Wimax with Free radius

[Mulindwa]

I have it enabled

 
Eric M


________________________________
 From: David Peterson <davidp at wirelessconnections.net>
To: freeradius-users at lists.freeradius.org 
Sent: Monday, March 5, 2012 2:46 PM
Subject: RE: Wimax with Free radius
 

Did you enable the WiMax module?
 
David
 
From:freeradius-users-bounces+davidp=wirelessconnections.net at lists.freeradius.org [mailto:freeradius-users-bounces+davidp=wirelessconnections.net at lists.freeradius.org] On Behalf Of Mulindwa
Sent: Monday, March 05, 2012 6:16 AM
To: freeradius-users at lists.freeradius.org
Subject: RE: Wimax with Free radius
 
Hallo there, i have an issue with my wimax setup, am trying to have my users authenticate using the wonderful freeradius but still failing.
 
Am suing WASN9970 and using freeradius 2.1.12,
 
When i turn on radius using radius-X, this is what  i get, and client never authenticates
someone please come to my rescue
 
istening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 196.0.4.18 port 1812, id=250, length=187
        User-Name = "gulucdp at utmax"
        NAS-IP-Address = 192.168.224.70
        Calling-Station-Id = "6416f00100e1"
        NAS-Identifier = "WASN9770"
        Event-Timestamp = "Mar  5 2012 09:14:53 EAT"
        EAP-Message = 0x020100120167756c756364704075746d6178
        WiMAX-Release = "1.1"
        WiMAX-Accounting-Capabilities = Flow-Based
        WiMAX-BS-Id = 0x303030303038316235393030
        WiMAX-GMT-Timezone-offset = 10800
        NAS-Port-Type = Wireless-802.16
        WiMAX-Available-In-Client = 3
        Service-Type = Framed-User
        Message-Authenticator = 0x143b601c01eca1d4595511b0a81c0d78
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120305
[auth_log] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120305
[auth_log]      expand: %t -> Mon Mar  5 08:59:56 2012
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
++[wimax] returns ok
[suffix] Looking up realm "utmax" for User-Name = "gulucdp at utmax"
[suffix] Found realm "utmax"
[suffix] Adding Realm = "utmax"
[suffix] Authentication realm is LOCAL.
++[suffix] returns ok
[eap] EAP packet type response id 1 length 18
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 125
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 250 to 196.0.4.18 port 1812
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-Address = 255.255.255.254
        Framed-Netmask = 255.255.255.255
        EAP-Message = 0x0102001604101bd377e252fa3b4f59a9210cb6a3fdfb
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0dc4c5bf0dc6c1ff885e3d68e8e55b4e
Finished request 0.
 
Eric M
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120305/3a7f4b0d/attachment.html>