WING-ASN throwing error - Mandatory HA Mode parameter

[Iliya Peregoudov]

I've looked into the pcap file. WiMAX-HA-RK-Lifetime, WiMAX-HA-RK-SPI, 
WiMAX-HA-RK-Key, and WiMAX-FA-RK-SPI attributes are there. My Wireshark 
does not show their names, but they are there:

WiMAX-HA-RL-Lifetime = 900
   VSA: l=7 t=Unknown-Attribute(17): 0000000384
WiMAX-HA-RK-SPI = 0
   VSA: l=7 t=Unknown-Attribute(16): 0000000000
WiMAX-HA-RK-Key = 0xA2DD89C4...
   VSA: l=37 t=Unknown-Attribute(15): 00A2DD89C4...
WiMAX-FA-RK-SPI = 2474926121
   VSA: l=7 t=Unknown-Attribute(61): 0093846029

Go ask ASN-GW vendor what's going on.


Rathod Subhashchandra wrote:
> Dear Fajar,
> 
> ACCESS-ACCEPT screen logs shows following attributes but not in pcap.
> Screen logs:
> Sending Access-Accept of id 6 to 125.125.40.38 port 1812
> 	WiMAX-MN-NAI = "user at tataelxsi.com"
> 	Service-Type = Authenticate-Only
> 	State = 0xd2be425bd6b84f57c4a7ea648e1803b6
> 	MS-MPPE-Recv-Key =
> 0xd967448623358aa2149aee72c8d59c7640ca9b7fb4c06836781533bb9ae7679d
> 	MS-MPPE-Send-Key =
> 0x49a17afa5f030067f31c8a3e44d14e88a312af0a90e1299e73019fa1c27e7fb3
> 	WiMAX-MSK =
> 0xd967448623358aa2149aee72c8d59c7640ca9b7fb4c06836781533bb9ae7679d49a17afa5f
> 030067f31c8a3e44d14e88a312af0a90e1299e73019fa1c27e7fb3
> 	EAP-Message = 0x03060004
> 	Message-Authenticator = 0x00000000000000000000000000000000
> 	User-Name = "user at tataelxsi.com"
> 	WiMAX-IP-Technology = PMIP4
> 	WiMAX-hHA-IP-MIP4 = 172.16.104.175
> 	WiMAX-DNS-Server = 192.168.10.3
> 	WiMAX-Accounting-Capabilities = IP-Session-Based
> 	WiMAX-Idle-Mode-Notification-Cap = Supported
> 	WiMAX-AAA-Session-Id = 0x30313032
> 	WiMAX-Packet-Data-Flow-Id = 1
> 	WiMAX-Service-Data-Flow-Id = 1
> 	WiMAX-Service-Profile-Id = 1
> 	WiMAX-Direction = Bi-Directional
> 	WiMAX-FA-RK-Key = 0xb977ed6f9bf2231bba840d7cf1c02cd1bd7f47fa
> 	Framed-IP-Address = 192.168.10.3
> 	Session-Timeout = 172800
> 	Termination-Action = 3
> 	Chargeable-User-Identity = "user at tataelxsi.com"
> 	WiMAX-HA-RK-Lifetime = 900
> 	WiMAX-HA-RK-SPI = 0
> 	WiMAX-HA-RK-Key = 0x2b83c9fd0e5c3e2f8af0aa4464ba27ff8372fe4b
> 	WiMAX-FA-RK-SPI = 2474926121
> 
> 
> The content of Wireshark is attached.
> Wireshark ACCESS-ACCEPT message does not reflect WiMAX-HA-RK-Lifetime,
> WiMAX-HA-RK-SPI, WiMAX-HA-RK-Key, and WiMAX-FA-RK-SPI.
> 
> Does it mean that above attributes are not added in the message and simply
> printed by FreeRadius server? Or Vendor specific HA mode parameters are
> different?