Help needed configuring MAB on FreeRADIUS and Cisco switch

[Kaya Saman]

>
>
> So now for my Cisco lines I have this:
>
>
> radius-server dead-criteria time 30 tries 3
> radius-server host 10.0.0.90 auth-port 1812 acct-port 1813 non-standard key pass
> radius-server retransmit 6
> radius-server timeout 10
> radius-server vsa send accounting
> radius-server vsa send authentication
>
>
> interface GigabitEthernet0/13
>  switchport mode access
>  authentication event server alive action reinitialize
>  authentication open
>  authentication order mab
>  authentication priority mab
>  authentication port-control auto
>  authentication timer reauthenticate 10
>  authentication timer inactivity 1200
>  mab
>  dot1x pae authenticator
>  dot1x timeout tx-period 6
>  spanning-tree portfast
>
>
>

Though resetting them to the config I had originally doesn't seem to
make any difference either??