Wimax with Free radius

Mulindwa meric_l at yahoo.com
Tue Mar 6 12:03:04 CET 2012


Hi Fajar and Alan,

am still having a challenge and seeking your guidance, i have this account in my users file as shown below;



reporter at utmax Cleartext-Password := "atom"
                Service-Type = Framed-User,
                 Framed-Protocol = PPP,
                 Framed-Address = 255.255.255.254,
                Framed-Netmask = 255.255.255.255,
                Fall-Through = 0

 

However, client still can not connect and this is the log below, what could be the issue?

rad_recv: Access-Request packet from host 196.0.4.18 port 1812, id=249, length=189
        User-Name = "reporter at utmax"
        NAS-IP-Address = 192.168.224.70
        Calling-Station-Id = "0c4c39b782dd"
        NAS-Identifier = "WASN9770"
        Event-Timestamp = "Mar  6 2012 14:33:06 EAT"
        EAP-Message = 0x02010013017265706f727465724075746d6178
        WiMAX-Release = "1.1"
        WiMAX-Accounting-Capabilities = Flow-Based
        WiMAX-BS-Id = 0x303030303038303366633230
        WiMAX-GMT-Timezone-offset = 10800
        NAS-Port-Type = Wireless-802.16
        WiMAX-Available-In-Client = 3
        Service-Type = Framed-User
        Message-Authenticator = 0xc547707138b93ae18c61dc60ebd63974
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120306
[auth_log] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120306
[auth_log]      expand: %t -> Tue Mar  6 14:18:26 2012
++[auth_log] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
++[wimax] returns ok
[suffix] Looking up realm "utmax" for User-Name = "reporter at utmax"
[suffix] Found realm "utmax"
[suffix] Adding Realm = "utmax"
[suffix] Authentication realm is LOCAL.
++[suffix] returns ok
[eap] EAP packet type response id 1 length 19
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry reporter at utmax at line 134
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 249 to 196.0.4.18 port 1812
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-Address = 255.255.255.254
        Framed-Netmask = 255.255.255.255
        EAP-Message = 0x0102001604105bb61822dad6bbb70866f6e6fd6800b5
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xdfea5fdcdfe85b2a10496a6255f7cdae
Finished request 33

Eric M


________________________________
 From: Fajar A. Nugraha <list at fajar.net>
To: FreeRadius users mailing list <freeradius-users at lists.freeradius.org> 
Sent: Tuesday, March 6, 2012 1:10 PM
Subject: Re: Wimax with Free radius
 
On Tue, Mar 6, 2012 at 4:11 PM, Alan DeKok <aland at deployingradius.com> wrote:
> Mulindwa wrote:
>> So far looks good only that users are not authenticating yet.
>
>  You cannot set "Auth-Type := Accept" for WiMAX connections.  It won't
> work.  It's impossible.
>

Ooops. My bad.

Wiki updated.

-- 
Fajar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120306/33491b81/attachment.html>


More information about the Freeradius-Users mailing list