unable to authenticate with Crypt-Password
abrooks
abrooks at seachange.ca
Tue Jun 5 21:21:57 CEST 2012
Hello
I cannot get my freeradius server to authenticate using a users file which
is used successfully on a couple of older servers. I'm trying to replace
one of the old machines with a VM running on a ubuntu host using VirtualBox.
I am running a ubuntu 10.04 64 bit virtual server with FreeRADIUS Version
2.1.8, for host x86_64-pc-linux-gnu, built on Jan 5 2010 at 02:56:18
installed using apt-get install.
I use a users list to authenticate. My users file is commented out except
for 3 lines:
bob Cleartext-Password := "hello"
$INCLUDE users.1003512
$INCLUDE users.1033872
-bob was added for testing
users.1003512 and user1033827 are identically formatted.
Here is a sample from users.1033872:
abrooks1 at iroam.uk Crypt-Password == "$1$BbFRsHhY$.Qcjjczle/i94ILxuajvT/"
Auth-Type = Crypt-Local,
User-Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 255.255.255.254,
Framed-Netmask = 255.255.255.255,
Framed-Routing = None,
Framed-Compression = Van-Jacobsen-TCP-IP,
Framed-MTU = 1500
abrooks2 at iroam.uk Crypt-Password == "$1$mqZm0XU5$4ZGIcC.9AdoDvqdGQDpNo0"
User-Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 255.255.255.254,
Framed-Netmask = 255.255.255.255,
Framed-Routing = None,
Framed-Compression = Van-Jacobsen-TCP-IP,
Framed-MTU = 1500
I use these same users files on two older, working Freeradius servers.
I always get rejected using radtest:
radtest abrooks2 at iroam.uk 1234512345 localhost 1812 mysecret
/etc/freeradius# freeradius -X start
FreeRADIUS Version 2.1.8, for host x86_64-pc-linux-gnu, built on Jan 5 2010
at 02:56:18
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/radutmp
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = yes
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "mysecret"
response_window = 20
max_outstanding = 65536
require_message_authenticator = no
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
authhost = LOCAL
accthost = LOCAL
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "mysecret"
nastype = "other"
}
client 192.168.0.0/16 {
require_message_authenticator = no
secret = "mysecret"
shortname = "private-network-2"
}
client 192.168.1.112 {
require_message_authenticator = no
secret = "mysecret"
shortname = "Roamer"
}
client 192.139.22.14 {
require_message_authenticator = no
secret = "mysecret"
shortname = "Roamer-Exterior"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = yes
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/etc/freeradius/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 45526, id=57,
length=69
User-Name = "abrooks2 at iroam.uk"
User-Password = "1234512345"
NAS-IP-Address = 127.0.1.1
NAS-Port = 1812
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "iroam.uk" for User-Name = "abrooks2 at iroam.uk"
[suffix] No such realm "iroam.uk"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry abrooks2 at iroam.uk at line 11
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
No authenticate method (Auth-Type) configuration found for the request:
Rejecting the user
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> abrooks2 at iroam.uk
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 57 to 127.0.0.1 port 45526
Waking up in 4.9 seconds.
Cleaning up request 0 ID 57 with timestamp +4
Ready to process requests.
Cleartext Password test:
I enter this radtest:
radtest bob hello localhost 1812 mysecret
Here is my freeradius -X output:
rad_recv: Access-Request packet from host 127.0.0.1 port 34596, id=1,
length=55
User-Name = "bob"
User-Password = "hello"
NAS-IP-Address = 127.0.1.1
NAS-Port = 1812
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bob", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry bob at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
+- entering group PAP {...}
[pap] login attempt with password "hello"
[pap] Using clear text password "hello"
[pap] User authenticated successfully
++[pap] returns ok
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 1 to 127.0.0.1 port 34596
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
--
View this message in context: http://freeradius.1045715.n5.nabble.com/unable-to-authenticate-with-Crypt-Password-tp5713570.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
More information about the Freeradius-Users
mailing list