

*Acct-Interim-Interval := 60*

if you use Database you should insert this data to *radraply *table




On Thu, Feb 16, 2012 at 12:59 PM, oportino [via FreeRadius] <
ml-node+s1045715n5488744h83 at n5.nabble.com> wrote:

> Hello all,
>
> I am using freeradius 2.1.0 on Ubuntu 10.10 and using rp-pppoe server and
> chillispot server for user login authentication method on same machine and
> set up radius attribute for end user such as
> #-------------------------------------------------------------------------------------
>
> *radtest   abc   abc123   127.0.0.1  0   SecretKey*
> Sending Access-Request of id 185 to 127.0.0.1 port 1812
>         User-Name = "abc"
>         User-Password = "abc123"
>         NAS-IP-Address = 127.0.1.1
>         NAS-Port = 0
> rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185,
> length=80
>         Idle-Timeout = 600
>         WISPr-Bandwidth-Max-Down = 100000000
>         WISPr-Bandwidth-Max-Up = 100000000
>         *Acct-Interim-Interval = 60*
>         Acct-Status-Type = Interim-Update
>         *Session-Timeout = 300*
>
> ( All  user can login all of session is 5mins )
> #-------------------------------------------------------------------------------------
>
>
> 1.After first use logged in  ( with pppoe or chillispot) the user "abc"
> use the network times 200secs  (left time=100secs) and logged off later.
>
> 2.The user "abc"  logged in again with radius message
>         User-Name = "abc"
>         User-Password = "abc123"
>         NAS-IP-Address = 127.0.1.1
>         NAS-Port = 0
> rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185,
> length=80
>         Idle-Timeout = 600
>         WISPr-Bandwidth-Max-Down = 100000000
>         WISPr-Bandwidth-Max-Up = 100000000
>         *Acct-Interim-Interval = 60*
>         Acct-Status-Type = Interim-Update
>         *Session-Timeout = 100*
>
>  During live logged in session , In the radius database and radacct table
> has 2 record insert (first record is first login and *secondary record is
> now login*)
>
>  I delete the first database record (use time= 200secs) so that the
> attribute Acct-Interim-Interval it is  updating  all sessiontime count to 0
> and "abc" can use the network 300secs. But it is not updating session and
> the user "abc" was terminate after 100 secs normally  by AcctTerminateCause
>  is "Session-Timeout" .
>
>      What does debug or how?
>
> Thanking for every thing.
>
>
>
> ------------------------------
>  If you reply to this email, your message will be added to the discussion
> below:
>
> http://freeradius.1045715.n5.nabble.com/Acct-Interim-Interval-session-time-not-working-tp5488744p5488744.html
>  To unsubscribe from FreeRadius, click here<http://freeradius.1045715.n5.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=2740692&code=YWNoaW50aGF1QGdtYWlsLmNvbXwyNzQwNjkyfC0xNDExMDc0NTA0>
> .
> NAML<http://freeradius.1045715.n5.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>



-- 
Best Regards..
Achintha Udukumbura


--
View this message in context: http://freeradius.1045715.n5.nabble.com/Acct-Interim-Interval-session-time-not-working-tp5488744p5489311.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120216/be381f5e/attachment.html>